Free CAT library

Relative Speed & Linear Meeting Points

Analyze multi-body motion along linear tracks. Master relative speed additions for opposite directions, subtractions for same directions, head-start offsets, and repetitive to-and-fro linear oscillations.

1. The Story & Mental Model: The Closing Aperture & The Frozen Observer

Imagine sitting inside a train carriage stationary at a platform. Suddenly, an express train on the adjacent track shoots past your window. From your personal frame of reference, it feels as though the passing train is flying at an astonishing velocity. Now imagine you are driving on a dual-lane highway at 100 km/h100\text{ km/h}, and a sports car overtakes you at 110 km/h110\text{ km/h}. Even though both vehicles are moving at high speed relative to the earth, the sports car appears to crawl forward past your window at a leisurely 10 km/h10\text{ km/h}.

This intuitive perceptual shift is the foundation of Relative Speed. In physics and quantitative problem solving, you can mentally freeze one observer in place by subtracting their velocity from the entire universe. All other moving bodies then approach or recede at the relative velocity (SrelS_{\text{rel}}), transforming a confusing multi-body problem into a simple single-body motion problem.


2. The CAT Question Blueprint: Coordinated Linear Encounters

CAT exam questions involving relative speed span four major archetypes:

  1. Opposite-Direction Encounters (Head-On Motion):

    Two bodies approach each other from separate locations. The spatial gap between them is compressed by both velocities simultaneously:

    Srel=S1+S2S_{\text{rel}} = S_1 + S_2

  2. Same-Direction Chases (Overtakes):

    A faster body pursues a slower body with an initial head start. The separation gap closes only at the rate of excess speed:

    Srel=∣S1−S2∣S_{\text{rel}} = |S_1 - S_2|

  3. Staggered Departure Times (Head-Start Offsets):

    Train AA leaves at 7:00 AM, but Train BB leaves at 9:00 AM. Relative speed CANNOT be deployed until both bodies are simultaneously in motion. The first body must be stepped forward during the head-start window to establish the revised separation before applying relative speed.

  4. Repetitive Reflections (To-and-Fro Linear Motion):

    Two entities run back and forth between two walls separated by distance LL. Each turnaround adds twice the track length to their collective journey, generating encounters at odd multiples: L,3L,5L,7L…L, 3L, 5L, 7L\dots.


3. The Single Tactical Weapon: The Linear Relative Speed Engine

A. Fundamental Meeting Duration

Tmeet=Effective Separation DistanceSrelT_{\text{meet}} = \frac{\text{Effective Separation Distance}}{S_{\text{rel}}}

B. The 4-Step Protocol for Staggered Departures

  1. Identify Departure Times: Let Body AA depart at tAt_A and Body BB depart at tBt_B (tB>tAt_B > t_A).

  2. Advance the Clock of Body AA: Calculate individual distance covered by AA during the solo window Δt=tB−tA\Delta t = t_B - t_A:

    Dhead-start=SA×(tB−tA)D_{\text{head-start}} = S_A \times (t_B - t_A)

  3. Compute Effective Separation at Time tBt_B:

    Deffective=Dinitial−Dhead-start(moving toward each other)D_{\text{effective}} = D_{\text{initial}} - D_{\text{head-start}} \quad (\text{moving toward each other})

    Deffective=Dhead-start(same-direction chase starting from same point)D_{\text{effective}} = D_{\text{head-start}} \quad (\text{same-direction chase starting from same point})

  4. Execute Relative Speed:

    Time to meet after tB=DeffectiveSrel\text{Time to meet after } t_B = \frac{D_{\text{effective}}}{S_{\text{rel}}}

C. Repetitive Linear Oscillations (To-and-Fro Between Walls of Length LL)

When two bodies start simultaneously from opposite endpoints of a linear corridor of length LL and bounce back and forth indefinitely:

  • 1st Meeting: Together they cover the track once:

    Dcombined(1)=L  ⟹  T1=LSA+SBD_{\text{combined}}^{(1)} = L \implies T_1 = \frac{L}{S_A + S_B}

  • 2nd Meeting: Each goes to the end, reflects, and crosses. Together they cover 2L2L more:

    Dcombined(2)=L+2L=3L  ⟹  T2=3LSA+SB=3T1D_{\text{combined}}^{(2)} = L + 2L = 3L \implies T_2 = \frac{3L}{S_A + S_B} = 3 T_1

  • General nthn^{\text{th}} Meeting:

