Practice Set 1: Foundation & Conceptual Drill
Comprehensive 25-question practice drill mirroring Chapter 7 Exercise 1 with fresh thematic scenarios and mathematically verified solutions.
Practice Set 1: Foundation & Speed Mastery
This practice set covers core foundation concepts and speed calculation patterns for Trains, Races & Circular Motion. Work through all 25 questions under timed conditions to test concept retention.
Traps and tips
- Carefully parse the reference base before applying percentage or ratio multipliers.
- Verify whether units require conversion (hours to minutes, km/h to m/s).
- Cross-check your intermediate algebraic steps against physical constraints.
Practice questions
Question 1 · Foundation
An automated maglev express transit train of length 360 m travels along an elevated guideway at a constant cruising speed of 54 km/h. How many seconds does it take for the train to completely cross a soundproofed tunnel tube of length 840 m?
Show answer and explanation
Answer: (B) 80 seconds
To completely cross an object with substantial length like a tunnel or bridge, the train must cover its own length in addition to the length of the structure. Here, the total distance is . Converting the speed into meters per second yields . Dividing the total distance by speed gives . A classic exam pitfall is ignoring the train's own length and calculating , which only accounts for the front of the train reaching the end of the tunnel, not the rear clearing it.
Question 2 · Foundation
Two prototype autonomous electric rovers, Rover Apex and Rover Bolt, are undergoing endurance calibration along a closed circular test track of circumference 450 m. If Rover Apex and Rover Bolt maintain constant speeds of 14 m/s and 9 m/s respectively in the same direction, how many more laps around the track will Rover Apex complete than Rover Bolt in a continuous 1-hour test run?
Show answer and explanation
Answer: (A) 40
The difference in the number of laps completed by two runners or vehicles moving in the same direction on a closed circular track is directly proportional to the difference in their speeds. In one second, Rover Apex gains on Rover Bolt. Across 1 hour (), the cumulative lead accumulated by Rover Apex is . Since one round around the track is , Rover Apex completes more laps than Rover Bolt. The options 72 and 112 are trap answers corresponding to the individual total laps completed by Rover Bolt and Rover Apex respectively.
Question 3 · Foundation
Two automated maglev freight transports of lengths 480 m and 720 m are traveling towards each other on adjacent parallel guideway tracks. What is the total combined distance traversed by the two transports together from the instant their front sensor cones meet to the instant their rear tail-ends completely clear each other?
Show answer and explanation
Answer: (B) 1200 m
A fundamental property of relative motion is that when two extended objects pass each other in opposite directions, the sum of the distances covered by the two objects from the moment their front ends meet to the moment their rear ends clear each other is equal to the sum of their lengths (). Even though their individual speeds determine how much of that total distance each vehicle contributes, their combined distance is always constant and equal to . Distractors like 240 m arise from erroneously taking the difference between the lengths, while 1440 m and 960 m represent doubling the longer or shorter vehicle's length.
Question 4 · Foundation
Three autonomous electric transport pods—Pod Alpha, Pod Beta, and Pod Gamma—travel along the same fixed hyperloop tube corridor connecting two logistics hubs. If the ratio of their operating cruising speeds is , what is the ratio of the transit times taken by them to complete the journey?
Show answer and explanation
Answer: (B) 20 : 15 : 12
When distance is constant, speed and time are inversely proportional (). While for two entities with speeds in the ratio , the time ratio is simply , this naive order reversal does not work for three or more entities. For three pods with speeds in the ratio , the time ratio is the ratio of their reciprocals: . Multiplying each term by the least common multiple of the denominators (which is 60) gives . The distractor is a common error resulting from naively flipping the sequence of numbers without taking true reciprocals. The option claiming the answer cannot be determined is incorrect because the unknown constant distance cancels out completely in the ratio.
Question 5 · Foundation
On the precision analog dial of an astronomical observatory chronometer, what is the acute angle between the hour hand and the minute hand when the dial indicates precisely 4:30?
Show answer and explanation
Answer: (B) 45°
At 4:30, the minute hand points directly at the numeral 6 ( from the 12 o'clock mark). However, the hour hand does not remain static at the numeral 4; in the 30 minutes that have elapsed, it moves forward by toward the numeral 5. Its position is therefore . The difference between the two positions is . A frequent mistake is assuming the hands are separated by 2 full hour divisions (), which incorrectly assumes the hour hand does not move between hours.
