The Repeated Dilution & Replacement Formula
Deconstruct the exponential decay of repeated dilutions (Final/Initial = (1 - x/V)^n), back-calculate vessel volumes from final component ratios, and evaluate multi-stage siphoning cycles.
1. The Story & Mental Model: The Leaky Cask
Imagine an oak cask containing of pure aged single malt whisky. A dishonest cellar hand sneaks into the vault, siphons out of pure whisky, and refills the cask with of tap water.
On Night 1, the cellar hand stole of pure whisky. The cask now holds of whisky and of water ( purity).
On Night 2, the cellar hand returns and repeats the exact crime: he siphons out of the liquid and refills with water.
Did he steal another of pure whisky on Night 2?
No! He siphoned of a blend that was already water! He stole only of pure whisky ( of ). The pure whisky remaining is:
With every successive cycle, the thief steals less pure whisky because the cask is progressively diluted. This compounding decay follows the Exponential Dilution Law.
2. The CAT Question Blueprint: The Dilution Sequence
CAT and IPMAT test this concept in three distinct mathematical disguises:
-
The Forward Computation: Initial capacity , replacement volume , and operations are given; find remaining pure liquid.
-
The Final Component Ratio: Expressing the remaining pure liquid relative to the accumulated water.
-
The Reverse Capacity Extraction: The replacement volume , operation count , and the final ratio of are given; back-calculate the original cask capacity .
3. The Single Tactical Weapon: The Exponential Dilution Law
If a container of capacity initially holds pure liquid (or a solution of concentration ), and liters are withdrawn and replaced with pure water times successively:
Absolute Remaining Pure Liquid ():
Ratio of Pure Liquid to Added Water:
Reverse Extraction of Vessel Capacity ():
If the final ratio of Pure Liquid to Water is given as :
Varying Siphon Volumes ():
If the withdrawal amounts vary per cycle:
4. The Classic Exam Trap & Speed Shortcut
The Denominator Ratio Trap:
If the final ratio of wine to water is :
- Do NOT equate to !
- The denominator must be the TOTAL volume (Wine + Water):
Solved in two lines!
Formulas
| Exponential Dilution Formula | |
|---|---|
| Remaining Volume of Pure Liquid | |
| Capacity Extraction from Ratio | |
| Varying Multi-Stage Dilution |
Traps and tips
- Total parts in denominator: In ratio P : W, the fraction of pure liquid is P / (P + W), NEVER P / W.
- Recognize n-th powers: For n = 4, look for powers like 16/81 = (2/3)^4. For n = 3, look for 27/64 = (3/4)^3 or 8/27 = (2/3)^3.
- Varying replacements: When siphoning 10L, 20L, 25L from 100L, multiply (0.90) * (0.80) * (0.75) = 0.54 (54L remaining).
- Diluting existing solutions: If starting with a solution of concentration C0, final concentration is C0 * (1 - x/V)^n.
Solved examples
Example 4.5.1: Two-Stage Successive Dilution
A dairy storage container initially holds of pure whole milk. A worker siphons out of milk and replenishes the container with of water. The mixture is thoroughly blended, and the worker repeats the operation a second time (withdrawing of the mixture and adding of water). Determine the quantity of pure milk remaining in the container.
Show solution
Step 1: Identify dilution parameters.
-
Vessel capacity
-
Replacement volume
-
Number of operations
Step 2: Compute single-cycle retention fraction ().
Step 3: Apply the exponential dilution formula.
The container holds of pure milk.
Takeaway: Each cycle retains 9/10 of the pure liquid. After 2 cycles, remaining milk is 80 (9/10)^2 = 80 0.81 = 64.8 liters.
Example 4.5.2: Three-Stage Dilution with Clean Fractions
A chemical processing vat holds of pure laboratory solvent. An automated valve withdraws of the solvent and replaces it with pure water. This replacement procedure is executed a total of . Calculate: (a) the volume of pure solvent remaining, and (b) the volume of water in the vat.
Show solution
Step 1: Compute retention fraction.
Step 2: Apply formula for cycles.
Step 3: Compute water volume.
Takeaway: Retention fraction is 4/5. After 3 cycles, solvent remaining is 60 (4/5)^3 = 60 64/125 = 30.72 liters.
Example 4.5.3: Back-Calculating Cask Capacity from Final Ratio
From a cask completely filled with pure French wine, a dishonest server draws off and replaces it with water. He repeats this exact process (a total of ). The ratio of pure wine to water in the cask is now . Determine the original total capacity of the cask in liters.
Show solution
Step 1: Determine the fraction of pure wine in the total mixture.
-
Ratio of Wine to Water
-
Total volume parts
Step 2: Relate to the dilution formula for .
Step 3: Take the root on both sides.
Notice that and :
Step 4: Solve for capacity .
Given :
The original capacity of the cask was .
Takeaway: Total parts = 16 + 65 = 81. Taking the 4th root of 16/81 gives 2/3. Thus x/V = 1/3, meaning V = 3 8 = 24 liters.
Example 4.5.4: Varying Multi-Stage Withdrawal Volumes
A reservoir contains pure industrial acid. An operator executes three successive dilution stages with varying withdrawal volumes:
-
Stage 1: withdrawn and replaced with water.
