Practice Set 1: Foundation & Conceptual Drill
Comprehensive 25-question practice drill mirroring Chapter 6 Exercise 1 with fresh thematic scenarios and mathematically verified solutions.
Practice Set 1: Foundation & Speed Mastery
This practice set covers core foundation concepts and speed calculation patterns for Time, Speed & Distance. Work through all 25 questions under timed conditions to test concept retention.
Traps and tips
- Carefully parse the reference base before applying percentage or ratio multipliers.
- Verify whether units require conversion (hours to minutes, km/h to m/s).
- Cross-check your intermediate algebraic steps against physical constraints.
Practice questions
Question 1 · Foundation
An autonomous hyperloop pod is scheduled to transport high-priority cargo between two regional distribution centers over a fixed-length vacuum tube corridor. If the flight control system maintains the pod's cruising speed at of its standard scheduled speed throughout the journey, what fraction of the standard transit time will be required to cover the same corridor?
Show answer and explanation
Answer: (B) 4/5 of the standard time
Because distance is held constant, speed and time vary inversely according to the formula Distance = Speed × Time. When the pod travels at 5/4 of its standard speed, its velocity is multiplied by 1.25, meaning that every unit of time covers more distance. Consequently, the time required to traverse the fixed corridor contracts to the reciprocal of 5/4, which is 4/5 (or 80%) of the original time. The option 5/4 is an intuitive trap caused by confusing inverse proportionality with direct proportionality. The distractor 16/25 results from mistakenly squaring the reciprocal ratio, and 3/4 represents a miscalculated 25% reduction instead of the true 20% reduction (as 1 - 4/5 = 1/5 = 20%).
Question 2 · Foundation
An autonomous electric cargo drone flying a fixed inter-facility corridor encounters strong headwinds, prompting its navigation controller to throttle down to conserve battery power. As a result, the drone takes 25% more than its scheduled flight time to complete the journey. What was the average speed of the drone during this trip expressed as a fraction of its scheduled cruising speed?
Show answer and explanation
Answer: (C) 4/5 of the scheduled speed
When traveling a constant distance, speed is inversely proportional to time. A 25% increase in transit time means that the duration becomes 1 + 0.25 = 1.25 = 5/4 of the scheduled time. To maintain the same product (Distance = Speed × Time), the operating speed must be multiplied by the reciprocal of 5/4, which is 4/5 (or 80% of normal speed). A frequent mistake is picking 3/4, which assumes that a 25% increase in time corresponds to a 25% decrease in speed. However, percentages do not operate symmetrically because the reference base changes: a 25% reduction in speed from 1 to 0.75 results in a 33.33% increase in time (since 1 / 0.75 = 4/3). The option 5/4 erroneously suggests that taking more time results from traveling faster.
Question 3 · Foundation
Maglev Freight Pod Alpha departs Logistics Hub P for Terminal Q at 08:00 a.m., traveling at a steady cruising speed of 75 km/h along a dedicated guideway. High-speed Express Pod Beta departs Logistics Hub P for Terminal Q along the identical guideway at 09:00 a.m., traveling at a uniform cruising speed of 100 km/h. If Logistics Hub P and Terminal Q are 800 km apart, at what time will Express Pod Beta catch up with Freight Pod Alpha?
Show answer and explanation
Answer: (A) 12:00 noon
In a pursuit problem where two bodies move in the same direction from the same location with staggered departures, the key is to calculate the distance gap established before the second body starts. Freight Pod Alpha runs for 1 hour alone at 75 km/h, creating an initial gap of 75 km. From 09:00 a.m. onwards, Express Pod Beta travels at 100 km/h while Alpha continues at 75 km/h, closing the distance at a relative speed of 100 - 75 = 25 km/h. To close 75 km at 25 km/h requires 75 / 25 = 3 hours. Adding 3 hours to Beta's departure time of 09:00 a.m. yields 12:00 noon. Distractor 1:00 p.m. results from mistakenly adding the 3 hours to Alpha's 10:00 a.m. equivalent or miscounting hours, while 11:30 a.m. results from incorrectly averaging the speeds.