Question 6 · Foundation
On a high-precision analog master chronometer featuring a standard 12-hour circular dial, the minute hand and the hour hand rotate clockwise at uniform angular velocities. Starting from any instantaneous alignment where the two hands overlap, after exactly how many minutes of continuous operation will the minute hand and the hour hand coincide with each other next?
Show answer and explanation
Answer: (B) 65 5/11 minutes
A frequent misconception among students is that the hands of a clock coincide once every 60 minutes. While the minute hand completes a full 360-degree sweep in 60 minutes, the hour hand simultaneously creeps forward by 30 degrees (5 minute spaces). Consequently, at the end of 60 minutes, the minute hand is still trailing the hour hand. To close this remaining gap, the minute hand must run extra time at its relative speed of 5.5 degrees per minute. Dividing the 360-degree circumference by the relative speed of 11/2 degrees per minute yields 720/11 = 65 5/11 minutes (approximately 65 minutes and 27.27 seconds). Distractor 60 minutes ignores the hour hand's movement, 64 6/11 represents an incorrect division of 710/11, and 65 6/11 stems from a common remainder error.
Question 7 · Foundation
An autonomous environmental monitoring unit relies on an analog dial where the minute hand and the hour hand are observed to coincide once every 64 minutes of the dial's indicated time. Relative to a standard reference clock whose hands coincide every minutes, how many minutes does this monitoring unit gain in one hour?
Show answer and explanation
Answer: (B) 1 4/11 minutes
In a correctly calibrated clock, the hands require 720/11 minutes (65 5/11 minutes) between consecutive coincidences. If a clock's hands coincide every 64 minutes, the clock covers a full cycle too quickly, accumulating a lead of 720/11 - 64 = 16/11 minutes every 64 minutes. To find the gain in a standard 60-minute hour, we scale this lead by the ratio 60/64: (16/11) × (60/64) = 15/11 = 1 4/11 minutes. Distractor 16/11 minutes is the unadjusted gain over 64 minutes, while 1 5/11 minutes is an arithmetic slip. Distractor 1 1/4 minutes arises from naively approximating 65 5/11 as 65.25 and taking 65.25 - 64 = 1.25 minutes.
Question 8 · Foundation
On a precision laboratory master chronometer with a standard 12-hour circular dial, the minute hand and the hour hand rotate clockwise at uniform rates. What is the uniform time interval between any two consecutive occurrences where the minute hand and the hour hand are perpendicular (at an angle of ) to each other?
Show answer and explanation
Answer: (A) 32 8/11 minutes
A right angle (90 degrees) occurs twice during every 360-degree relative revolution of the hands: once when the minute hand is 90 degrees behind the hour hand, and once when it is 90 degrees ahead. Because these two points are diametrically opposite on the relative circle (separated by 180 degrees), the time between any two consecutive occurrences is uniform. At a relative speed of 5.5 degrees per minute, gaining 180 degrees requires 180 / 5.5 = 360/11 = 32 8/11 minutes. Notice that this duration is exactly half of the coincidence interval (65 5/11 ÷ 2 = 32 8/11). The common distractor 30 minutes assumes right angles occur twice every hour on the hour and half-hour, which is false because the hour hand continually shifts. Distractors 33 1/11 and 32 5/11 stem from inaccurate division or remainder confusion with the coincidence cycle.
Question 9 · Foundation
During a continuous 24-hour monitoring cycle, how many times will the minute hand and the hour hand of a standard analog chronometer form an angle of exactly with each other?
Show answer and explanation
Answer: (B) 44
Any specific angle θ between 0 degrees and 180 degrees occurs twice in every relative revolution of the hands: once when the minute hand is θ degrees behind the hour hand, and once when it is θ degrees ahead. In 12 hours, the minute hand makes 12 rotations while the hour hand makes 1 rotation, resulting in 12 - 1 = 11 relative laps. Thus, the angle occurs 11 × 2 = 22 times in 12 hours. In a full 24-hour day, it occurs 22 × 2 = 44 times. This rule holds true for any non-zero, non-straight angle (0° < θ < 180°), such as 84 degrees, 90 degrees, or 73 degrees. The common distractor 48 assumes the angle happens twice every hour (2 × 24 = 48), which fails because the hands lose two relative laps over 24 hours. Distractor 22 is either the 12-hour figure or the count for coincidences (0°) and opposite alignments (180°).
Question 10 · Foundation
During a continuous 24-hour observation cycle, how many times do the minute hand and the hour hand of a standard analog chronometer coincide (overlap at an angle of )?