    Dcombined(n)=(2n−1)L  ⟹  Tn=(2n−1)T1D_{\text{combined}}^{(n)} = (2n - 1) L \implies T_n = (2n - 1) T_1

  • Individual Distance Covered by Body AA up to nthn^{\text{th}} Meeting:

    DA(n)=SASA+SB×(2n−1)LD_A^{(n)} = \frac{S_A}{S_A + S_B} \times (2n - 1)L

D. The Cross-Over Theorem (Post-Crossing Flight Times)

Two entities start simultaneously from points PP and QQ toward each other at speeds SAS_A and SBS_B. They pass each other at intermediate point MM, and take times tAt_A and tBt_B after the meeting to reach their respective destinations QQ and PP.

SASB=tBtA\frac{S_A}{S_B} = \sqrt{\frac{t_B}{t_A}}

Pre-meeting transit duration: tmeet=tA⋅tB\text{Pre-meeting transit duration: } t_{\text{meet}} = \sqrt{t_A \cdot t_B}


4. The Classic Exam Trap & Speed Shortcut

The Asynchronous Relative Speed Blunder:

If Train 1 leaves at 7:00 AM and Train 2 leaves at 8:30 AM, dividing initial distance by (S1+S2)(S_1 + S_2) immediately is a fatal error. Relative speed exists ONLY when both entities are moving simultaneously. Always advance the earlier body first!

Inverted Radical Indices in the Cross-Over Theorem:

Notice the inverted subscript pairing: SASB=tBtA\frac{S_A}{S_B} = \sqrt{\frac{t_B}{t_A}}. SAS_A pairs with tBt_B in the numerator under the radical! Forgetting this flip leads to inverted speed ratios.

The Odd Number Reflection Rule:

In linear to-and-fro problems, combined distance traversed across successive meetings is always odd multiples of track length: 1L,3L,5L,7L…1L, 3L, 5L, 7L\dots. The nthn^{\text{th}} meeting occurs at (2n−1)L(2n - 1)L.

Formulas

Relative Speed (Opposite Directions)

Srel=SA+SBS_{\text{rel}} = S_A + S_B

Used when bodies move toward each other or diverge apart
Relative Speed (Same Direction)

Srel=∣SA−SB∣S_{\text{rel}} = |S_A - S_B|

Used during chases, overtakes, or lead widening
Linear Meeting Duration

Tmeet=DeffectiveSrelT_{\text{meet}} = \frac{D_{\text{effective}}}{S_{\text{rel}}}

Applies strictly from the moment both bodies are in active motion
Cross-Over Speed Ratio Theorem

SASB=tBtA\frac{S_A}{S_B} = \sqrt{\frac{t_B}{t_A}}

t_A and t_B are times taken after crossing to reach destinations
Cross-Over Meeting Time

tmeet=tA⋅tBt_{\text{meet}} = \sqrt{t_A \cdot t_B}

Elapsed travel time from simultaneous departure to meeting
Combined Distance for n-th Linear Encounter

Dcombined(n)=(2n−1)LD_{\text{combined}}^{(n)} = (2n - 1) L

Applies to to-and-fro oscillations between two terminal walls separated by L

Traps and tips

  • Head-Start Timing Trap: Never divide initial distance by (S_A + S_B) if departures are staggered. Advance the clock of the earlier body to synchronize start times.
  • Inverted Time Indices in Cross-Over Theorem: Notice that S_A / S_B = sqrt(t_B / t_A). The indices are flipped! S_A pairs with t_B in the numerator under the radical.
  • To-and-Fro Odd Multipliers: Remember the sequence of combined distances is L, 3L, 5L, 7L... Every meeting after the first adds 2L to the collective distance.
  • Same Point Chase: When chasing from the same point with a head start of Delta t, the gap to close is S_slower * Delta t, closing at (S_faster - S_slower).

Solved examples

Example 4.1: Intercity High-Speed Rail with Staggered Departures (Opposite Directions)

Terminal Station XX and Terminal Station YY are separated by a railway track of 630 km630\text{ km}. Train AA departs from Station XX at 07:00 AM07:00\text{ AM} heading toward Station YY at a steady speed of 75 km/h75\text{ km/h}. Train BB departs from Station YY heading toward Station XX at 09:00 AM09:00\text{ AM} at a steady speed of 85 km/h85\text{ km/h}. At what exact time do the two trains pass each other, and at what distance from Station XX does the encounter take place?