Question 4 · Foundation
An autonomous delivery truck departed Logistics Hub Alpha for Distribution Center Beta. When traveling at an average speed of 60 km/h, the truck arrived 1 hour behind its scheduled arrival time. Had the truck traveled at an average speed of 90 km/h, it would have arrived 1 hour ahead of its scheduled arrival time. What average speed must the truck maintain to reach Distribution Center Beta precisely on schedule?
Show answer and explanation
Answer: (C) 72 km/h
In early-and-late arrival scenarios over a fixed distance, students often mistakenly average the two speeds: (60 + 90)/2 = 75 km/h. This is invalid because the vehicle spends different amounts of time traveling at each speed (6 hours at 60 km/h versus 4 hours at 90 km/h). Because the late penalty (+1 hour) and early gain (-1 hour) are symmetrically balanced around the target arrival time, the target duration is the arithmetic mean of the two durations (5 hours). Because speed is inversely proportional to time, the speed that corresponds to the arithmetic mean of times is the harmonic mean of the speeds: 2 × 60 × 90 / (60 + 90) = 10,800 / 150 = 72 km/h. Distractor 75 km/h is the classic arithmetic mean trap, while 70 km/h and 80 km/h represent common algebraic arithmetic slips.
Question 5 · Foundation
Two autonomous delivery drones, Drone Alpha and Drone Beta, operate along a straight outbound logistics corridor starting from Base Station Hub. The ratio of the cruising speed of Drone Alpha to that of Drone Beta is 5 : 3. Drone Beta departs from the Hub heading East at 08:00 a.m. After 2 hours, Drone Alpha departs from the same Hub in the identical direction. At what time will Drone Alpha catch up with Drone Beta?
Show answer and explanation
Answer: (D) 1:00 p.m.
Although absolute speeds are not provided, the time required to catch up is completely determined by the ratio of speeds and the time delay. Letting the speeds be 5k and 3k, Drone Beta travels for 2 hours, covering a distance of 3k × 2 = 6k. When Drone Alpha starts at 10:00 a.m., it gains on Drone Beta at a rate of 5k - 3k = 2k per hour. The time required to eliminate the 6k distance is 6k / 2k = 3 hours. Adding 3 hours to Drone Alpha's start time (10:00 a.m.) gives 1:00 p.m. The distractor 'Cannot be determined' is a deliberate exam trap designed to test whether the student realizes that the scaling constant k cancels out. Distractor 12:00 noon comes from adding 2 hours instead of 3, and 2:00 p.m. comes from mistakenly adding 4 hours.
Question 6 · Foundation
Two autonomous delivery drones, Drone Alpha and Drone Beta, cruise along a straight aerial freight corridor in the same direction. Drone Alpha flies at a cruising speed that is in a ratio to the cruising speed of Drone Beta. Drone Alpha initiates a pursuit maneuver to dock with Drone Beta, which is flying ahead. Assuming both drones maintain constant speeds, how many kilometers must Drone Alpha travel from the start of the pursuit maneuver to successfully intercept and dock with Drone Beta?
Show answer and explanation
Answer: (C) 45 km
Because the pursuit begins and ends at the same time for both drones, the time of travel is identical. When travel time is constant, distance covered is directly proportional to speed. With a speed ratio of 5 : 3, Drone Alpha gains 2 units of distance for every 5 units it covers. Since the initial gap to close is 18 km, each unit corresponds to 18 / 2 = 9 km. Therefore, Drone Alpha covers 5 × 9 = 45 km to catch Drone Beta. The option 27 km represents the distance traveled by Drone Beta, 36 km arises from misidentifying the ratio difference as 1 unit or dividing incorrectly, and 54 km results from improperly adding the lead distance directly to a 2:1 assumption.
Question 7 · Foundation
Two automated maglev shuttles, Shuttle Alpha and Shuttle Beta, depart simultaneously at 08:20 a.m. from Station P and Station Q respectively, traveling toward each other along parallel guideways at uniform speeds. After passing each other at an intermediate crossing point, Shuttle Alpha takes 20 minutes to reach Station Q, while Shuttle Beta takes 45 minutes to reach Station P. At what time did the two shuttles pass each other?
