Free CAT library

Solution Blending & Concentration Equilibriums

Master the Solute Invariance Principle, calculate dilution with pure solvents (0% solute) or pure solutes (100%), blend vessel mixtures in arbitrary volume ratios, and solve evaporation models.

1. The Story & Mental Model: The Invariant Solute

Imagine dissolving 100 grams100\text{ grams} of pure crystalline sugar into a glass containing 400 grams400\text{ grams} of warm water. The total solution weighs 500 grams500\text{ grams}, and the sugar concentration is 100500=20%\frac{100}{500} = 20\%.

Now, leave the glass under the hot summer sun for three days. Half the water evaporates into the atmosphere. The water volume has shrunk dramatically, but what happened to the sugar molecules?

Not a single sugar molecule evaporated! The physical mass of sugar remains exactly 100 grams100\text{ grams}.

Because the sugar mass is invariant while the water shrank, the sugar concentration doubles:

New Concentration=100g250g=40%!\text{New Concentration} = \frac{100\text{g}}{250\text{g}} = \mathbf{40\%!}

In quantitative chemistry and arithmetic, this is the Solute Invariance Principle: tracking the substance that is neither added nor removed yields instant, one-step solutions.


2. The CAT Question Blueprint: The Structural Variations

Mixture and solution problems appear in four standard templates:

  1. Adding Pure Diluent (Water / Solvent): Increasing solvent volume while solute mass is frozen. Concentration of added liquid is 0%0\%.

  2. Adding Pure Solute (Acid / Salt): Dissolving pure solute into a solution. Concentration of added liquid is 100%100\%.

  3. Evaporation by Boiling / Dehydration: Heating a solution so that pure solvent escapes, increasing solute concentration.

  4. Vessel Proportion Blending: Taking liquids from two jars (each having different acid:water ratios) in volume ratio m:nm : n.


3. The Single Tactical Weapon: The Solute Mass Equation

A. General Solute Conservation:

V1C1+V2C2=(V1+V2)CfinalV_1 C_1 + V_2 C_2 = (V_1 + V_2) C_{\text{final}}

Where ViV_i represents solution volume and CiC_i represents percentage concentration of the solute.

B. The Zero and Hundred Rules:

  • Adding Pure Water: Set C2=0%C_2 = 0\%

    V1C1=(V1+Vwater)Cfinal  ⟹  Vwater=V1(C1−CfinalCfinal)V_1 C_1 = (V_1 + V_{\text{water}}) C_{\text{final}} \implies V_{\text{water}} = V_1 \left(\frac{C_1 - C_{\text{final}}}{C_{\text{final}}}\right)

  • Adding Pure Solute: Set C2=100%C_2 = 100\%

    V1C1+Vsolute(100)=(V1+Vsolute)CfinalV_1 C_1 + V_{\text{solute}}(100) = (V_1 + V_{\text{solute}}) C_{\text{final}}

C. Vessel Blending in Ratio m:nm : n:

If Vessel A has ratio a1:b1a_1 : b_1 (solute fraction f1=a1a1+b1f_1 = \frac{a_1}{a_1 + b_1}) and Vessel B has ratio a2:b2a_2 : b_2 (solute fraction f2=a2a2+b2f_2 = \frac{a_2}{a_2 + b_2}), when mixed in volume ratio m:nm : n:

Final Solute Fraction F=m⋅f1+n⋅f2m+n\text{Final Solute Fraction } F = \frac{m \cdot f_1 + n \cdot f_2}{m + n}


4. The Classic Exam Trap & Speed Shortcut

The Ratio-Part Denominator Trap:

If Vessel A has acid:water 3:23:2, the acid concentration is 33+2=35=60%\frac{3}{3+2} = \frac{3}{5} = \mathbf{60\%}, NOT 32\frac{3}{2}! Always normalize by the sum of ratio parts.

The Frozen Solute Invariance Shortcut:

If a 60L60\text{L} solution has 80%80\% acid and you add water to make it 60%60\% acid:

  • Initial acid =60×0.80=48L= 60 \times 0.80 = 48\text{L}.
  • New total volume must satisfy: 48L=60% of Vnew  ⟹  Vnew=480.60=80L48\text{L} = 60\% \text{ of } V_{\text{new}} \implies V_{\text{new}} = \frac{48}{0.60} = 80\text{L}.
  • Water added =80−60=20L= 80 - 60 = \mathbf{20\text{L}}. Solved mentally!