Show solution

Step 1: Synchronize departure times.

Train AA departs at 07:00 AM07:00\text{ AM}, while Train BB departs at 09:00 AM09:00\text{ AM}.

Head-start duration for Train AA:

Δt=09:00−07:00=2 hours\Delta t = 09:00 - 07:00 = 2\text{ hours}

Step 2: Calculate head-start distance covered by Train AA.

DA=SA×Δt=75 km/h×2 hours=150 kmD_A = S_A \times \Delta t = 75\text{ km/h} \times 2\text{ hours} = 150\text{ km}

Step 3: Determine remaining separation distance at 09:00 AM.

Deffective=630−150=480 kmD_{\text{effective}} = 630 - 150 = 480\text{ km}

Step 4: Apply relative speed for opposite directions.

From 09:00 AM09:00\text{ AM} onwards, both trains are in motion toward each other:

Srel=SA+SB=75+85=160 km/hS_{\text{rel}} = S_A + S_B = 75 + 85 = 160\text{ km/h}

Time to meet after 09:00 AM=DeffectiveSrel=480160=3 hours\text{Time to meet after 09:00 AM} = \frac{D_{\text{effective}}}{S_{\text{rel}}} = \frac{480}{160} = 3\text{ hours}

Step 5: Determine exact clock time and distance from Station XX.

Meeting Clock Time=09:00 AM+3 hours=12:00 PM (Noon)\text{Meeting Clock Time} = 09:00\text{ AM} + 3\text{ hours} = 12:00\text{ PM (Noon)}

Total travel time of Train AA from departure:

TA=2 hours (alone)+3 hours (joint)=5 hoursT_A = 2\text{ hours (alone)} + 3\text{ hours (joint)} = 5\text{ hours}

Distance from Station X=SA×TA=75 km/h×5 hours=375 km\text{Distance from Station } X = S_A \times T_A = 75\text{ km/h} \times 5\text{ hours} = 375\text{ km}

(Check with Train BB: 85×3=255 km85 \times 3 = 255\text{ km} from YY, and 375+255=630 km375 + 255 = 630\text{ km}.)

Takeaway: Always advance the earlier moving body to synchronize start times before deploying relative speed formulas.

Example 4.2: Highway Security Drone Intercept Pursuit (Same Direction / Chase)

An unauthorized speeding vehicle barrels past a highway automated toll checkpoint traveling at a constant speed of 90 km/h90\text{ km/h}. Exactly 20 minutes20\text{ minutes} later, highway authorities scramble an interceptor pursuit drone from the same toll checkpoint, flying along the highway corridor at a maximum pursuit speed of 150 km/h150\text{ km/h}. Calculate: (1) the duration of the drone flight required to intercept the vehicle, and (2) the distance from the toll checkpoint where the interception occurs.

Show solution

Step 1: Calculate the head-start lead distance.

The unauthorized vehicle travels solo for 20 minutes20\text{ minutes}:

Δt=20 minutes=2060 hours=13 hour\Delta t = 20\text{ minutes} = \frac{20}{60}\text{ hours} = \frac{1}{3}\text{ hour}

Lead distance established by the vehicle:

Dlead=Svehicle×Δt=90 km/h×13 h=30 kmD_{\text{lead}} = S_{\text{vehicle}} \times \Delta t = 90\text{ km/h} \times \frac{1}{3}\text{ h} = 30\text{ km}

Step 2: Apply relative speed for same-direction motion.

Both entities travel in the same direction along the highway:

Srel=Sdrone−Svehicle=150−90=60 km/hS_{\text{rel}} = S_{\text{drone}} - S_{\text{vehicle}} = 150 - 90 = 60\text{ km/h}

Step 3: Calculate the chase duration.

Pursuit Time T=DleadSrel=30 km60 km/h=0.5 hours=30 minutes\text{Pursuit Time } T = \frac{D_{\text{lead}}}{S_{\text{rel}}} = \frac{30\text{ km}}{60\text{ km/h}} = 0.5\text{ hours} = 30\text{ minutes}

Step 4: Compute the interception distance from the checkpoint.

Dintercept=Sdrone×T=150 km/h×0.5 hours=75 kmD_{\text{intercept}} = S_{\text{drone}} \times T = 150\text{ km/h} \times 0.5\text{ hours} = 75\text{ km}

(Verification via vehicle: Total vehicle time =20 min+30 min=50 min=56 h= 20\text{ min} + 30\text{ min} = 50\text{ min} = \frac{5}{6}\text{ h}. Distance =90×56=75 km= 90 \times \frac{5}{6} = 75\text{ km}.)

