Practice Set 2: Advanced & CAT Exam-Level Drill
Rigorous 25-question advanced drill mirroring Chapter 6 Exercise 2 with multi-variable constraints and authentic CAT-level traps.
Practice Set 2: Advanced & CAT Exam-Level Drill
This advanced set tests multi-step problems, subtle algebraic traps, and non-trivial speed shortcuts for Time, Speed & Distance. Solve without looking at hints for full exam simulation.
Traps and tips
- Watch out for multi-entity dependent chains where variables depend on intermediate quantities.
- Check for boundary cases and integer constraints before picking options.
- Leverage standard speed shortcuts to eliminate distractor options within 30 seconds.
Practice questions
Question 1 · CAT Level
An aerospace planetary lander pod descends vertically toward the surface of an exoplanet where local gravitational acceleration is . The lander drops freely from rest for seconds, covering a vertical descent of meters. At seconds, its automated guidance system activates a retrorocket cruise mode that maintains a constant descent velocity of for the subsequent seconds, traversing an additional distance of meters. If the lander completes a total vertical descent of across a total flight duration of , after how many seconds from release was the retrorocket cruise mode activated?
Show answer and explanation
Answer: (B) 7 seconds
The problem combines an accelerated motion stage with a constant velocity stage. Because the constant cruise velocity matches the coefficient of the quadratic free-fall distance , the sum of the distances simplifies algebraically to . Recognizing this factorization bypasses the need to set up quadratic equations or solve for separately. Substituting the known total time seconds and total distance meters yields , giving seconds. The other options serve as distractors: 5 seconds arises from assuming equal time split or miscalculating , 8 seconds is a common arithmetic slip dividing by 140, and 10 seconds assumes linear average velocity over the entire interval.
Question 2 · CAT Level
An autonomous electric transport pod cruising at an expressway speed of consumes more battery energy to travel a given distance than it does when cruising at an eco-speed of . If the pod can travel on of electrical energy at , how far can the pod travel on a usable battery charge of at the expressway speed of ?
Show answer and explanation
Answer: (B) 275 km
When energy consumption per kilometer increases by 40%, the fuel consumed per kilometer scales by a factor of 1.4. Consequently, the mileage or energy efficiency (km per unit energy) scales inversely by dividing by 1.4. At 65 km/h, the pod travels 7.0 km per kWh. At 95 km/h, covering 7.0 km requires 1.4 kWh, reducing efficiency to exactly 5.0 km/kWh. Multiplying 5.0 km/kWh by the available 55 kWh gives 275 km. The distractor 385 km represents the unadjusted distance at eco-speed (). The distractor 308 km results from incorrectly dividing 385 by 1.25 instead of 1.4. The distractor 250 km comes from an erroneous 40% reduction applied directly to distance ( or rounding).
Question 3 · CAT Level
A logistics supervisor at Terminal North () must dispatch a rapid maintenance convoy to Transit Hub East () to receive an automated freight train arriving from Terminal South (). Terminal South is situated directly south of Terminal North. The transit corridors and form angles of and , respectively, with the north-south axis . The automated freight train departs Terminal South at 06:30 a.m. and travels along corridor at a uniform speed of , while the maintenance convoy travels along corridor at a constant speed of . If the convoy must reach Transit Hub East at least prior to the arrival of the freight train, what is the latest time the convoy can depart from Terminal North?
Show answer and explanation
Answer: (B) 04:10 a.m.
The key insight is identifying that the angles and sum to , making a classic 30-60-90 right-angled triangle with the north-south axis as the hypotenuse. The distance from South to East is km, and at km/h, the freight train takes exactly 4 hours to arrive at 10:30 a.m. Factoring in the 20-minute safety buffer requires the convoy to reach Hub East by 10:10 a.m. The distance from North to East is km, which at 50 km/h requires 6 hours of travel time. Working backward, 10:10 a.m. minus 6 hours gives 04:10 a.m. The distractor 04:30 a.m. omits the 20-minute buffer, 03:50 a.m. mistakenly doubles the buffer, and 04:50 a.m. inadvertently adds the buffer instead of subtracting it.
Question 4 · CAT Level
Two regional express freight trains, and , operate along a single straight rail corridor connecting Terminal Alpha and Terminal Beta. Train departs Terminal Beta heading for Terminal Alpha at 08:00 a.m. at a constant speed of . Train departs Terminal Alpha heading for Terminal Beta at 09:00 a.m. at a constant speed of . At what time will the two trains be separated by exactly for the first time?