Formulas

Solute Conservation Equation

V1C1+V2C2=(V1+V2)CfinalV_1 C_1 + V_2 C_2 = (V_1 + V_2) C_{\text{final}}

Fundamental mass-balance equation for blending two solutions
Pure Water Dilution Formula

Vwater=V1(C1Cfinal−1)V_{\text{water}} = V_1 \left(\frac{C_1}{C_{\text{final}}} - 1\right)

Calculates water required to dilute concentration from C1 to C_final
Pure Solute Addition Formula

Vsolute=V1(Cfinal−C1100−Cfinal)V_{\text{solute}} = V_1 \left(\frac{C_{\text{final}} - C_1}{100 - C_{\text{final}}}\right)

Calculates pure solute needed to raise concentration to C_final
Vessel Ratio Blending

Fsolute=m(a1a1+b1)+n(a2a2+b2)m+nF_{\text{solute}} = \frac{m \left(\frac{a_1}{a_1 + b_1}\right) + n \left(\frac{a_2}{a_2 + b_2}\right)}{m + n}

Normalizes vessel fractions when mixed in volume ratio m : n

Traps and tips

  • Track the invariant component: In dilution problems, track the solute (acid/alcohol); in evaporation, track the non-volatile solids.
  • Pure water has 0% solute: In alligation, water enters as 0%.
  • Pure solute has 100% concentration: In alligation, pure acid or salt enters as 100%.
  • Ratio parts normalize: Milk:Water = 4:1 means 4/5 milk. Milk:Water = 3:2 means 3/5 milk.

Solved examples

Example 4.4.1: Diluting Concentrated Acid with Pure Water

An industrial laboratory storage vat holds 60 liters60\text{ liters} of an 80.0%80.0\% hydrochloric acid solution. How many liters of pure distilled water must the lab technician add to the vat to reduce the acid concentration to 60.0%60.0\%?

Show solution

Step 1: Identify the invariant substance.

Pure water is being added. Therefore, the absolute volume of pure hydrochloric acid is unchanged.

Step 2: Calculate the invariant volume of pure acid.

Vpure acid=80.0% of 60 liters=0.80×60=48 litersV_{\text{pure acid}} = 80.0\% \text{ of } 60\text{ liters} = 0.80 \times 60 = 48\text{ liters}

Step 3: Relate pure acid to the new total solution volume (VnewV_{\text{new}}).

In the diluted solution, this 48 liters48\text{ liters} must constitute 60.0%60.0\% of the total volume:

48=60.0% of Vnew=0.60×Vnew48 = 60.0\% \text{ of } V_{\text{new}} = 0.60 \times V_{\text{new}}

Vnew=480.60=80 litersV_{\text{new}} = \frac{48}{0.60} = 80\text{ liters}

Step 4: Compute volume of water added.

Vwater added=Vnew−Vold=80−60=20 litersV_{\text{water added}} = V_{\text{new}} - V_{\text{old}} = 80 - 60 = 20\text{ liters}

The technician must add 20 liters20\text{ liters} of distilled water.

Takeaway: The 48 liters of acid must constitute 60% of the new solution. New volume is 48 / 0.6 = 80 liters, so water added is 80 - 60 = 20 liters.

Example 4.4.2: Concentrating Brine by Adding Pure Salt

A food processing plant has 400 grams400\text{ grams} of a 15.0%15.0\% saline (salt) solution. How many grams of pure crystalline salt (100%100\% solute) must be dissolved into the solution to increase its salinity concentration to 32.0%32.0\%?

Show solution

Step 1: Apply the Alligation method.

  • Existing solution concentration c=15.0%c = 15.0\%

  • Added pure salt concentration d=100.0%d = 100.0\%

  • Target mean concentration m=32.0%m = 32.0\%

Step 2: Calculate cross differences.

  • d−m=100.0−32.0=68.0d - m = 100.0 - 32.0 = 68.0

  • m−c=32.0−15.0=17.0m - c = 32.0 - 15.0 = 17.0

WsolutionWpure salt=68.017.0=41\frac{W_{\text{solution}}}{W_{\text{pure salt}}} = \frac{68.0}{17.0} = \frac{4}{1}

Step 3: Solve for pure salt weight.