Show answer and explanation
Answer: (B) 22 times
The hands of a clock do not coincide 24 times in a 24-hour day. Because the hour hand moves in the same direction as the minute hand, the minute hand must travel more than one full circle (specifically 65 5/11 minutes) to catch up with the hour hand. In a 12-hour period, the minute hand completes 12 revolutions while the hour hand completes 1 revolution, yielding 12 - 1 = 11 relative laps. The hands coincide at exactly 12:00, but there is no other coincidence between 11:00 and 1:00. Hence, there are 11 coincidences every 12 hours, resulting in 11 × 2 = 22 coincidences in a 24-hour day. Distractor 24 times is the classic trap of assuming one coincidence per hour. Distractor 44 times confuses coincidences (0°) with non-zero angles (such as 90° or 60°), which occur twice per relative lap. Distractor 11 times is the count for only half a day (12 hours).
Question 11 · Foundation
Two autonomous electric rovers, Rover Apex and Rover Bolt, are deployed from the exact same start-line checkpoint on a closed circular proving ground of circumference . They commence testing at the same instant, traveling in opposite directions along the track with constant speeds of and , respectively. Under automated test protocol, upon their very first collision-avoidance crossing at an intermediate point along the perimeter, both rovers instantaneously swap their respective operating speeds without altering their directions of motion. Which rover will return to the initial start-line checkpoint first?
Show answer and explanation
Answer: (C) Both rovers will reach simultaneously
When two objects move in opposite directions from a single point on a circular track and meet at point , each object's remaining path back to the start line equals the arc just traveled by the other object. If they exchange speeds at , each object covers the other's completed arc at the other's original speed. Because the original runner covered that arc in seconds, the new runner will also cover that same arc in exactly seconds. Consequently, both objects require identical total times () to return to the starting point, arriving simultaneously. This elegant kinematic symmetry holds universally for any track length and any pair of constant speeds.
Question 12 · Foundation
In a performance sprint trial conducted in an evacuated hyperloop test tube, Pod Valkyrie defeats Pod Zephyr by a margin of . If Pod Valkyrie maintains a constant cruise speed of throughout the trial, what is the constant cruise speed of Pod Zephyr?
Show answer and explanation
Answer: (B) 15 m/s
In any race where the winner finishes while the loser is trailing by a distance , both competitors have been moving for the exact same amount of time. Consequently, the ratio of their speeds equals the ratio of the distances they covered during that time interval: . Given that Valkyrie's speed is , Zephyr's speed is . Over the seconds Valkyrie takes to complete the run, Zephyr covers , trailing by exactly .
Question 13 · Foundation
On a specialized straight testing strip, three autonomous delivery drones—Model Alpha, Model Beta, and Model Gamma—compete in standardized head-to-head sprint trials at constant speeds. In a dual trial, Model Alpha beats Model Beta by . In a separate dual trial under identical conditions, Model Beta beats Model Gamma by . By what distance would Model Alpha beat Model Gamma if both were to compete against each other in a sprint?
Show answer and explanation
Answer: (C) 85 m
A common mistake in race problems is simply adding the two margins (). However, Beta beats Gamma by only over a full run by Beta. When Alpha finishes the race, Beta has only completed . During that shorter distance, Gamma covers . Thus, when Alpha crosses the finish line at , Gamma is at , meaning Alpha beats Gamma by . The option is the standard linear-addition trap.
Question 14 · Foundation
During aerodynamic validation trials on a straight private test track of unspecified length, three autonomous electric racing pods—Pod P, Pod Q, and Pod R—run at their respective constant speeds. In the trial, Pod P defeats Pod Q by , while Pod Q defeats Pod R by . By what distance did Pod P defeat Pod R in this trial?
Show answer and explanation
Answer: (D) Cannot be determined without knowing the total track length
Unlike time margins which are strictly additive (), distance margins in races are non-linear because they depend on the speed ratio, which in turn is scaled by the length of the race course. Algebraically, the margin by which P beats R is given by , where is the length of the track. Because is not provided, the margin could take any value strictly less than depending on how long the course is. Hence, the question cannot be answered without knowing the total race length. The choice is a trap resulting from erroneously assuming distance deficits are additive.
Question 15 · Foundation
In a precision time-trial sprint along an automated maglev guideway, three experimental pods—Aero-1, Aero-2, and Aero-3—each traverse the exact same track from a standing start at constant individual cruising profiles. The telemetry records confirm that Aero-1 finishes the run ahead of Aero-2, and Aero-2 finishes the run ahead of Aero-3. By how many seconds does Aero-1 beat Aero-3 in this time-trial?