Show answer and explanation
Answer: (B) 09:48 a.m.
Because the trains depart at different times, we first equalize the reference timeline to 09:00 a.m. During the one-hour head start from 08:00 a.m. to 09:00 a.m., Train covers 100 km, shrinking the 280-km corridor to 180 km. Once both trains are moving toward each other, their relative speed of convergence is km/h. To be separated by 36 km for the first time (before crossing), they must cover km of their separating gap. Dividing 144 km by 180 km/h yields 4/5 of an hour, or exactly 48 minutes past 09:00 a.m., arriving at 09:48 a.m. The distractor 10:00 a.m. marks the moment of crossing (covering the full 180 km), 10:12 a.m. represents the second time they are 36 km apart (after crossing and moving away), and 09:36 a.m. is an intuitive trap confusing 36 km with 36 minutes.
Question 5 · CAT Level
Two heavy-payload autonomous freight haulers, and , are scheduled on a dedicated interstate freight corridor connecting Terminal Alpha and Terminal Beta. Hauler departs Terminal Alpha for Terminal Beta at 08:00 a.m. and reaches Terminal Beta at 04:00 p.m. on the same day. Simultaneously, Hauler departs Terminal Beta for Terminal Alpha at 08:00 a.m. and arrives at Terminal Alpha at 08:00 p.m. on the same day. Assuming both haulers travel at uniform speeds along the identical corridor, at what exact time do the two haulers cross each other?
Show answer and explanation
Answer: (C) 12:48 p.m.
When two objects start simultaneously from opposite ends of a route and travel toward each other at uniform speeds, the time required to meet depends solely on their individual transit times and and is completely independent of the actual numerical distance. The rate at which the separating gap is closed per hour is of the total distance. The total time to meet is the reciprocal, hours, which equals 4 hours and 48 minutes. Adding 4 hours 48 minutes to the 08:00 a.m. departure time yields 12:48 p.m. The distractor 01:00 p.m. is the arithmetic average of their transit times ( hours, halfway at 5 hours), which fails because relative speed is harmonic, not arithmetic. The distractor 12:00 noon represents the midpoint of Hauler 1's journey alone (4 hours), and 12:36 p.m. results from miscalculating as 4.6 hours.
Question 6 · CAT Level
Three autonomous surveillance drones—Aero-1, Aero-2, and Aero-3—are dispatched in succession from Coastal Base Alpha along a linear security corridor towards Outpost Omega. Aero-1 departs at 07:00 a.m. maintaining a constant cruising speed of . Aero-2 departs from Base Alpha along the identical route at 09:30 a.m. at a constant speed of . Later that morning, Aero-3 departs from Base Alpha at a constant speed of . If Aero-2 and Aero-3 overtake Aero-1 at the exact same geographical checkpoint simultaneously, at what time did Aero-3 depart from Coastal Base Alpha?
Show answer and explanation
Answer: (C) 10:45 a.m.
The problem revolves around finding the unique space-time coordinates (D, T) where Aero-2 intercepts Aero-1, and then working backwards to find the launch time for Aero-3. Aero-1 travels for 2.5 hours before Aero-2 starts, establishing an initial lead of 150 km. With a relative closing speed of 90 - 60 = 30 km/h, Aero-2 requires exactly 150 / 30 = 5 hours to neutralize the gap. Thus, the interception takes place at 09:30 a.m. + 5 hours = 2:30 p.m. (14:30) at a distance of 90 × 5 = 450 km from the origin. For Aero-3 to reach this exact checkpoint at the identical instant while cruising at 120 km/h, it requires 450 / 120 = 3.75 hours (3 hours 45 minutes). Subtracting 3 hours 45 minutes from 2:30 p.m. yields 10:45 a.m. Distractor 10:30 a.m. arises if one incorrectly calculates the flight time as 4 hours (480 / 120) or misapplies the relative speed. Distractor 11:00 a.m. results from erroneously subtracting 3.5 hours, and 10:15 a.m. comes from miscalculating the lead distance as 180 km.