Given Wsolution=400 gramsW_{\text{solution}} = 400\text{ grams}:

400=4 parts  ⟹  1 part=100 grams400 = 4\text{ parts} \implies 1\text{ part} = 100\text{ grams}

Wpure salt=100 gramsW_{\text{pure salt}} = 100\text{ grams}

The plant must add 100 grams100\text{ grams} of pure salt.

Takeaway: Using Alligation with pure salt as 100%: (100 - 32) : (32 - 15) = 68 : 17 = 4 : 1. If 4 parts = 400g, then 1 part = 100g pure salt.

Example 4.4.3: Blending Two Chemical Solutions

A pharmaceutical manufacturer needs to formulate a 48.0%48.0\% isopropyl alcohol sanitizing solution by blending Solution Alpha (30.0%30.0\% alcohol) and Solution Beta (60.0%60.0\% alcohol). In what volume ratio must Solution Alpha and Solution Beta be mixed?

Show solution

Step 1: Apply Alligation on alcohol concentrations.

  • Solution Alpha c=30.0%c = 30.0\%

  • Solution Beta d=60.0%d = 60.0\%

  • Target concentration m=48.0%m = 48.0\%

Step 2: Calculate cross differences.

  • d−m=60.0−48.0=12.0d - m = 60.0 - 48.0 = 12.0

  • m−c=48.0−30.0=18.0m - c = 48.0 - 30.0 = 18.0

VαVβ=12.018.0=23\frac{V_\alpha}{V_\beta} = \frac{12.0}{18.0} = \frac{2}{3}

Solution Alpha and Solution Beta must be mixed in the volume ratio 2:32 : 3.

Takeaway: Cross differences are 12 and 18. The mixing ratio is 12:18 = 2:3.

Example 4.4.4: Vessel Proportion Blending in Ratio 2 : 3

Vessel A contains a mixture of milk and water in the ratio 3:23 : 2. Vessel B contains a mixture of milk and water in the ratio 4:14 : 1. Liquids from Vessel A and Vessel B are drawn and mixed together in the volume ratio 2:32 : 3. Determine the ratio of milk to water in the final blended mixture.

Show solution

Step 1: Express milk fractions in each vessel.

  • Vessel A: Milk fraction fA=33+2=35f_A = \frac{3}{3 + 2} = \frac{3}{5}

  • Vessel B: Milk fraction fB=44+1=45f_B = \frac{4}{4 + 1} = \frac{4}{5}

Step 2: Normalize with mixing volume ratio 2:32 : 3.

Let volume drawn from Vessel A be 2 units2\text{ units} and from Vessel B be 3 units3\text{ units}.

Total Milk=2×35+3×45=6+125=185\text{Total Milk} = 2 \times \frac{3}{5} + 3 \times \frac{4}{5} = \frac{6 + 12}{5} = \frac{18}{5}

Total Water=2×25+3×15=4+35=75\text{Total Water} = 2 \times \frac{2}{5} + 3 \times \frac{1}{5} = \frac{4 + 3}{5} = \frac{7}{5}

Step 3: Formulate final ratio of Milk to Water.

MilkWater=18575=187\frac{\text{Milk}}{\text{Water}} = \frac{\frac{18}{5}}{\frac{7}{5}} = \frac{18}{7}

The ratio of milk to water in the final mixture is 18:718 : 7.

Takeaway: Multiply volume weights by component fractions: Milk = 2 (3/5) + 3 (4/5) = 18/5; Water = 2 (2/5) + 3 (1/5) = 7/5. Ratio is 18:7.

Example 4.4.5: Dehydration by Evaporation

A vat contains 50.0 liters50.0\text{ liters} of freshly extracted citrus juice consisting of 10.0%10.0\% fruit pulp and 90.0%90.0\% water. The vat is heated, causing a portion of the water to evaporate, resulting in a concentrated puree containing 25.0%25.0\% fruit pulp. How many liters of water evaporated during the heating process?

Show solution

Step 1: Identify the invariant substance.

Water evaporates; the absolute physical volume of fruit pulp is strictly invariant.

Step 2: Calculate invariant volume of pulp.