Show answer and explanation
Answer: (B) 08:50 a.m.
When two bodies start simultaneously from opposite endpoints toward each other and take t1 and t2 units of time to reach their destinations after crossing, the elapsed time from departure to the crossing point is given by the geometric mean t = sqrt(t1 * t2). With t1 = 20 minutes and t2 = 45 minutes, t = sqrt(20 * 45) = sqrt(900) = 30 minutes. Adding 30 minutes to the departure time of 08:20 a.m. gives 08:50 a.m. The distractor 08:52 a.m. stems from mistakenly taking the arithmetic mean of 20 and 45 ((20 + 45)/2 = 32.5 minutes), 08:45 a.m. assumes an elapsed time of 25 minutes, and 08:55 a.m. assumes an elapsed time of 35 minutes.
Question 8 · Foundation
An autonomous electric survey vessel operates along a straight river fairway between Base Station Alpha and Base Station Beta. When cruising downstream with the river current, the vessel takes 4 hours to complete the trip from Alpha to Beta. When cruising upstream against the current, the vessel takes 6 hours to complete the return trip from Beta to Alpha under the identical motor thrust setting. What is the ratio of the vessel's cruising speed in still water to the speed of the river current?
Show answer and explanation
Answer: (C) 5 : 1
Because distance is constant between Base Station Alpha and Base Station Beta, the ratio of downstream speed to upstream speed is inversely proportional to their respective travel times: (u + v) / (u - v) = 6 / 4 = 3 / 2. Applying componendo and dividendo directly yields u / v = (3 + 2) / (3 - 2) = 5 / 1. The distractor 3 : 1 is the result when travel times are in a 2 : 1 ratio (such as 3 hours and 6 hours), 4 : 1 comes from taking the average or subtracting 1 incorrectly, and 5 : 2 represents the ratio of downstream speed to upstream difference without isolating the current.
Question 9 · Foundation
An autonomous coastal surveillance vessel patrols a designated shipping fairway. Telemetry indicates that the vessel achieves an effective downstream speed of when moving with the tidal current and an effective upstream speed of when navigating against the tidal current under identical engine output. What is the speed of the tidal current?
Show answer and explanation
Answer: (B) 6 km/h
The speed of the current is derived by taking half the difference between the downstream speed and the upstream speed: v = (v_down - v_up) / 2 = (30 - 18) / 2 = 6 km/h. The option 12 km/h is a common trap resulting from subtracting 18 from 30 without dividing by 2 (which gives 2v instead of v). The option 24 km/h represents the speed of the vessel in still water, computed as (30 + 18) / 2. The option 4 km/h represents an arbitrary calculation error.
Question 10 · Foundation
An autonomous regional electric delivery van departed from a fulfillment hub 12 minutes later than its scheduled departure time. By increasing its cruising speed to of its usual cruising speed for the entire trip, the delivery van arrived at the destination depot 6 minutes earlier than its scheduled arrival time. What is the usual scheduled travel time for this delivery trip?
Show answer and explanation
Answer: (B) 1 hour 30 minutes
Because distance is constant, traveling at 5/4 of the usual speed reduces travel time to 4/5 of the usual time, saving 1/5 of the usual travel duration. The total travel time saved on the road equals the departure delay plus the early arrival: 12 minutes + 6 minutes = 18 minutes. Thus, 1/5 of the usual time is 18 minutes, making the usual time 18 × 5 = 90 minutes, or 1 hour 30 minutes. The distractor 2 hours corresponds to saving 24 minutes or following the original textbook problem numbers, 1 hour 15 minutes (75 minutes) mistakenly uses a 15-minute time difference, and 1 hour 45 minutes is an overestimation.
Question 11 · Foundation
An autonomous long-range delivery drone completes a freight mission along a specialized regional aerial corridor. It navigates the first of the flight at a cruise speed of , the next at a reduced speed of through controlled airspace, and flies the remaining segment of the mission in . If the overall average speed of the drone for the entire mission is , what is the distance covered by the drone in the final of the flight?