Takeaway: In same-direction chases, the head-start gap is S slow delta t, which collapses at the relative speed differential (S fast - S slow).

Example 4.3: Supersonic Cargo Transports with Post-Meeting Flight Times (Cross-Over Theorem)

Two supersonic cargo transports, Aero-1 and Aero-2, take off simultaneously from airbases Alpha and Beta respectively, flying directly toward each other along the same geodesic corridor at constant cruise speeds. They pass each other at midpoint corridor waypoint MM. Following their meeting, Aero-1 requires 4 hours4\text{ hours} to reach airbase Beta, while Aero-2 requires 9 hours9\text{ hours} to reach airbase Alpha. If Aero-1 cruises at 720 km/h720\text{ km/h}, determine: (1) the cruising speed of Aero-2, (2) the elapsed flight time prior to their meeting, and (3) the total distance between airbases Alpha and Beta.

Show solution

Step 1: Identify given post-crossing flight times.

  • Post-meeting time for Aero-1 to finish route: t1=4 hourst_1 = 4\text{ hours}

  • Post-meeting time for Aero-2 to finish route: t2=9 hourst_2 = 9\text{ hours}

  • Cruise speed of Aero-1: S1=720 km/hS_1 = 720\text{ km/h}

Step 2: Apply the Cross-Over Theorem to find S2S_2.

S1S2=t2t1=94=32\frac{S_1}{S_2} = \sqrt{\frac{t_2}{t_1}} = \sqrt{\frac{9}{4}} = \frac{3}{2}

S2=S1×23=720×23=480 km/hS_2 = S_1 \times \frac{2}{3} = 720 \times \frac{2}{3} = 480\text{ km/h}

Step 3: Compute the pre-meeting flight duration.

tmeet=t1⋅t2=4×9=36=6 hourst_{\text{meet}} = \sqrt{t_1 \cdot t_2} = \sqrt{4 \times 9} = \sqrt{36} = 6\text{ hours}

Step 4: Compute the total corridor distance.

  • Distance from Alpha to MM: D1=S1×tmeet=720×6=4320 kmD_1 = S_1 \times t_{\text{meet}} = 720 \times 6 = 4320\text{ km}

  • Distance from MM to Beta: D2=S2×tmeet=480×6=2880 kmD_2 = S_2 \times t_{\text{meet}} = 480 \times 6 = 2880\text{ km}

Total Distance D=D1+D2=4320+2880=7200 km\text{Total Distance } D = D_1 + D_2 = 4320 + 2880 = 7200\text{ km}

(Verification: D1=S2×t2=480×9=4320 kmD_1 = S_2 \times t_2 = 480 \times 9 = 4320\text{ km}; D2=S1×t1=720×4=2880 kmD_2 = S_1 \times t_1 = 720 \times 4 = 2880\text{ km}.)

Takeaway: The Cross-Over Theorem S1/S2 = sqrt(t2/t1) and t meet = sqrt(t1 t2) resolves multi-variable post-meeting problems instantaneously.

Example 4.4: Autonomous Shuttles Oscillating in a Test Corridor (Linear To-and-Fro Encounters)

Two autonomous test shuttles, Shuttle PP and Shuttle QQ, start simultaneously from opposite ends of a straight test track of length L=600 metersL = 600\text{ meters}. Shuttle PP moves at 18 m/s18\text{ m/s} and Shuttle QQ moves at 12 m/s12\text{ m/s}. Both shuttles reverse direction instantaneously upon reaching either terminal end and continue moving back and forth indefinitely. Find: (1) the time elapsed and location of their first meeting, and (2) the time elapsed and exact position of their third meeting.

Show solution

Step 1: Compute time and position for the 1st meeting.

For the first encounter, their combined distance equals the single corridor length L=600 mL = 600\text{ m}:

Srel=SP+SQ=18+12=30 m/sS_{\text{rel}} = S_P + S_Q = 18 + 12 = 30\text{ m/s}

T1=LSrel=600 m30 m/s=20 secondsT_1 = \frac{L}{S_{\text{rel}}} = \frac{600\text{ m}}{30\text{ m/s}} = 20\text{ seconds}

Distance covered by Shuttle PP from its starting terminal:

DP(1)=SP×T1=18×20=360 metersD_{P}^{(1)} = S_P \times T_1 = 18 \times 20 = 360\text{ meters}

So the 1st meeting occurs 360 m360\text{ m} from PP's starting end (240 m240\text{ m} from QQ's end).