Vpulp=10.0% of 50.0 liters=0.10×50.0=5.0 litersV_{\text{pulp}} = 10.0\% \text{ of } 50.0\text{ liters} = 0.10 \times 50.0 = 5.0\text{ liters}

Step 3: Relate pulp to the new concentrated volume (VnewV_{\text{new}}).

In the concentrated puree, this 5.0 liters5.0\text{ liters} constitutes 25.0%25.0\% (14\frac{1}{4}) of the volume:

5.0=25.0% of Vnew=14Vnew5.0 = 25.0\% \text{ of } V_{\text{new}} = \frac{1}{4} V_{\text{new}}

Vnew=5.0×4=20.0 litersV_{\text{new}} = 5.0 \times 4 = 20.0\text{ liters}

Step 4: Compute evaporated water volume.

Vevaporated=Vold−Vnew=50.0−20.0=30.0 litersV_{\text{evaporated}} = V_{\text{old}} - V_{\text{new}} = 50.0 - 20.0 = 30.0\text{ liters}

30.0 liters30.0\text{ liters} of water evaporated.

Takeaway: The 5 liters of pulp is unchanged. In a 25% puree, total volume must be 5 / 0.25 = 20 liters. Water evaporated is 50 - 20 = 30 liters.

Example 4.4.6: Multi-Phase Replacement in a Two-Component Mixture

A storage barrel contains a mixture of pure milk and water in the ratio 7:57 : 5. When 9.0 liters9.0\text{ liters} of the mixture are drawn off and the barrel is refilled completely with pure water, the ratio of milk to water becomes 7:97 : 9. Determine the total capacity of the barrel.

Show solution

Step 1: Understand the replacement dynamics.

When 9L9\text{L} of mixture is removed, the remaining liquid still maintains the original ratio of 7:57 : 5 (Milk : Water).

Let the remaining volume be VremV_{\text{rem}}.

  • Milk in remaining liquid =712Vrem= \frac{7}{12} V_{\text{rem}}

  • Water in remaining liquid =512Vrem= \frac{5}{12} V_{\text{rem}}

Step 2: Add 9L9\text{L} of pure water to refill to full capacity (VV).

After adding 9L9\text{L} of pure water:

  • Total Milk remains =712Vrem= \frac{7}{12} V_{\text{rem}}

  • Total Water becomes =512Vrem+9= \frac{5}{12} V_{\text{rem}} + 9

Step 3: Equate to the new ratio 7:97 : 9.

712Vrem512Vrem+9=79\frac{\frac{7}{12} V_{\text{rem}}}{\frac{5}{12} V_{\text{rem}} + 9} = \frac{7}{9}

Divide both numerators by 77:

112Vrem512Vrem+9=19\frac{\frac{1}{12} V_{\text{rem}}}{\frac{5}{12} V_{\text{rem}} + 9} = \frac{1}{9}

9×(112Vrem)=512Vrem+99 \times \left(\frac{1}{12} V_{\text{rem}}\right) = \frac{5}{12} V_{\text{rem}} + 9

912Vrem−512Vrem=9\frac{9}{12} V_{\text{rem}} - \frac{5}{12} V_{\text{rem}} = 9

412Vrem=9  ⟹  13Vrem=9  ⟹  Vrem=27 liters\frac{4}{12} V_{\text{rem}} = 9 \implies \frac{1}{3} V_{\text{rem}} = 9 \implies V_{\text{rem}} = 27\text{ liters}

Step 4: Compute full initial barrel capacity (VV).

V=Vrem+9 liters drawn=27+9=36 litersV = V_{\text{rem}} + 9\text{ liters drawn} = 27 + 9 = 36\text{ liters}

The barrel has a total capacity of 36 liters36\text{ liters}.

Takeaway: In the remaining liquid, milk:water is 7:5. Adding 9L water shifts it to 7:9. The water increases by 4 parts = 9L on a 12-part scale, yielding total capacity = 36 liters.

Practice questions

Question 1 · CAT Level

Vessel A contains a mixture of milk and water in the ratio 4:14 : 1, and Vessel B contains milk and water in the ratio 2:32 : 3. Contents from Vessel A and Vessel B are combined together with an additional quantity of pure milk into a large vat. If the volume of pure milk added is equal to 20%20\% of the volume taken from Vessel B, and the final mixture in the vat contains milk and water in the ratio 3:13 : 1, what is the ratio of the volume taken from Vessel A to the volume taken from Vessel B?