Question 7 · CAT Level
Two automated high-speed express capsules, Hyperion and Boreas, depart simultaneously from Terminal X and Terminal Y along a dedicated bidirectional transit corridor, traveling towards Terminal Y and Terminal X, respectively. Upon rendezvous at an intermediate signaling point, they exchange their propulsion profiles such that Hyperion proceeds towards Terminal Y at the initial cruising speed of Boreas, while Boreas proceeds towards Terminal X at the initial cruising speed of Hyperion. If Capsule Hyperion required a total transit duration of to travel from Terminal X to Terminal Y, what was the total transit duration taken by Capsule Boreas to complete its journey from Terminal Y to Terminal X?
Show answer and explanation
Answer: (C) 210 minutes
This classic CAT symmetry problem highlights how algebraic cancellations create an invariant result. Before meeting at point M, both capsules travel for the exact same duration t_m. Hyperion covers a distance of s_H × t_m, and Boreas covers s_B × t_m. After exchanging speeds at M, Hyperion travels Boreas's pre-meeting distance (s_B × t_m) at Boreas's speed s_B, which takes exactly (s_B × t_m) / s_B = t_m. Consequently, Hyperion's total journey time is t_m + t_m = 2t_m = 210 minutes, meaning the rendezvous took place at exactly 105 minutes. By identical logic, Boreas travels Hyperion's pre-meeting distance (s_H × t_m) at Hyperion's speed s_H, which takes (s_H × t_m) / s_H = t_m, yielding a total time of 2t_m = 210 minutes. Distractor 'Cannot be determined' is a common trap for test-takers who believe the absence of numerical speeds prevents finding the answer. Distractor 105 minutes traps students who confuse the half-journey time (time to meeting) with the total journey time. Distractor 140 minutes is an arbitrary harmonic mean trap.
Question 8 · CAT Level
Two automated inspection rovers, Rover Sentinel and Rover Scout, are stationed at opposite ends of a straight, enclosed factory conduit of length , designated as Station North and Station South. At the same moment, Sentinel departs from Station North towards Station South, and Scout departs from Station South towards Station North. Whenever either rover reaches a terminal station, it instantly reverses direction without losing speed and continues oscillating back and forth along the conduit indefinitely. Both rovers maintain uniform speeds, and the ratio of Sentinel's speed to Scout's speed is . What is the total cumulative distance traveled by Rover Sentinel at the exact instant both rovers cross paths for the time?
Show answer and explanation
Answer: (C) 6300 meters
In a closed linear corridor with oscillating reflections, two entities starting from opposite ends cover a combined distance equal to the corridor length D for their first meeting. For every subsequent meeting, each traveler must reach the opposite boundary, reverse, and cross each other again, requiring a combined distance of 2D between consecutive encounters. Thus, for the nth meeting, the total combined distance traversed by both bodies is D + (n - 1) × 2D = (2n - 1)D. For the 4th meeting (n = 4), the combined distance is (2(4) - 1) × 1500 = 7 × 1500 = 10500 m. Since both rovers operate over the identical time duration, the distance covered divides in direct proportion to their speeds (3 : 2). Sentinel covers 3/5 of 10500 m, which is 6300 m. Option 4200 m is the distance covered by Rover Scout (2/5 of 10500 m). Option 5400 m represents only the distance covered during the 3 subsequent intervals (3 × 1800 m), mistakenly omitting the initial 900 m. Option 7200 m assumes Sentinel covers 1800 m in all 4 segments (4 × 1800 m), incorrectly doubling the first segment.
Question 9 · CAT Level
A heavy-duty autonomous electric freight hauler is dispatched along a expressway from Logistics Hub A to Logistics Hub B at a standard scheduled cruising speed. After covering a certain distance, an onboard battery thermal fault forces the vehicle to reduce its cruising speed to of its standard speed for the remainder of the journey, causing it to arrive at Hub B exactly behind schedule. Diagnostic logs reveal that had the fault occurred earlier along the route, the hauler would have arrived at Hub B an additional later. What was the distance traveled by the hauler before the fault developed, and what was its standard scheduled cruising speed?