Step 2: Compute time for the 3rd meeting.

For the nthn^{\text{th}} encounter, combined distance is (2n−1)L(2n - 1)L.

For n=3n = 3:

Dcombined(3)=(2×3−1)L=5L=5×600=3000 metersD_{\text{combined}}^{(3)} = (2 \times 3 - 1) L = 5L = 5 \times 600 = 3000\text{ meters}

T3=300030=100 seconds(or T3=5×T1=5×20=100 s)T_3 = \frac{3000}{30} = 100\text{ seconds} \quad (\text{or } T_3 = 5 \times T_1 = 5 \times 20 = 100\text{ s})

Step 3: Determine the position of the 3rd meeting.

Total distance covered by Shuttle PP in 100 seconds100\text{ seconds}:

DP(3)=SP×T3=18×100=1800 metersD_P^{(3)} = S_P \times T_3 = 18 \times 100 = 1800\text{ meters}

Track length is 600 m600\text{ m}. Analyzing PP's path:

1800600=3.0 full lengths of the track\frac{1800}{600} = 3.0 \text{ full lengths of the track}

  • 1st length (00 to 600 m600\text{ m}): reaches QQ's end.

  • 2nd length (600600 to 1200 m1200\text{ m}): returns to PP's starting end.

  • 3rd length (12001200 to 1800 m1800\text{ m}): reaches QQ's starting end!

Therefore, the 3rd meeting takes place precisely at the opposite terminal (QQ's starting end, 600 m600\text{ m} from PP's origin).

Takeaway: In to-and-fro linear motion, the combined distance for the n-th meeting is (2n - 1)L. Total distance for body P is S P T n, easily mapped by folding across track length L.

Example 4.5: Delayed Same-Direction Departures with Safe Trailing Separation (Chase & Overtake Window)

Two cargo freight trains, Train 1 and Train 2, depart from Terminal MM traveling toward Terminal NN, separated by a distance of 450 km450\text{ km} along a single bidirectional line. Train 1 leaves at 08:00 AM08:00\text{ AM} cruising at 60 km/h60\text{ km/h}. Train 2 departs along an overtaking track from Terminal MM at 10:00 AM10:00\text{ AM} cruising at 100 km/h100\text{ km/h}. (1) At what time does Train 2 overtake Train 1? (2) How far from Terminal MM does the overtake occur? (3) Does the overtake occur before Train 1 reaches Terminal NN?

Show solution

Step 1: Compute head-start distance of Train 1.

Train 1 travels alone between 08:00 AM08:00\text{ AM} and 10:00 AM10:00\text{ AM} (2 hours2\text{ hours}):

Dlead=60 km/h×2 hours=120 kmD_{\text{lead}} = 60\text{ km/h} \times 2\text{ hours} = 120\text{ km}

Step 2: Apply same-direction relative speed.

From 10:00 AM10:00\text{ AM} onwards, both trains are traveling in the same direction:

Srel=S2−S1=100−60=40 km/hS_{\text{rel}} = S_2 - S_1 = 100 - 60 = 40\text{ km/h}

Step 3: Calculate overtake duration.

Tovertake=DleadSrel=120 km40 km/h=3 hoursT_{\text{overtake}} = \frac{D_{\text{lead}}}{S_{\text{rel}}} = \frac{120\text{ km}}{40\text{ km/h}} = 3\text{ hours}

Clock time of overtake:

Overtake Time=10:00 AM+3 hours=01:00 PM\text{Overtake Time} = 10:00\text{ AM} + 3\text{ hours} = 01:00\text{ PM}

Step 4: Compute location and check track boundary.

Distance from Terminal MM where overtake takes place:

Dovertake=S2×Tovertake=100 km/h×3 hours=300 kmD_{\text{overtake}} = S_2 \times T_{\text{overtake}} = 100\text{ km/h} \times 3\text{ hours} = 300\text{ km}

Since Terminal NN is at 450 km450\text{ km}, and 300 km<450 km300\text{ km} < 450\text{ km}, the overtake successfully occurs along the corridor before Train 1 reaches Terminal NN.

Takeaway: Advance the earlier train to establish the lead distance, divide by the relative speed differential to find overtake time, and check against track length limits.