Show answer and explanation
Answer: (C) 340 km
Average speed is defined as the total distance divided by the total time (). The flight consists of three consecutive stages. The drone requires for the first segment and for the second segment. Adding the spent on the final segment gives a total flight duration of . Since the overall average speed is , the total distance traveled is . The first two legs account for , leaving covered during the final . The distractor represents the common error of multiplying the overall average speed () by the segment duration (), which is invalid because the speed during the final segment was actually .
Question 12 · Foundation
An automated high-speed maglev train operates along a dedicated inter-city transit corridor between two metropolitan centers. Without taking into account intermediate station halts and passenger boarding intervals, the maglev maintains an average speed of . When intermediate station halts are included, its overall average speed drops to . On average, how many minutes per hour does the maglev train spend halted at intermediate stations?
Show answer and explanation
Answer: (B) 10 minutes
The presence of stoppages reduces the effective average speed because the clock continues to run while the vehicle is stationary. In one hour of total elapsed time (motion plus halts), the maglev covers . At its cruising speed of , covering requires only , or . Therefore, in every of overall trip time, the maglev is in motion for and stationary for . This matches the standard shortcut formula . The distractor arises when a student incorrectly places the reduced speed with stoppages in the denominator ().
Question 13 · Foundation
An autonomous aerial inspection drone is positioned directly behind an automated ground logistics transporter along a straight smart-highway test corridor. The drone flies forward in pursuit of the transporter at a constant speed of , while at the exact same moment the transporter travels forward in the same direction at a constant speed of . In how much time will the drone catch up to the ground transporter?
Show answer and explanation
Answer: (C) 90 seconds
To solve pursuit and overtake problems involving mixed units, first convert all velocities into consistent units (meters per second). The drone's speed is . Since both the drone and transporter move forward in the same direction, the rate at which the initial distance closes is the relative speed: . Dividing the initial separation of by this relative speed yields . In seconds, the transporter advances while the drone covers , closing the exact initial gap ().
Question 14 · Foundation
An autonomous last-mile delivery rover is dispatched to deliver medical supplies to a clinic located away from the regional distribution hub. The rover cruises at a constant operating speed of . Under system safety protocols, after every of continuous driving, the rover must execute a stationary automated battery-cooling and sensor-diagnostic pause. What is the total elapsed time taken by the rover to reach the clinic?
Show answer and explanation
Answer: (C) 3 hours 45 minutes
The total transit time consists of the pure driving time plus the time spent on scheduled stops. Traveling at takes exactly () of actual motion. Since the rover takes a pause every , the driving is completed in equal blocks. The key insight is that stops occur strictly between consecutive driving blocks. After the fourth block, the rover has arrived at the clinic, so no subsequent pause is added to the journey. Hence, there are intermediate pauses of each, totaling . The overall transit time is . The option is the classic "fencepost error" of counting four rests ().
Question 15 · Foundation
An autonomous electric freight truck operates along a dedicated logistics corridor between an intermodal rail terminal and a distribution hub. Due to severe headwind conditions and battery-conservation protocols, the truck's cruising speed is reduced by , causing it to take longer than usual to complete the journey. What is the usual cruising speed of the electric truck?
Show answer and explanation
Answer: (C) 80 km/h
The relationship between speed, distance, and time over a fixed distance with a speed reduction and time increase is given by . Rearranging gives . Substituting , , and gives . Seeking two factors differing by that multiply to , we identify and . Hence, the original speed is and the reduced speed is . At , the transit takes , while at it takes , exactly longer. Distractor is the reduced speed rather than the usual speed.
Question 16 · Foundation
An autonomous electric freight truck transports an industrial consignment across a 600 km logistics corridor in exactly 8 hours. The truck operates in an automated expressway platoon mode at an average cruising speed of 90 km/h for the first part of the journey, and navigates urban arterial access bypasses at an average speed of 50 km/h for the remainder of the route. What distance did the freight truck cover while navigating the urban arterial access bypasses at 50 km/h?