Show answer and explanation
Answer: (A) 80 km, 80 km/h
The most effective method to solve speed degradation problems is isolating the differential interval. Moving the point of failure 60 km earlier only changes the travel time over that 60 km segment—all other parts of the route remain unchanged. At 3/4 speed, travel time scales by 4/3, introducing a delay equal to (4/3 - 1) = 1/3 of the standard time. Since the extra delay for this 60 km is 15 minutes (1/4 hour), we have (1/3) × (60 / s) = 1/4, which immediately yields s = 80 km/h. Next, knowing the total delay across the degraded distance (320 - x) is 60 minutes (1 hour), we set (1/3) × (320 - x) / 80 = 1, giving 320 - x = 240 km, which means x = 80 km. Option '60 km, 80 km/h' traps students who confuse the 60 km shift with the initial distance x. Option '80 km, 60 km/h' swaps the standard speed with the degraded speed (3/4 of 80 = 60 km/h). Option '100 km, 60 km/h' results from miscalculating the time fractions.
Question 10 · CAT Level
A mobile seismic monitoring unit is positioned at the perimeter of an open-pit excavation zone when a controlled dynamite blasting sequence begins. The instant the sound of the first blast reaches the unit, the vehicle begins driving directly away from the blast site along a straight access road at a constant cruising speed. Exactly after the first blast detonated at the site, a second blast is detonated at the identical location. The vehicle's acoustic sensors detect the sound of the second blast exactly after detecting the first blast. Assuming sound travels through the ambient air at a constant speed of , how far was the vehicle from the blast site at the instant it detected the second blast?
Show answer and explanation
Answer: (B) 8500 meters
This question highlights a classic relative transit principle. The second blast is triggered at the site at t = 20 minutes (1200 seconds). The driver hears it at t = 20 minutes 25 seconds (1225 seconds). This means the acoustic pulse traveled from the fixed blast site to the driver's exact position in 1225 - 1200 = 25 seconds. Since sound propagates at 340 m/s, the distance from the blast site to the vehicle at the moment of hearing is simply 340 m/s × 25 s = 8500 meters. Test-takers often get trapped attempting to calculate the vehicle's speed and setting up coupled algebraic distance equations, which can lead to arithmetic errors. Distractor 6800 m results from using 20 seconds instead of 25 seconds (340 × 20). Distractor 10200 m comes from using 30 seconds (340 × 30). Distractor 17000 m results from accidentally doubling the delay to 50 seconds.
Question 11 · CAT Level
Two commercial aerospace hubs, Port Zephyr (located in time zone Zone-W) and Port Boreas (located in time zone Zone-E), are separated by a trans-meridian aerial corridor of distance , with Port Zephyr located due west of Port Boreas. A steady atmospheric jet stream blows from east to west (from Port Boreas directly toward Port Zephyr) at a uniform speed of . A commercial carrier operates regular non-stop flights between the two hubs using aircraft that cruise at an identical constant airspeed in still air in both directions. The airline publishes the following local flight schedule for the same calendar day:
Flight Z-101 departs Port Boreas at 2:00 p.m. and arrives at Port Zephyr at 7:00 p.m. local time.
Flight Z-102 departs Port Zephyr at 4:00 a.m. and arrives at Port Boreas at 5:00 p.m. local time.
Based on this schedule, what is the local time difference between Port Boreas and Port Zephyr?
Show answer and explanation
Answer: (C) 3 hours
To determine the true duration of each flight, the departure and arrival times must be compared in the same local time reference. Since Port Boreas lies east of Port Zephyr, its local clock is ahead by an offset . For the eastbound flight against the wind, apparent time is , making actual flight time . For the westbound flight with the wind, apparent time is , making actual flight time . Summing the two true flight durations completely cancels the time zone offset , giving a combined travel duration of . Using the round-trip wind formula yields a cruising speed of . The tailwind leg thus takes , and equating confirms the time difference is exactly .
Question 12 · CAT Level
Two commercial aerospace hubs, Port Zephyr (located in time zone Zone-W) and Port Boreas (located in time zone Zone-E), are separated by a trans-meridian aerial corridor of distance , with Port Zephyr located due west of Port Boreas. A steady atmospheric jet stream blows from east to west (from Port Boreas directly toward Port Zephyr) at a uniform speed of . A commercial carrier operates regular non-stop flights between the two hubs using aircraft that cruise at an identical constant airspeed in still air in both directions. The airline publishes the following local flight schedule for the same calendar day:
Flight Z-101 departs Port Boreas at 2:00 p.m. and arrives at Port Zephyr at 7:00 p.m. local time.