Example 4.6: Dual Departure from Opposite Terminals with Scheduled Mid-Route Stoppage (Stoppage Time Dynamics)

Two cyclists, Arjun and Kabir, depart simultaneously at 06:00 AM06:00\text{ AM} from towns AA and BB, separated by 200 km200\text{ km}, riding toward each other. Arjun rides at 30 km/h30\text{ km/h} and Kabir rides at 20 km/h20\text{ km/h}. After riding for 2 hours2\text{ hours}, Arjun halts at a highway rest stop for exactly 1 hour1\text{ hour} to service his bicycle, while Kabir continues riding uninterrupted. After the 1 hour1\text{ hour} halt, Arjun resumes riding at his original speed. At what clock time do they meet, and how far from town AA does the encounter take place?

Show solution

Step 1: Track progress during the initial 2 hours (06:00 AM to 08:00 AM).

Both cyclists are riding toward each other:

  • Distance covered by Arjun: DA(1)=30×2=60 kmD_A^{(1)} = 30 \times 2 = 60\text{ km}

  • Distance covered by Kabir: DK(1)=20×2=40 kmD_K^{(1)} = 20 \times 2 = 40\text{ km}

Combined distance covered: 60+40=100 km60 + 40 = 100\text{ km}.

Remaining separation at 08:00 AM08:00\text{ AM}:

Dsep, 08:00=200−100=100 kmD_{\text{sep, 08:00}} = 200 - 100 = 100\text{ km}

Step 2: Track progress during Arjun's 1-hour stoppage (08:00 AM to 09:00 AM).

Arjun remains stationary (SA=0S_A = 0). Only Kabir rides:

  • Distance covered by Kabir: DK(2)=20×1=20 kmD_K^{(2)} = 20 \times 1 = 20\text{ km}

Remaining separation at 09:00 AM09:00\text{ AM}:

Deffective=100−20=80 kmD_{\text{effective}} = 100 - 20 = 80\text{ km}

Step 3: Apply relative speed after 09:00 AM when both are moving.

Both cyclists are riding toward each other:

Srel=SA+SK=30+20=50 km/hS_{\text{rel}} = S_A + S_K = 30 + 20 = 50\text{ km/h}

Time to meet from 09:00 AM09:00\text{ AM}:

Tmeet=DeffectiveSrel=80 km50 km/h=1.6 hours=1 hour 36 minutesT_{\text{meet}} = \frac{D_{\text{effective}}}{S_{\text{rel}}} = \frac{80\text{ km}}{50\text{ km/h}} = 1.6\text{ hours} = 1\text{ hour } 36\text{ minutes}

Step 4: Determine meeting clock time and distance from Town AA.

Meeting Clock Time=09:00 AM+1 h 36 min=10:36 AM\text{Meeting Clock Time} = 09:00\text{ AM} + 1\text{ h } 36\text{ min} = 10:36\text{ AM}

Arjun rode for 2 hours+1.6 hours=3.6 hours2\text{ hours} + 1.6\text{ hours} = 3.6\text{ hours} in total:

Distance from Town A=SA×3.6 h=30×3.6=108 km\text{Distance from Town } A = S_A \times 3.6\text{ h} = 30 \times 3.6 = 108\text{ km}

(Verification via Kabir: Kabir rode continuously for 2+1+1.6=4.6 hours2 + 1 + 1.6 = 4.6\text{ hours}. Distance =20×4.6=92 km= 20 \times 4.6 = 92\text{ km}. Sum =108+92=200 km= 108 + 92 = 200\text{ km}.)

Takeaway: Handle mid-journey stoppages sequentially by deducting distance covered by active travelers during the halt before reapplying relative speed.

Practice questions

Question 1 · CAT Level

Two automated shuttles, Alpha and Beta, start simultaneously from opposite terminals PP and QQ along a straight dedicated test corridor of length DD, traveling towards each other at constant speeds. Upon reaching the opposite terminal, each shuttle immediately reverses direction without any pause. They cross each other for the first time at a point 720 m720\text{ m} from terminal PP. They cross each other for the second time (traveling in opposite directions after turning back) at a point 480 m480\text{ m} from terminal QQ. What is the corridor length DD?

  1. A

    1200 m1200\text{ m}

  2. B

    1440 m1440\text{ m}

  3. C

    1680 m1680\text{ m}

  4. D

    1920 m1920\text{ m}

Show answer and explanation

Answer: (C) 1680 m

At the first meeting, the two shuttles collectively cover a distance of DD, and shuttle Alpha covers 720 m720\text{ m} from PP.

