CAT 2021 Slot 3 DILR Q5
- Data Interpretation and Logical Reasoning
- Logical Reasoning › Arrangements
- Hard
- Multiple choice
- CAT_2021_SLOT3_DILR_Q05
Data set · questions 1–6
10 players - P1, P2, ..., P10 - competed in an international javelin throw event. The number (after P) of a player reflects his rank at the beginning of the event, with rank 1 going to the topmost player. There were two phases in the event with the first phase consisting of rounds 1,2, and 3, and the second phase consisting of rounds 4, 5, and 6. A throw is measured in terms of the distance it covers (in meters, up to one decimal point accuracy), only if the throw is a 'valid' one. For an invalid throw, the distance is taken as zero. A player's score at the end of around is the maximum distance of all his throws up to that round. Players are re-ranked after every round based on their current scores. In case of a tie in scores, the player with a prevailing higher rank retains the higher rank. This ranking determines the order in which the players go for their throws in the next round.
In each of the rounds in the first phase, the players throw in increasing order of their latest rank, i.e. the player ranked 1 at that point throws first, followed by the player ranked 2 at that point and so on. The top six players at the end of the first phase qualify for the second phase. In each of the rounds in the second phase, the players throw in decreasing order of their latest rank i.e. the player ranked 6 at that point throws first, followed by the player ranked 5 at that point and so on. The players ranked 1, 2, and 3 at the end of the sixth round receive gold, silver, and bronze medals respectively.
All the valid throws of the event were of distinct distances (as per stated measurement accuracy). The tables below show distances (in meters) covered by all valid throws in the first and the third round in the event.
Distances covered by all the valid throws in the first round
| Player | Distance (in m) |
|---|---|
| P1 | 82.9 |
| P3 | 81.5 |
| P5 | 86.4 |
| P6 | 82.5 |
| P7 | 87.2 |
| P9 | 84.1 |
Distances covered by all the valid throws in the third round
| Player | Distance (in m) |
|---|---|
| P1 | 88.6 |
| P3 | 79.0 |
| P9 | 81.4 |
The following facts are also known.
i. Among the throws in the second round, only the last two were valid. Both the throws enabled these players to qualify for the second phase, with one of them qualifying with the least score. None of these players won any medal.
ii. If a player throws first in a round AND he was also the last (among the players in the current round) to throw in the previous round, then the player is said to get a double. Two players got a double.
iii. In each round of the second phase, exactly one player improved his score. Each of these improvements was by the same amount.
iv. The gold and bronze medalists improved their scores in the fifth and the sixth rounds respectively. One medal winner improved his score in the fourth round.
v. The difference between the final scores of the gold medalist and the silver medalist, as well as the difference between the final scores of the silver medalist and the bronze medalist was m.
Question 5
Which of the following can be the final score (in m) of P8?
Show answer and solution
Answer: (D)
82.7
Solution
Concept: Inequality Bounding, Sequential Throw Constraints & Qualification Cutoffs
Master State Table
| Player | R1 Score | R2 Score | R3 Score (P1 Rank) | R4 Score | R5 Score | R6 Final Score | Final Outcome |
|---|---|---|---|---|---|---|---|
| P7 | 87.2 | 87.2 | 87.2 (Rank 3) | 88.4 | 89.6 | 89.6 | Gold Medalist (Rank 1) |
| P1 | 82.9 | 82.9 | 88.6 (Rank 1) | 88.6 | 88.6 | 88.6 | Silver Medalist (Rank 2) |
| P5 | 86.4 | 86.4 | 86.4 (Rank 4) | 86.4 | 86.4 | 87.6 | Bronze Medalist (Rank 3) |
| P10 | 0.0 | (Rank 2) | Rank 4 (Double in R3) | ||||
| P9 | 84.1 | 84.1 | 84.1 (Rank 5) | 84.1 | 84.1 | 84.1 | Rank 5 |
| P8 | 0.0 | (Rank 6) | Rank 6 (Double in R4) | ||||
| P6 | 82.5 | 82.5 | 82.5 (Rank 7) | — | — | 82.5 | Eliminated after R3 |
| P3 | 81.5 | 81.5 | 81.5 (Rank 8) | — | — | 81.5 | Eliminated after R3 |
| P2 | 0.0 | 0.0 | 0.0 (Rank 9) | — | — | 0.0 | Eliminated after R3 |
| P4 | 0.0 | 0.0 | 0.0 (Rank 10) | — | — | 0.0 | Eliminated after R3 |
Question Deduction
• Lower Bound from Phase 1 Qualification:
• In Round 1, P8 threw invalidly (0.0 m). In Round 2, P8 threw validly (). In Round 3, P8 did not improve, keeping final score .
• Both P8 and P10 qualified for Phase 2, with one qualifying in 6th place (the least score).
• The highest-scoring eliminated player after Round 3 was P6 with 82.5 m.
• For P8 to qualify in 6th place ahead of P6:
$$s_8 > 82.5\text{ m}$$
• This immediately rules out Option 2 (0) and Option 3 (81.9).
• Upper Bound from the Double Condition:
• P8 received a double in Round 4, throwing 1st (decreasing rank order).
• In Round 3, qualifiers threw in increasing order of R2 ranks. For P8 to throw last among qualifiers in R3, P8 had to rank 6th among qualifiers after Round 2.
• R2 scores: P10 (), P7 (87.2), P5 (86.4), P9 (84.1), and P1 (82.9 m; P1's 88.6 m came in R3).
• If m, P8 would rank ahead of P1 after R2 and throw before P1 in R3, forfeiting the double.
• Thus, P8 had to rank below P1 after Round 2:
$$s_8 < 82.9\text{ m}$$
• Feasible Interval & Option Matching:
• Combining bounds yields the strict interval:
$$82.5\text{ m} < s_8 < 82.9\text{ m}$$
• Option 1 (85.1) exceeds 82.9 m; Options 2 (0) and 3 (81.9) fall below 82.5 m.
• Option 4 (82.7) falls strictly within .
• Option Matching:
• Matches Option 4 (82.7).
Topper Take
• Tight Interval Triage: P8 must beat P6's 82.5 m to qualify in 6th, but stay below P1's R2 score of 82.9 m to throw after P1 in R3 and secure the double. The interval isolates 82.7 instantly.
Other questions in this set
- Q1. Which two players got the double?
- Q2. Who won the silver medal?
- Q3. Who threw the last javelin in the event?
- Q4. What was the final score (in m) of the silver-medalist?
- Q6. By how much did the gold medalist improve his score (in m) in the second phase?
Arrangements questions from other CAT papers
- CAT 2025 Slot 1 DILR Q5
- CAT 2025 Slot 1 DILR Q6
- CAT 2025 Slot 1 DILR Q7
- CAT 2025 Slot 1 DILR Q8
- CAT 2025 Slot 2 DILR Q10
Practise this question with timing, notes and your mistake notebook.
Practise in PrepSoc