  1. A

    4:14 : 1

  2. B

    5:15 : 1

  3. C

    6:16 : 1

  4. D

    7:27 : 2

Show answer and explanation

Answer: (C) 6 : 1

Step 1: Let volumes taken from A and B be VAV_A and VBV_B. Pure milk added is 0.2VB0.2V_B, giving total vat volume Vtotal=VA+1.2VBV_{\text{total}} = V_A + 1.2V_B.

Step 2: Track water volume: water fraction in A is 15\frac{1}{5}, in B is 35\frac{3}{5}, and pure milk contains no water.

Step 3: Total water in the vat is Wtotal=15VA+35VBW_{\text{total}} = \frac{1}{5}V_A + \frac{3}{5}V_B.

Step 4: The final ratio of milk to water is 3:13 : 1, so water constitutes 14\frac{1}{4} of the total volume: 15VA+35VBVA+1.2VB=14\frac{\frac{1}{5}V_A + \frac{3}{5}V_B}{V_A + 1.2V_B} = \frac{1}{4}.

Step 5: Cross-multiplying gives 0.8VA+2.4VB=VA+1.2VB  ⟹  1.2VB=0.2VA  ⟹  VAVB=610.8V_A + 2.4V_B = V_A + 1.2V_B \implies 1.2V_B = 0.2V_A \implies \frac{V_A}{V_B} = \frac{6}{1}.

Question 2 · CAT Level

A chemical laboratory stores 120 liters120\text{ liters} of an aqueous solution containing 20%20\% acid by volume. The solution is heated until a portion of the water evaporates, raising the acid concentration to 30%30\%. Subsequently, 2x liters2x\text{ liters} of pure acid and x litersx\text{ liters} of pure water are added to this concentrated solution, resulting in a final mixture with an acid concentration of 40%40\%. What was the total volume of pure acid (2x2x) added?

  1. A

    15 liters15\text{ liters}

  2. B

    20 liters20\text{ liters}

  3. C

    25 liters25\text{ liters}

  4. D

    30 liters30\text{ liters}

Show answer and explanation

Answer: (B) 20 liters

Step 1: Initial acid content is 0.20×120=24 liters0.20 \times 120 = 24\text{ liters}. Evaporation removes only water, keeping acid fixed at 24 liters24\text{ liters}.

Step 2: At 30%30\% acid, the volume after boiling is Vboiled=240.30=80 litersV_{\text{boiled}} = \frac{24}{0.30} = 80\text{ liters}.

Step 3: Adding 2x2x acid and xx water gives total volume 80+3x80 + 3x and total acid 24+2x24 + 2x.

Step 4: Equating final concentration: 24+2x80+3x=0.40=25  ⟹  5(24+2x)=2(80+3x)\frac{24 + 2x}{80 + 3x} = 0.40 = \frac{2}{5} \implies 5(24 + 2x) = 2(80 + 3x).

Step 5: This yields 120+10x=160+6x  ⟹  4x=40  ⟹  x=10 liters120 + 10x = 160 + 6x \implies 4x = 40 \implies x = 10\text{ liters}. The volume of pure acid added is 2x=20 liters2x = 20\text{ liters}.

Question 3 · CAT Level

Vessel A contains 40 liters40\text{ liters} of pure whole milk, and Vessel B contains 40 liters40\text{ liters} of pure water. A technician carries out two successive exchange cycles: in each cycle, 10 liters10\text{ liters} of liquid is transferred from Vessel A to Vessel B and thoroughly mixed, and then 10 liters10\text{ liters} of the resulting mixture is transferred from Vessel B back to Vessel A. What is the percentage concentration of milk in Vessel A after the completion of both cycles?

  1. A

    64%64\%

  2. B

    68%68\%

  3. C

    72%72\%

  4. D

    76%76\%

Show answer and explanation

Answer: (B) 68\%

Step 1: In Cycle 1, transferring 10 L10\text{ L} milk leaves 30 L30\text{ L} in A; B now has 10 L10\text{ L} milk in 50 L50\text{ L} (20%20\% milk).