At the second meeting, the shuttles collectively cover 3D3D, meaning each shuttle covers exactly 33 times the distance it covered up to the first meeting.

Thus, shuttle Alpha has traveled a total cumulative distance of 3×720=2160 m.3 \times 720 = 2160\text{ m}.

Shuttle Alpha traveled from PP to QQ (DD) and turned back, meeting Beta 480 m480\text{ m} from QQ, so its total distance is D+480 m.D + 480\text{ m}.

Equating the two expressions gives D+480=2160  ⟹  D=1680 m.D + 480 = 2160 \implies D = 1680\text{ m}.

Question 2 · CAT Level

Two express trains, T1T_1 and T2T_2, depart simultaneously from New Delhi and Kanpur respectively, traveling towards each other along parallel tracks. After meeting at an intermediate junction MM, train T1T_1 takes 4 hours and 48 minutes4\text{ hours and } 48\text{ minutes} to reach Kanpur, while train T2T_2 takes 3 hours and 20 minutes3\text{ hours and } 20\text{ minutes} to reach New Delhi. If the track distance between New Delhi and Kanpur is 440 km440\text{ km}, what is the absolute difference in the speeds of the two trains?

  1. A

    8 km/h8\text{ km/h}

  2. B

    10 km/h10\text{ km/h}

  3. C

    12 km/h12\text{ km/h}

  4. D

    15 km/h15\text{ km/h}

Show answer and explanation

Answer: (B) 10 km/h

Converting post-meeting times to improper fractions: t1=445=245 hrt_1 = 4\frac{4}{5} = \frac{24}{5}\text{ hr} and t2=313=103 hr.t_2 = 3\frac{1}{3} = \frac{10}{3}\text{ hr}.

By the Cross-Over Theorem, speed ratio is S1S2=t2t1=10/324/5=2536=56\frac{S_1}{S_2} = \sqrt{\frac{t_2}{t_1}} = \sqrt{\frac{10/3}{24/5}} = \sqrt{\frac{25}{36}} = \frac{5}{6}, so let S1=5kS_1 = 5k and S2=6kS_2 = 6k.

The pre-meeting travel time for both trains is tmeet=t1t2=245×103=16=4 hours.t_{\text{meet}} = \sqrt{t_1 t_2} = \sqrt{\frac{24}{5} \times \frac{10}{3}} = \sqrt{16} = 4\text{ hours}.

Total distance is D=(S1+S2)tmeet=(5k+6k)×4=44k=440 km  ⟹  k=10 km/h.D = (S_1 + S_2) t_{\text{meet}} = (5k + 6k) \times 4 = 44k = 440\text{ km} \implies k = 10\text{ km/h}.

The difference between their speeds is S2−S1=6k−5k=k=10 km/h.S_2 - S_1 = 6k - 5k = k = 10\text{ km/h}.

Question 3 · CAT Level

Three endurance runners, A,B,A, B, and CC, start sequentially from the same starting marker along a long straight trail in the same direction: AA departs at 8:00 AM at 12 km/h12\text{ km/h}, BB departs at 9:00 AM at 15 km/h15\text{ km/h}, and CC departs at 10:00 AM at a uniform speed vCv_C. If runner CC overtakes runner BB exactly 2 hours2\text{ hours} after runner BB overtakes runner AA, what is the running speed vCv_C?

  1. A

    16.5 km/h16.5\text{ km/h}

  2. B

    18 km/h18\text{ km/h}

  3. C

    19.5 km/h19.5\text{ km/h}

  4. D

    20 km/h20\text{ km/h}

Show answer and explanation

Answer: (B) 18 km/h

When BB departs at 9:00 AM, AA has a head start of 12 km/h×1 hr=12 km.12\text{ km/h} \times 1\text{ hr} = 12\text{ km}.

The relative speed is 15−12=3 km/h15 - 12 = 3\text{ km/h}, so BB overtakes AA after 123=4 hours\frac{12}{3} = 4\text{ hours}, at 1:00 PM, covering 15×4=60 km.15 \times 4 = 60\text{ km}.

CC overtakes BB two hours later at 3:00 PM, at which point BB has traveled an additional 15×2=30 km15 \times 2 = 30\text{ km}, reaching the 90 km90\text{ km} mark.