Show answer and explanation
Answer: (B) 150 km
The average speed across the entire 600 km corridor is . Using the rule of alligation, the ratio of time spent at 90 km/h to that at 50 km/h is . Since the total travel time is 8 hours, the truck travels for 5 hours at 90 km/h and for 3 hours at 50 km/h. Hence, the distance covered at 50 km/h is .
Question 17 · Foundation
A systems architect commutes between two regional research facilities, traveling from Facility Alpha to Facility Beta via a high-speed magnetic levitation (maglev) train and returning via an autonomous electric highway shuttle. The total round-trip journey takes 16 hours. If the architect had made both outward and return trips using the autonomous electric highway shuttle, the total travel time would have increased by 6 hours. How many hours would the round trip have taken if both legs had been made via the high-speed maglev train?
Show answer and explanation
Answer: (B) 10 hours
Let and represent the one-way travel times by maglev and electric shuttle, respectively. We are given hours. Traveling both ways by shuttle takes hours, which implies hours. Consequently, hours. Traveling both ways by maglev therefore requires hours. Alternatively, substituting one shuttle leg with a maglev leg reduces transit time by 6 hours, giving hours directly.
Question 18 · Foundation
An autonomous aerial surveillance drone covers a perimeter patrol corridor of 340 km in a total flight duration of 6 hours. It executes the first portion of the mission in low-altitude scan mode at an average speed of 40 km/h, and the remaining portion in high-altitude transit mode at an average speed of 70 km/h. For how much time did the drone operate in low-altitude scan mode at 40 km/h?
Show answer and explanation
Answer: (C) 22/3 hours
Let be the time spent flying at 40 km/h. The remaining hours are spent at 70 km/h. Equating the total distance: hours (or 2 hours 40 minutes). Alternatively, had the drone flown at 70 km/h for the entire 6 hours, it would have covered 420 km. The deficit of km is offset by the km/h slower speed, yielding hours directly.
Question 19 · Foundation
Due to a temporary power-grid load shedding protocol, an autonomous rapid-transit maglev capsule is restricted to operating at of its scheduled cruising speed along an inter-city corridor. As a consequence of this lower speed, the capsule arrives at its terminal destination 18 minutes behind its scheduled timetable. What is the scheduled normal transit duration for this trip?
Show answer and explanation
Answer: (B) 30 minutes
Since distance is constant, time is inversely proportional to speed. When speed decreases to of normal, time increases to of normal. The delay of 18 minutes corresponds to of the scheduled time. Therefore, the scheduled transit duration is minutes.
Question 20 · Foundation
An autonomous electric delivery drone takes off from Station Alpha toward Distribution Center Beta, separated by an aerial distance of 180 km. The drone initiates flight at an initial cruising speed of 120 km/h. Due to progressive battery thermal throttling, its speed systematically decreases by 6 km/h at the conclusion of every 20-minute flight interval. What is the total flight time required for the drone to reach Distribution Center Beta?
Show answer and explanation
Answer: (B) 100 minutes
Each 20-minute block represents hour. In successive 20-minute periods, the drone's speed is 120, 114, 108, 102, 96 km/h, covering distances of 40, 38, 36, 34, 32 km respectively. These distances form an arithmetic progression with first term and common difference . Summing the first 5 intervals gives km, which exactly matches the total distance. Therefore, the trip requires minutes.
Question 21 · Foundation
An autonomous electric freight hauler completes a dedicated logistics corridor between two smart fulfillment hubs at a constant cruising speed. If its cruising speed is increased by , the transit time along the corridor is reduced by . What is the usual cruising speed of the freight hauler?
Show answer and explanation
Answer: (B) 60 km/h
The problem evaluates the relationship between speed and travel time over a fixed distance of 480 km. Expressing the difference between the two transit times gives 480/v - 480/(v + 20) = 2, which simplifies to the product v(v + 20) = 4800. Factoring 4800 into two values that differ by 20 gives 60 × 80 = 4800, identifying the original cruising speed as 60 km/h. At 60 km/h, the trip takes 8 hours, whereas at 80 km/h, it takes 6 hours, confirming the 2-hour savings. Note that 80 km/h is an appealing distractor corresponding to the accelerated speed.