Step 2: Returning 10 L10\text{ L} from B adds 10×0.20=2 L10 \times 0.20 = 2\text{ L} milk to A, leaving A with 32 L32\text{ L} milk (80%80\% milk) and B with 8 L8\text{ L} milk.

Step 3: In Cycle 2, transferring 10 L10\text{ L} from A to B transfers 10×0.80=8 L10 \times 0.80 = 8\text{ L} milk, leaving 24 L24\text{ L} milk in A; B now holds 8+8=16 L8 + 8 = 16\text{ L} milk in 50 L50\text{ L} (32%32\% milk).

Step 4: Returning 10 L10\text{ L} from B adds 10×0.32=3.2 L10 \times 0.32 = 3.2\text{ L} milk back into A, bringing milk in A to 24+3.2=27.2 liters24 + 3.2 = 27.2\text{ liters}.

Step 5: The final milk concentration in Vessel A is 27.240×100%=68%\frac{27.2}{40} \times 100\% = 68\%.

Question 4 · CAT Level

A storage vat contains a mixture of wine and water in the ratio 5:35 : 3. An operator drains 16 liters16\text{ liters} of the mixture and replaces it with 10 liters10\text{ liters} of pure water. If the resulting mixture in the vat contains wine and water in the ratio 1:11 : 1, what was the initial volume of the mixture in the vat?

  1. A

    48 liters48\text{ liters}

  2. B

    52 liters52\text{ liters}

  3. C

    56 liters56\text{ liters}

  4. D

    64 liters64\text{ liters}

Show answer and explanation

Answer: (C) 56 liters

Step 1: Let initial total volume be VV liters. Wine fraction is 58\frac{5}{8}, so initial wine volume is 58V\frac{5}{8}V.

Step 2: Draining 16 liters16\text{ liters} of mixture removes 58×16=10 liters\frac{5}{8} \times 16 = 10\text{ liters} of wine, leaving 58V−10\frac{5}{8}V - 10 liters of wine.

Step 3: Adding 10 liters10\text{ liters} of pure water changes the total volume to V−16+10=V−6V - 16 + 10 = V - 6, with wine volume unchanged.

Step 4: The new wine-to-water ratio is 1:11 : 1, so wine is half the new volume: 58V−10V−6=12\frac{\frac{5}{8}V - 10}{V - 6} = \frac{1}{2}.

Step 5: Cross-multiplying: 54V−20=V−6  ⟹  14V=14  ⟹  V=56 liters\frac{5}{4}V - 20 = V - 6 \implies \frac{1}{4}V = 14 \implies V = 56\text{ liters}.

Question 5 · CAT Level

A chemist blends solutions from three bottles containing 20%20\%, 35%35\%, and 60%60\% acid solutions to prepare exactly 60 liters60\text{ liters} of a 45%45\% acid solution. If the volume taken from the second bottle is twice the volume taken from the first bottle, how many liters of solution were taken from the third bottle?

  1. A

    24 liters24\text{ liters}

  2. B

    28 liters28\text{ liters}

  3. C

    30 liters30\text{ liters}

  4. D

    36 liters36\text{ liters}

Show answer and explanation

Answer: (C) 30 liters

Step 1: Let volumes from bottles 1, 2, and 3 be x,y,zx, y, z. Given y=2xy = 2x and x+y+z=60x + y + z = 60, we have 3x+z=60  ⟹  z=60−3x3x + z = 60 \implies z = 60 - 3x.

Step 2: The total acid required in the final mixture is 0.45×60=27 liters0.45 \times 60 = 27\text{ liters}.

Step 3: Express total solute: 0.20x+0.35(2x)+0.60(60−3x)=270.20x + 0.35(2x) + 0.60(60 - 3x) = 27.

Step 4: Expanding gives 0.20x+0.70x+36−1.80x=27  ⟹  36−0.90x=27  ⟹  0.90x=9  ⟹  x=10 liters0.20x + 0.70x + 36 - 1.80x = 27 \implies 36 - 0.90x = 27 \implies 0.90x = 9 \implies x = 10\text{ liters}.

Step 5: Thus, the volume taken from the third bottle is z=60−3(10)=30 litersz = 60 - 3(10) = 30\text{ liters}.

Try real CAT questions

Study this concept with interactive practice in PrepSoc.

Open the concept library