Show answer and explanation
Answer: (C) 40 seconds
Time margins in a race are strictly additive. If runner A finishes at time , runner B finishes at , and runner C finishes at . Therefore, runner A finishes ahead of runner C. Unlike distance margins (which depend on speed ratios and the length of the track, as seen in the preceding problem), time margins are simple scalar differences that do not depend on the track distance or individual velocities. The distractor 'Cannot be determined' is a common trap for students who confuse distance deficit properties with time deficit properties.
Question 16 · Foundation
During a straight-line proving ground trial on an aerospace testing track spanning 1500 metres, autonomous prototype racer Phantom defeats prototype racer Spectre by 300 metres. Assuming both prototypes maintain constant speeds from the start line to the finish line, what is the ratio of the cruising speed of Phantom to that of Spectre?
Show answer and explanation
Answer: (B) 5 : 4
In a race where two competitors start at the same time, the winner covers the full distance in time , while the competitor who is beaten covers in that exact same time . Because time is held constant, the ratio of speeds is strictly identical to the ratio of distances traveled: . The distractor inverts the ratio by placing the slower competitor first, while corresponds to an incorrect 250-metre margin.
Question 17 · Foundation
In a 1200-metre linear vacuum test corridor, Hyperloop Pod Boreas finishes the transit run 15 seconds ahead of Hyperloop Pod Zephyr. Assuming both pods maintain constant cruise velocities throughout the run, what is the ratio of the speed of Pod Boreas to that of Pod Zephyr?
Show answer and explanation
Answer: (D) Cannot be determined
To find the ratio of speeds when a race is won by a distance margin (as in Question 16), the distance ratio directly gives the speed ratio because time is identical. However, when a race is won by a time margin, both pods cover the same distance , meaning . Because the absolute duration is unknown, this expression can evaluate to infinitely many different values depending on how fast or slow the pods are traveling overall. Therefore, the ratio cannot be determined without additional data.
Question 18 · Foundation
Two autonomous planetary rover prototypes, Rover Odyssey and Rover Pioneer, are undergoing dynamic mobility testing on a closed circular proving circuit of circumference 400 metres with constant speeds of and , respectively. If both rovers start simultaneously from the same point, after how many seconds will they meet each other for the first time if they travel in (i) the same direction, and (ii) opposite directions?
Show answer and explanation
Answer: (A) 50 seconds and 20 seconds
To meet for the first time on a circular track of circumference : in the same direction, the faster runner must gain one full circumference over the slower runner, giving seconds. In opposite directions, the two runners approach each other and together must cover one full circumference, giving seconds. Hence, the respective times are 50 seconds and 20 seconds.
Question 19 · Foundation
Two automated maglev shuttles, Shuttle Apex and Shuttle Vortex, operate along a closed circular test track of circumference 180 metres with constant speeds of and , respectively. Both shuttles depart simultaneously from the same maintenance terminal in the same direction. What is the elapsed time taken by the shuttles to meet each other for the first time right at the maintenance terminal?
Show answer and explanation
Answer: (C) 60 seconds
Meeting at the starting point is independent of whether the shuttles move in the same or opposite directions, because each vehicle must independently complete a whole number of laps to be at the origin. Shuttle Apex takes seconds per lap, and Shuttle Vortex takes seconds per lap. The first time both are simultaneously at the origin is seconds. The popular choice 30 seconds is a classic distractor: it represents their first meeting anywhere on the track ( seconds), which occurs at the 90-metre mark (diametrically opposite the starting terminal), not at the terminal itself.
Question 20 · Foundation
Three autonomous electric test pods—Pod Alpha, Pod Beta, and Pod Gamma—are deployed simultaneously from the same checkpoint along a closed circular track of circumference 240 metres. They cruise in the same direction at constant speeds of , , and , respectively. After how many seconds from departure will all three pods meet one another for the first time anywhere on the track?
Show answer and explanation
Answer: (D) 60 seconds
To determine when three runners in the same direction meet for the first time anywhere on a circular track, compute the pairwise meeting times: seconds, and seconds. All three runners meet at the least common multiple of these meeting intervals: seconds. At seconds, Pod Alpha has traveled 360 m (1.5 laps), Pod Beta has traveled 600 m (2.5 laps), and Pod Gamma has traveled 1080 m (4.5 laps); thus all three are exactly halfway around the track at the 120-metre mark.
Question 21 · Foundation
Three autonomous test rovers, Alpha, Beta, and Gamma, are evaluating battery powertrains on a closed circular track of circumference . They travel simultaneously from the exact same starting point in the same direction with constant speeds of , , and , respectively. After how many seconds from the start will all three rovers meet together for the first time right at the starting line?