Flight Z-102 departs Port Zephyr at 4:00 a.m. and arrives at Port Boreas at 5:00 p.m. local time.
What is the cruising airspeed of each aircraft in still air?
Show answer and explanation
Answer: (C) 540 km/h
Because local time advances by when flying east and regresses by when flying west, the sum of the apparent travel times for both legs identically equals the sum of the actual flight durations: . Since distance is and the jet stream velocity is , the flight durations are and . Setting their sum to 18 yields , which simplifies to the quadratic . Factoring gives , confirming the cruising airspeed is . The options and represent the net headwind and tailwind ground speeds, respectively.
Question 13 · CAT Level
Patrol Vessel Alpha departs coastal Station North heading toward coastal Station South along a straight maritime shipping channel at 8:00 a.m. with a uniform speed of . At 9:00 a.m., Vessel Alpha docks at an offshore checkpoint for to conduct mandatory cargo clearance, after which it immediately resumes its voyage toward Station South at its original speed. Meanwhile, Patrol Vessel Beta departs Station South heading toward Station North at 10:00 a.m., cruising non-stop at a constant speed of . At what time will the two patrol vessels cross each other?
Show answer and explanation
Answer: (C) 11:40 a.m.
To solve this meeting problem, synchronize the timeline to 10:00 a.m. when both vessels are simultaneously underway. Between 8:00 a.m. and 10:00 a.m., Vessel Alpha is underway for 2 hours minus the 24-minute () stoppage, which equals of active cruising. During this time, Alpha covers , leaving between the vessels at 10:00 a.m. Traveling toward each other at a combined relative speed of , they require (1 hour and 40 minutes) to meet. Adding 1 hour 40 minutes to 10:00 a.m. gives 11:40 a.m. Neglecting the 24-minute stop leads to the classic distractor 11:30 a.m.
Question 14 · CAT Level
An autonomous hydrographic survey drone completes a round-trip mission between river monitoring Station X and downstream Station Y, returning to Station X in a total running time of . During launch at Station X, an unpowered telemetry beacon accidentally detaches and drifts freely with the river current, taking to reach Station Y. What is the ratio of the speed of the survey drone in still water to the speed of the river current?
Show answer and explanation
Answer: (B) 3 : 1
A freely floating, unpowered object moves entirely at the speed of the river current , so the distance between Station X and Station Y is . The drone's total round-trip time is the sum of its downstream time and upstream time , which simplifies to . Substituting into this equation gives , which cross-multiplies to . Dividing by produces the quadratic , which factors neatly into . Since speed must be positive, , meaning the still-water speed is 3 times the stream speed, or a ratio of .
Question 15 · CAT Level
Two supersonic surveillance drones, Drone Falcon and Drone Hawk, are flying toward a common ground radar checkpoint along two straight paths that intersect perpendicularly at . Both drones fly at the same constant speed. Drone Falcon initiates its approach from a launch point from , while Drone Hawk initiates its approach from a launch point from . Both drones launch at the exact same moment. Exactly after launch, radar tracking records that the direct line-of-sight distance between the two drones is . Given that neither drone has yet reached checkpoint during this first minute, what is the cruising speed of each drone?
Show answer and explanation
Answer: (B) 9 km/min
Because the drones fly along perpendicular paths toward the intersection , their positions after 1 minute form the legs of a right-angled triangle with the direct distance between them being the hypotenuse. Traveling at , the drones are at distances and from . By the Pythagorean theorem, . Expanding and simplifying yields , which factors into . Since the drones have not yet passed checkpoint , , selecting . At , the distances to are and , perfectly forming the classic Pythagorean triple.
Question 16 · CAT Level
An autonomous highway interceptor cruiser patrolling eastbound along an interstate corridor spots an unauthorized transport vehicle traveling westbound in the opposing lane at a constant speed of . The interceptor is cruising at a uniform speed of . Due to the concrete median divider, the interceptor must continue eastbound for another before reaching an emergency crossover to execute a U-turn and begin pursuit of the westbound target. Assuming both vehicles maintain their constant speeds throughout and the time taken to execute the U-turn is negligible, how many minutes after initially spotting the target does the interceptor catch up with it?