Since CC departed at 10:00 AM, CC's total travel time up to 3:00 PM is 5 hours.5\text{ hours}.

Therefore, the cruising speed of CC is 90 km5 hours=18 km/h.\frac{90\text{ km}}{5\text{ hours}} = 18\text{ km/h}.

Question 4 · CAT Level

Stations XX and YY are separated by 310 km310\text{ km} along a straight railway line. Commuter PP leaves XX for YY at 7:00 AM traveling at 40 km/h40\text{ km/h}. Commuter QQ leaves YY for XX at 8:00 AM traveling at 50 km/h50\text{ km/h}. They cross each other at an intermediate station MM. Immediately upon meeting, PP turns around and heads back towards station XX at an upgraded speed of 60 km/h60\text{ km/h}, while QQ continues toward XX at his unchanged speed of 50 km/h50\text{ km/h}. How many minutes before QQ does PP reach station XX?

  1. A

    24 minutes24\text{ minutes}

  2. B

    28 minutes28\text{ minutes}

  3. C

    32 minutes32\text{ minutes}

  4. D

    36 minutes36\text{ minutes}

Show answer and explanation

Answer: (C) 32 minutes

Between 7:00 AM and 8:00 AM, PP covers 40 km40\text{ km}, leaving 310−40=270 km310 - 40 = 270\text{ km} between them at relative speed 40+50=90 km/h.40 + 50 = 90\text{ km/h}.

They meet after 27090=3 hours\frac{270}{90} = 3\text{ hours} at 11:00 AM, placing meeting point MM at a distance of 40+40×3=160 km40 + 40 \times 3 = 160\text{ km} from XX.

From MM to XX (160 km160\text{ km}), PP travels at 60 km/h60\text{ km/h} taking tP=16060 hr=2 hr 40 min=160 min.t_P = \frac{160}{60}\text{ hr} = 2\text{ hr } 40\text{ min} = 160\text{ min}.

QQ travels the same 160 km160\text{ km} at 50 km/h50\text{ km/h} taking tQ=16050 hr=3 hr 12 min=192 min.t_Q = \frac{160}{50}\text{ hr} = 3\text{ hr } 12\text{ min} = 192\text{ min}.

Therefore, PP reaches station XX exactly 192−160=32 minutes192 - 160 = 32\text{ minutes} before Q.Q.

Question 5 · CAT Level

A highway patrol interceptor stationed at Mile Marker 00 receives an alert that a speeding violator passed Mile Marker 00 traveling along a straight expressway at a constant speed of 72 km/h72\text{ km/h}. The patrol interceptor initiates pursuit 20 minutes20\text{ minutes} later at a speed of 96 km/h96\text{ km/h}. However, after every 45 minutes45\text{ minutes} of active pursuit driving, the interceptor is delayed at an electronic clearance gate for exactly 5 minutes5\text{ minutes} while the violator continues unimpeded. At what distance from Mile Marker 00 does the patrol interceptor catch the violator?

  1. A

    108 km108\text{ km}

  2. B

    120 km120\text{ km}

  3. C

    132 km132\text{ km}

  4. D

    144 km144\text{ km}

Show answer and explanation

Answer: (B) 120 km

In the 20 min20\text{ min} head start, the getaway vehicle creates an initial gap of 72×2060=24 km.72 \times \frac{20}{60} = 24\text{ km}.

During the first 45 min=34 hr45\text{ min} = \frac{3}{4}\text{ hr} of driving at relative speed 96−72=24 km/h96 - 72 = 24\text{ km/h}, the gap reduces by 24×34=18 km24 \times \frac{3}{4} = 18\text{ km} (patrol covers 96×34=72 km96 \times \frac{3}{4} = 72\text{ km}).

During the 5 min=112 hr5\text{ min} = \frac{1}{12}\text{ hr} toll delay, the getaway car widens the gap by 72×112=6 km72 \times \frac{1}{12} = 6\text{ km}, leaving a net gap of (24−18)+6=12 km.(24 - 18) + 6 = 12\text{ km}.

The patrol car closes this remaining 12 km12\text{ km} in 1224=0.5 hr\frac{12}{24} = 0.5\text{ hr} (30 min30\text{ min}), covering an additional 96×0.5=48 km.96 \times 0.5 = 48\text{ km}.

The total interception distance from station AA is 72+48=120 km.72 + 48 = 120\text{ km}.

Try real CAT questions

Study this concept with interactive practice in PrepSoc.

Open the concept library