Show answer and explanation
Answer: (B) 120 seconds
To find when multiple runners or vehicles meet at the starting point on a circular track, compute the time each vehicle takes to complete one lap and find their least common multiple. Here, the track length is 360 m. Rover Alpha takes 360/12 = 30 seconds per lap, Rover Beta takes 360/15 = 24 seconds, and Rover Gamma takes 360/18 = 20 seconds. The rovers return to the starting line at integer multiples of their respective lap times. Finding LCM(30, 24, 20) yields 120 seconds. At 120 seconds, Alpha, Beta, and Gamma have completed 4, 5, and 6 full laps respectively, so they are all at the starting line. Note that 60 seconds is a distractor where only Alpha and Gamma are at the start line, while Beta is exactly halfway through a lap.
Question 22 · Foundation
An automated high-speed aerotrain of length travels along a dedicated guideway at a constant cruising speed. It takes exactly to completely pass a fixed optical wayside telemetry beacon. What is the cruising speed of the aerotrain in ?
Show answer and explanation
Answer: (C) 108 km/h
When a train crosses a stationary point object like a pole, lamp post, or wayside sensor, the distance covered is strictly equal to the length of the train. Here, the aerotrain of length 450 m takes 15 seconds to pass the beacon, giving a speed of 450 / 15 = 30 m/s. Converting this speed to km/h requires multiplying by 18/5: 30 × (18/5) = 108 km/h. Common traps include failing to convert units (leaving 30 km/h) or multiplying by 5/18 instead of 18/5.
Question 23 · Foundation
An automated high-speed cargo convoy, Unit Alpha, has a length of and travels along a straight parallel track alongside another cargo convoy, Unit Beta, which has a length of traveling in the same direction at a slower speed. What is the total relative distance that Unit Alpha must gain over Unit Beta to completely overtake it, measured from the instant Unit Alpha's front reaches Unit Beta's rear to the instant Unit Alpha's rear clears Unit Beta's front?
Show answer and explanation
Answer: (D) 1300 metres
To overtake a train on a parallel track, the overtaking train must advance from being completely behind the slower train to completely ahead of it. The front of the faster train must first traverse the entire length of the slower train (750 m) to reach its front, and then travel an additional distance equal to its own length (550 m) so that its rear end completely clears the slower train. Thus, the total distance that must be gained relative to the slower train is 550 + 750 = 1300 m. A very common misconception is subtracting the lengths (750 - 550 = 200 m), which only represents the difference in train lengths, not the distance to overtake.
Question 24 · Foundation
An automated commuter express train traveling at a constant speed of takes to completely pass an optical trackside signal mast and to completely cross an elevated passenger platform. What is the length of the passenger platform?
Show answer and explanation
Answer: (B) 180 metres
A train crossing a point object covers its own length, whereas crossing a platform requires covering its own length plus the platform length. The train's speed of 54 km/h is 54 × (5/18) = 15 m/s. In 16 seconds to pass the mast, the train covers its own length: 15 × 16 = 240 m. In 28 seconds to cross the platform, it covers 15 × 28 = 420 m. The platform length is 420 - 240 = 180 m. Rapidly, one can observe that the additional 28 - 16 = 12 seconds is spent exclusively traversing the platform, directly giving 15 × 12 = 180 m.
Question 25 · Foundation
In a velodrome sprint trial between two electric racers, Vector and Nexus, Vector crosses the finish line ahead of Nexus and beats Nexus by a distance of . Assuming both racers maintain constant speeds throughout the trial, what is Vector's speed?
Show answer and explanation
Answer: (B) 10 m/s
In a race where a competitor is beaten by both distance (240 m) and time (30 s), the trailing racer takes that extra time to cover the remaining distance. Here, Nexus covers the last 240 m in 30 seconds, giving a speed of 240 / 30 = 8 m/s. Nexus takes 1200 / 8 = 150 seconds to complete the entire race. Since Vector finishes 30 seconds ahead, Vector's time is 150 - 30 = 120 seconds. Thus, Vector's speed is 1200 / 120 = 10 m/s. Alternatively, in the time Vector runs 1200 m, Nexus covers 1200 - 240 = 960 m, yielding a speed ratio of 1200 : 960 = 5 : 4, so Vector's speed is (5/4) × 8 = 10 m/s. Note that 8 m/s is an attractive distractor representing Nexus's speed.
Try real CAT questions
Study this concept with interactive practice in PrepSoc.
Open the concept library