Show answer and explanation
Answer: (B) 36 minutes
During the initial 6 minutes (), the cruiser and the target travel in opposite directions at 120 km/h and 80 km/h, creating a total separation of . After executing the U-turn, the cruiser pursues the target in the same direction with a relative overtaking speed of . The time taken to close the 20 km gap is , or 30 minutes. Therefore, the total elapsed time from the moment the target was spotted is .
Question 17 · CAT Level
A cheetah spots a Thomson's gazelle ahead on an open savanna plain and immediately initiates a high-speed pursuit. During the chase, the gazelle takes 6 leaps in the exact time the cheetah takes 5 leaps. However, each leap of the cheetah covers , whereas each leap of the gazelle covers . How many leaps must the cheetah take from the start of the pursuit to successfully catch up with the gazelle?
Show answer and explanation
Answer: (C) 60 leaps
In the time the cheetah takes 5 leaps, it covers . In the same time, the gazelle takes 6 leaps, covering . Thus, the cheetah gains relative to the gazelle for every 5 leaps it takes. To close the initial 36-meter gap, the cheetah requires such cycles. Consequently, the total number of leaps taken by the cheetah is .
Question 18 · CAT Level
An autonomous exploration rover is trapped at the bottom of a steep geothermal fissure that is deep. The rover climbs according to an arithmetic schedule powered by solar irradiation: on Sol 1, it climbs during the daylight hours; on Sol 2, it climbs during daylight; on Sol 3, it climbs during daylight, and so on, climbing during the daylight phase of the -th Sol. However, during the sub-zero night of each Sol, mechanical shrinkage and shifting scree cause it to slide back down by exactly half the distance it climbed during that Sol's daylight phase. On which Sol will the rover successfully reach the rim and climb out of the fissure?
Show answer and explanation
Answer: (C) 13th Sol
On each Sol , the net elevation gained after both daylight climb and nighttime slide is . By the end of Sol 12, the net elevation achieved is . On Sol 13, the rover climbs 13 meters during the day, reaching an elevation of . Because 52 meters exceeds the 50-meter depth of the fissure, the rover reaches the rim and escapes during the daytime of Sol 13, before any nightly slide can occur.
Question 19 · CAT Level
Two high-speed passenger express trains, the Solar Express and the Lunar Express, operate along a single dedicated regional rail corridor connecting Terminal Alpha and Terminal Beta. The Solar Express completes the nonstop journey from Terminal Alpha to Terminal Beta in 5 hours, while the Lunar Express completes the nonstop journey from Terminal Beta to Terminal Alpha in 7 hours. If both trains depart simultaneously from their respective starting terminals at 08:00 a.m. and travel at their respective uniform speeds, at what time will they cross each other along the corridor?
Show answer and explanation
Answer: (C) 10:55 a.m.
Let the distance between the two terminals be . The speed of the Solar Express is and that of the Lunar Express is . When traveling towards each other, their combined relative speed is . The time required for them to meet is . Since both departed at 08:00 a.m., they cross each other at
Question 20 · CAT Level
Two autonomous pipeline inspection rovers, Alpha and Beta, depart simultaneously from opposite terminals P and Q of a straight trans-continental pipeline of length , traveling towards each other at constant uniform speeds. Rover Alpha starts from terminal P heading towards Q, while Rover Beta starts from terminal Q heading towards P. Upon arriving at their respective opposite terminals, each rover instantaneously reverses direction without stopping and heads back towards its original starting terminal at the same uniform speed. The two rovers pass each other for the first time at a distance of from terminal P, and on their return journey, they pass each other for the second time at a distance of from terminal Q. What is the total length of the pipeline expressed in terms of and ?
Show answer and explanation
Answer: (B) 3d 1 - d 2
When two objects move back and forth along a linear track of length , together they cover a combined distance of to reach their first meeting. Between the first and second meetings, each traveler reaches an end and returns, so together they cover an additional , making the total combined distance at the second meeting equal to . Because both move at constant speeds, any individual traveler covers 3 times the distance covered in the first stage. Rover Alpha covered initially, so by the second meeting it has traveled . Physically, Rover Alpha has traversed the entire length to terminal Q and turned back by , giving total distance . Equating the two yields , so .
Question 21 · CAT Level
An automated electric freight hauler is scheduled to travel a total distance of along a dedicated logistics corridor at a uniform cruising speed. After completing a certain distance, a sensor throttling malfunction restricts its cruising speed to of its normal operating speed for the remainder of the trip, causing it to reach the destination late. Had the throttling malfunction occurred further along the corridor, the hauler would have arrived earlier than it did. What was the distance travelled by the freight hauler at its normal operating speed before the malfunction occurred?
