CAT 2021 Slot 3 DILR Q17

  • Data Interpretation and Logical Reasoning
  • Logical Reasoning › Math Puzzles
  • Hard
  • Multiple choice
  • CAT_2021_SLOT3_DILR_Q17

Data set · questions 17–20

Each of the bottles mentioned in this question contains 50 ml of liquid. The liquid in any bottle can be 100% pure content (P) or can have certain amount of impurity (I). Visually it is not possible to distinguish between P and I. There is a testing device which detects impurity, as long as the percentage of impurity in the content tested is 10% or more.

For example, suppose bottle 1 contains only P, and bottle 2 contains 80% P and 20% I. If content from bottle 1 is tested, it will be found out that it contains only P. If content of bottle 2is tested, the test will reveal that it contains some amount of I. If 10 ml of content from bottle 1is mixed with 20 ml content from bottle 2, the test will show that the mixture has impurity, and hence we can conclude that at least one of the two bottles has I. However, if 10 ml of content from bottle 1 is mixed with 5 ml of content from bottle 2. the test will not detect any impurity in the resultant mixture.

Question 17

5 ml of content from bottle A is mixed with 5 ml of content from bottle B. The resultant mixture, when tested, detects the presence of I. If it is known that bottle A contains only P, what BEST can be concluded about the volume of I in bottle B?

  1. A

    10 ml or more

    Answer A in PrepSoc practice
  2. B

    Less than 1 ml

    Answer B in PrepSoc practice
  3. C

    1 ml

    Answer C in PrepSoc practice
  4. D

    10 ml

    Answer D in PrepSoc practice

Answer this questionOr tap an option. Opens in practice mode, free, no sign-in.

Show answer and solution

Answer: (A)

10 ml or more

Solution

Concept: Mixture Concentration, Detection Thresholds & Group Testing Logic

Master State Table

Parameter / RulePassage InvariantMathematical ExpressionAnalytical Implication
Bottle CapacityUniform 50 ml per bottleVbottle=50 mlV_{\text{bottle}} = 50\text{ ml}Total liquid in each full bottle is 50 ml
CompositionPure liquid (PP) and Impurity (II)VP+VI=50 mlV_P + V_I = 50\text{ ml} (VI≥0V_I \ge 0)Homogeneous; sample retains parent concentration
ConcentrationProportion of II in bottle kkck=VI,k50×100%c_k = \frac{V_{I, k}}{50} \times 100\%ck∈[0%,100%]c_k \in [0\%, 100\%]; Pure bottle has ck=0%c_k = 0\%
Mixture RulePooled sample volumes vkv_kCmix=∑vkck∑vkC_{\text{mix}} = \frac{\sum v_k c_k}{\sum v_k}Weighted average concentration of mixture
Positive TestDevice detects impurityCmix≥10%C_{\text{mix}} \ge 10\%Confirms presence of II in tested sample
Negative TestDevice detects no impurityCmix<10%C_{\text{mix}} < 10\%Impurity absent (0%0\%) or diluted below 10%10\%

Question Deduction

• Sample Composition and Detection Threshold:

• Volume from bottle A: vA=5 mlv_A = 5\text{ ml}; volume from bottle B: vB=5 mlv_B = 5\text{ ml}.

• Total mixture volume: Vmix=5+5=10 mlV_{\text{mix}} = 5 + 5 = 10\text{ ml}.

• The testing device triggers if and only if impurity concentration is at least 10%10\%.

• Because impurity was detected, the mixture satisfies:

$$C_{\text{mix}} \ge 10\%$$

• Tracing Impurity Origin to Bottle B:

• Bottle A contains only PP (cA=0%c_A = 0\%), contributing 0 ml0\text{ ml} of impurity.

• All impurity in the mixture originated entirely from bottle B's 5 ml sample.

• Minimum volume of impurity in the mixture:

$$I_{\text{mix}} = C_{\text{mix}} \times V_{\text{mix}} \ge 10\% \times 10\text{ ml} = 1\text{ ml}$$

• The 5 ml drawn from bottle B contains at least 1 ml of impurity (IB≥1 mlI_B \ge 1\text{ ml}).

• By homogeneity, bottle B's impurity concentration satisfies:

$$c_B = \frac{I_B}{v_B} \ge \frac{1\text{ ml}}{5\text{ ml}} = 20\%$$

• Extrapolating to Full Bottle Volume:

• Across bottle B's total volume of 50 ml, the volume of impurity (VI,BV_{I, B}) is:

$$V_{I, B} = c_B \times 50\text{ ml} \ge 20\% \times 50\text{ ml} = 10\text{ ml}$$

• Bottle B contains 10 ml or more of impurity (concentrations above 20%20\% also trigger detection).

• Option Matching:

• Matches Option 1 (10 ml or more).

Topper Take

• Threshold requires ≥1 ml\ge 1\text{ ml} of II in 10 ml mix. Bottle A has 0 ml, so B supplies ≥1 ml\ge 1\text{ ml} in 5 ml (cB≥20%c_B \ge 20\%).

• Scaling across B's 50 ml volume gives ≥10 ml\ge 10\text{ ml} of impurity. Directly confirms Option 1.

Other questions in this set

  1. Q18. There are four bottles. Each bottle is known to contain only P or only I. They will be considered to be “collectively…
  2. Q19. There are four bottles. It is known that three of these bottles contain only P, while the remaining one contains 80% P…
  3. Q20. There are four bottles. It is known that either one or two of these bottles contain(s)only P, while the remaining ones…

Math Puzzles questions from other CAT papers

  1. CAT 2025 Slot 1 DILR Q9
    What was the occupancy factor for segment D – E?
  2. CAT 2025 Slot 1 DILR Q10
    How many tickets were booked from Station A to Station E?
  3. CAT 2025 Slot 1 DILR Q11
    How many tickets were booked from Station C?
  4. CAT 2025 Slot 1 DILR Q12
    What is the difference between the number of tickets booked to Station C and the number of tickets booked to…
  5. CAT 2025 Slot 1 DILR Q13
    How many tickets were booked to travel in exactly one segment?

Practise this question with timing, notes and your mistake notebook.

Practise in PrepSoc