-
Stage 2: of the mixture withdrawn and replaced with water.
-
Stage 3: of the mixture withdrawn and replaced with water.
Calculate the final volume of pure acid remaining in the reservoir.
Show solution
Step 1: Compute retention fractions for each stage.
-
Stage 1:
-
Stage 2:
-
Stage 3:
Step 2: Chain the multipliers together.
Step 3: Cancel and evaluate.
Step 4: Compute final acid volume.
The reservoir holds of pure acid.
Takeaway: With varying replacements, multiply individual retention factors: 0.90 0.80 0.75 = 0.54, leaving 54 liters of pure acid.
Example 4.5.5: Percentage-Based Siphoning Cycle
A container is completely filled with pure ethyl alcohol. Exactly of the liquid is drained and replaced with water. After thorough mixing, of the mixture is again drained and replaced with water. What percentage of the final mixture is water?
Show solution
Step 1: Formulate single-cycle alcohol retention fraction.
Draining means retaining of the alcohol:
Step 2: Compute alcohol percentage after cycles.
Step 3: Compute final water percentage.
Water constitutes of the final mixture.
Takeaway: Draining 20% twice retains (0.80)^2 = 64% pure alcohol, leaving 100% - 64% = 36% water in the container.
Example 4.5.6: Direct Solute Concentration Tracking
A carboy contains an aqueous solution with a spirit concentration. A technician draws off of the solution and replaces it with pure water, executing this cycle a total of . Determine the final percentage concentration of spirit in the carboy.
Show solution
Step 1: Compute retention fraction per cycle.
Step 2: Apply the concentration decay formula.
Given and :
The final spirit concentration is .
Takeaway: For an initial solution, multiply starting concentration by the retention factor squared: 40% (0.80)^2 = 40% 0.64 = 25.6%.
Practice questions
Question 1 · CAT Level
A storage vat initially holds of an alcohol solution containing alcohol and water in the ratio . A technician draws off of the solution and replaces it with pure water. This entire operation (drawing off and replacing with water) is repeated two more times (for a total of operations). What is the ratio of alcohol to water in the final mixture in the vat?
Show answer and explanation
Answer: (A) 27 : 53
Step 1: The initial alcohol volume is .
Step 2: In each withdrawal of from the vat, the retention factor is .
Step 3: After successive cycles, the remaining alcohol volume is .
Step 4: The total volume remains , so the remaining water volume is .
Step 5: The final ratio of alcohol to water in the vat is .
Question 2 · CAT Level
A container is completely filled with pure ethanol. First, of ethanol is siphoned off and replaced with pure water. Next, of the resulting mixture is siphoned off and replaced with pure water. If the final ratio of pure ethanol to water in the container is , what is the value of ?
Show answer and explanation
Answer: (B) 10 liters
Step 1: Initial ethanol is . The successive retention factors are and .
Step 2: The final ratio of ethanol to water is , so the final ethanol volume is .
Step 3: Setting up the product: .
Step 4: Expanding gives .
Step 5: Since , the extraneous root is rejected, leaving .
Question 3 · CAT Level
A laboratory carboy initially holds of pure concentrated nitric acid. In each dilution cycle, of liquid is withdrawn from the carboy and replaced with pure distilled water. What is the minimum number of such cycles required for the concentration of acid in the carboy to fall strictly below ?
Show answer and explanation
Answer: (C) 6
Step 1: The retention factor per cycle is .
Step 2: After cycles, the remaining acid concentration is . We require .
Step 3: Calculating successive powers: , , , .
Step 4: Continuing: (), and ().
Step 5: Hence, the minimum number of cycles required to drop strictly below is .
Question 4 · CAT Level
A container initially holds of pure milk. In Stage 1, of milk is drawn off and replaced with pure water. In Stage 2, of the mixture is drawn off and replaced with pure water. In Stage 3, of the mixture is drawn off and replaced with pure fruit syrup. What is the volume of pure water remaining in the container at the end of Stage 3?
Show answer and explanation
Answer: (B) 16 liters
Step 1: After Stage 1, the container has milk and water.
Step 2: In Stage 2, withdrawing leaves a retention factor of , so remaining water from Stage 1 is .
Step 3: Replenishing with water gives a total of water before Stage 3.
Step 4: In Stage 3, withdrawing leaves a retention factor of , with no water added (pure syrup is added instead).
Step 5: The final water remaining is .
Question 5 · CAT Level
From a cask completely filled with pure wine, of liquid is drawn and replaced with water. This replacement procedure is executed a total of times. At the end of the fourth operation, the ratio of the volume of wine remaining in the cask to the volume of water in the cask is . What was the original capacity of the cask?
Show answer and explanation
Answer: (C) 27 liters
Step 1: After dilution cycles of withdrawing from capacity , the fraction of wine remaining is .
Step 2: The final wine-to-water ratio is , so wine represents of the total capacity.
Step 3: Equating fractions gives .
Step 4: Taking the fourth root of both sides yields .
Step 5: Solving for gives .
Try real CAT questions
Study this concept with interactive practice in PrepSoc.
Open the concept library