Question 22 · Foundation
In an intermodal freight transport corridor, an automated consignment travels of its total route distance aboard a high-speed regional hyperloop capsule and the remaining distance via an autonomous ground delivery rover. If the autonomous rover spends as long travelling as the hyperloop capsule, what is the ratio of the speed of the autonomous rover to that of the hyperloop capsule?
Show answer and explanation
Answer: (B) 1 : 25
Speed is directly proportional to distance and inversely proportional to time. The autonomous ground rover covers only 1/6 of the total corridor distance, while the hyperloop capsule covers 5/6, yielding a distance ratio of 1 : 5. Simultaneously, the rover takes 5 times as long as the hyperloop capsule, yielding an inverse time ratio of 1 : 5. Multiplying the distance fraction by the reciprocal time fraction produces (1/5) × (1/5) = 1/25. Hence, the ratio of the speed of the rover to that of the hyperloop capsule is 1 : 25.
Question 23 · Foundation
An autonomous hydrographic survey vessel travels a distance of downstream along a river channel and returns upstream to its starting dock in a total of . If the vessel's cruising speed in still water is three times the speed of the river current, find the speed of the river current.
Show answer and explanation
Answer: (B) 6 km/h
With the vessel's still-water speed equal to 3 times the current speed c, its downstream speed becomes 3c + c = 4c and its upstream speed becomes 3c - c = 2c. Traveling 48 km downstream takes 48 / (4c) = 12/c hours, while traveling 48 km upstream takes 48 / (2c) = 24/c hours. The sum of these two durations is 12/c + 24/c = 36/c hours. Equating this to the total duration of 6 hours gives 36/c = 6, so c = 6 km/h. The survey vessel's still-water speed is 18 km/h, which is included as an attractive distractor.
Question 24 · Foundation
An autonomous electric cargo hauler experiences a motor malfunction after covering of its designated transit route between two logistics terminals. It is then connected to an auxiliary recovery transport to complete the remaining distance. Fleet telemetry shows that the journey with the recovery transport took as long as the initial segment covered under its own power. How many times the speed of the recovery transport was the original speed of the cargo hauler?
Show answer and explanation
Answer: (C) 4
The cargo hauler travels 1/5 of the total trip distance before malfunctioning, leaving the recovery transport to cover the remaining 4/5 of the distance. The distance ratio between the two stages is therefore (1/5) : (4/5) = 1 : 4. Meanwhile, the recovery transport took 16 times as long as the initial segment. Because speed equals distance divided by time, the speed ratio S_1 / S_2 is (D_1 / D_2) × (T_2 / T_1) = (1/4) × 16 = 4. Consequently, the original speed of the cargo hauler was exactly 4 times that of the recovery transport.
Question 25 · Foundation
Two autonomous aerial delivery drones, Drone Alpha and Drone Beta, launch simultaneously towards each other from vertiports and , respectively, maintaining constant cruising speeds of and . After they cross each other in mid-air, Drone Alpha reaches vertiport in . In how many seconds does Drone Beta reach vertiport starting from vertiport ?
Show answer and explanation
Answer: (C) 56 seconds
After passing each other at meeting point M, Drone Alpha covers segment MY in 18 s at 20 m/s, meaning MY = 360 m. Drone Beta traversed this segment MY prior to meeting at 15 m/s, taking 360 / 15 = 24 s. Since both drones operated simultaneously, Drone Alpha also flew for 24 s before meeting, covering XM = 20 × 24 = 480 m. The entire corridor XY measures 480 + 360 = 840 m. At a steady speed of 15 m/s, Drone Beta takes 840 / 15 = 56 s to travel the full distance from Y to X. Distractor 32 s corresponds strictly to Drone Beta's post-meeting travel time (480 / 15 = 32 s).
Try real CAT questions
Study this concept with interactive practice in PrepSoc.
Open the concept library