Show answer and explanation
Answer: (B) 360 km
Over the 60 km displacement between the two potential breakdown points, the freight hauler saves 15 minutes by travelling at its full speed rather than 2/3 speed. This establishes that every kilometre travelled under throttled conditions accumulates 15/60 = 0.25 minutes of delay. To accumulate the full 50 minutes of arrival delay, the hauler must have travelled 50 / 0.25 = 200 km at reduced speed. Subtracting this 200 km defective stretch from the total corridor distance of 560 km leaves 360 km traversed at normal operating speed.
Question 22 · CAT Level
Two autonomous rapid-transit pods, Pod Alpha and Pod Beta, depart simultaneously from Terminus A and Terminus B, travelling toward Terminus B and Terminus A respectively along parallel guideways at constant cruising speeds. Upon crossing each other en route, Pod Alpha takes to reach Terminus B, while Pod Beta takes to reach Terminus A. How much time elapsed from their simultaneous departure until the two pods crossed each other?
Show answer and explanation
Answer: (B) 5 hours
Question 23 · CAT Level
An automated commercial transport hauler completes a four-stage test run across varied logistics zones. It covers the first at a steady speed of , the second stretch of at , and the third stretch of at . The hauler then completes the fourth and final stretch of the test run in exactly . If the average speed of the hauler across the entire journey was , what was the distance covered in the final stretch?
Show answer and explanation
Answer: (C) 88 km
The duration of the first three legs is 80/50 = 1.6 hours, 60/40 = 1.5 hours, and 90/75 = 1.2 hours, which sum to 4.3 hours. Including the final 1-hour stage gives a total journey duration of 5.3 hours. Multiplying this total time by the overall average speed of 60 km/h yields an aggregate journey distance of 318 km. Subtracting the first three segment distances (80 + 60 + 90 = 230 km) leaves 318 - 230 = 88 km for the final stretch.
Question 24 · CAT Level
Two autonomous pipeline inspection rovers, Rover X and Rover Y, set out simultaneously from Station A and Station B respectively, travelling toward each other along a straight single-track corridor at constant cruising speeds. Upon reaching the opposing station, each rover immediately reverses direction without stopping and heads back toward its starting station at its original speed. The two rovers meet for the first time at a point from Station B. Continuing their journeys and reversing at the terminals, they meet for the second time at a point from Station A. What is the total corridor distance between Station A and Station B?
Show answer and explanation
Answer: (C) 90 km
In double-meeting turnaround problems, the combined distance covered by both bodies is D at the first meeting and 3D at the second meeting. Since both rovers maintain uniform speeds, each covers three times as much distance by the second meeting as it did by the first. Rover Y travels 35 km before the first meeting, so it travels 3 × 35 = 105 km by the second meeting. Because Rover Y reached Station A (covering distance D) and turned back 15 km before meeting again, its total distance is D + 15 km. Equating D + 15 = 105 yields D = 90 km.
Question 25 · CAT Level
An autonomous prototype vehicle travels from Testing Station P to Testing Station Q over a total duration of exactly . The vehicle departs from Station P at an initial speed of . Under its dynamic calibration protocol, after each of the , , and minute from departure, its speed increases by . Subsequently, after each of the , , , , and minute from departure, its speed decreases by . If the vehicle arrives at Station Q at the end of the period, what is the total distance between Station P and Station Q?
Show answer and explanation
Answer: (C) 138 km
The 2-hour duration is divided into two distinct operating regimes. In the first hour, the vehicle maintains constant speeds of 60 km/h, 72 km/h, and 84 km/h across three 20-minute (1/3 hour) intervals, yielding (60 + 72 + 84)/3 = 72 km. At the 60th minute, speed increments to 96 km/h, and then decreases by 12 km/h after each subsequent 10-minute interval, giving operating speeds of 96, 84, 72, 60, 48, and 36 km/h across six 10-minute (1/6 hour) blocks. Summing these speeds and dividing by 6 yields 396/6 = 66 km for the second hour. Adding both hours gives a total corridor distance of 72 + 66 = 138 km.
Try real CAT questions
Study this concept with interactive practice in PrepSoc.
Open the concept library