Practice Exercise 2 (64 Questions)
64 advanced CAT-level table questions covering multi-variable cross-tabulations, complex indices, and authentic exam sets.
Practice Exercise 2 — Advanced & Past CAT Sets
64 high-difficulty table questions.
Practice questions
Question 1 · Moderate
Directions for Questions 1 to 4
Answer the questions on the basis of the information given below.
Automated wafer fabrication at the SilicoForge Microelectronics manufacturing plant involves five sequential processing stages before finished wafer lots are stored in the cleanroom storage vault (W):
-
E — Silicon Wafer Ingestion & Slicing
-
D — Ion Implantation & Diffusion
-
C — Photolithography & Etch
-
B — Chemical-Mechanical Planarization (CMP Polishing)
-
A — Final Laser Dicing & Inspection
-
W — Cleanroom Storage Vault (Warehouse)
The sequential pipeline for each unit lot of wafers is E → D → C → B → A. After passing Stage A, the completed lot is immediately transferred into the cleanroom storage vault (W). Transfer between consecutive fabrication stages takes negligible time. Transfer of semi-processed wafer lots between any two stages occurs at the end of each 1-hour operational shift, and exactly 1 hour is required for processing during each stage. Finished wafer lots are dispatched out of the vault only at the end of the day (at 4:00 p.m.). The storage vault has unlimited holding capacity.
The operational work capacity (in wafer lots per hour) of the plant across different 1-hour shifts of the day is detailed below:
| Shift Time | E | D | C | B | A |
|---|---|---|---|---|---|
| 10:00 a.m. – 11:00 a.m. | 3 | 7 | 5 | 2 | 2 |
| 11:00 a.m. – 12:00 noon | 7 | 2 | 7 | 7 | 4 |
| 12:00 noon – 1:00 p.m. | 5 | 6 | 3 | 4 | 5 |
| 1:00 p.m. – 2:00 p.m. | 3 | 3 | 3 | 6 | 3 |
| 2:00 p.m. – 3:00 p.m. | 6 | 6 | 6 | 2 | 6 |
| 3:00 p.m. – 4:00 p.m. | 4 | 5 | 7 | 3 | 5 |
At 10:00 a.m. (start of operations), stages A, B, C, D, and E have 2, 2, 5, 7, and 3 wafer lots present in process respectively. No units are kept in the vault at 10:00 a.m. 'Outstanding' is defined as the number of unfinished wafer lots at any stage of production that cannot be processed during that shift due to equipment capacity constraints. If capacity permits, the outstanding backlog of any shift can be processed during the subsequent shift.
What is the maximum possible number of finished wafer lots that can be stored in the cleanroom storage vault at 3:00 p.m.?
Show answer and explanation
Answer: (C) 18
Step-by-Step Solution & Stage Tracking:
Let us trace the flow of processed wafer lots entering Stage A and moving into the vault (Warehouse W) shift by shift from 10:00 a.m. to 3:00 p.m.:
-
Shift 10:00 a.m. – 11:00 a.m.:
-
Stage A has 2 lots initially; capacity is 2 → 2 lots processed and moved into the vault. Cumulative in vault = .
-
Stage B has 2 lots initially; capacity is 2 → 2 lots processed and transferred to Stage A.
-
-
Shift 11:00 a.m. – 12:00 noon:
-
Stage A has 2 lots (transferred from Stage B); capacity of A is 4 → all 2 lots processed into the vault. Cumulative in vault = .
-
Stage B receives 5 lots from Stage C (which processed 5 lots in the 1st shift). Stage B capacity is 7 → all 5 lots processed and transferred to Stage A.
-
-
Shift 12:00 noon – 1:00 p.m.:
-
Stage A has 5 lots (transferred from Stage B); capacity of A is 5 → all 5 lots processed into the vault. Cumulative in vault = .
-
Stage C processed 7 lots from Stage D in the 11–12 shift and passed 7 lots to B. Capacity of B is 4 → Stage B processes 4 lots (leaving 3 lots backlog at B) and transfers 4 lots to Stage A.
-
-
Shift 1:00 p.m. – 2:00 p.m.:
-
Stage A has 4 lots (transferred from Stage B); capacity of A is 3 → 3 lots processed into the vault (leaving 1 lot backlog at A). Cumulative in vault = .
-
Stage B had 3 backlog lots + 2 lots from C = 5 lots. Capacity of B is 6 → Stage B processes all 5 lots and transfers 5 lots to Stage A.
-
-
Shift 2:00 p.m. – 3:00 p.m.:
- Stage A has 1 backlog lot + 5 lots transferred from B = 6 lots. Capacity of A is 6 → all 6 lots processed into the vault. Cumulative in vault = .
Hence, the maximum possible number of finished wafer lots stored in the cleanroom storage vault at 3:00 p.m. is 18.
Question 2 · Moderate
Directions for Questions 1 to 4
Answer the questions on the basis of the information given below.
Automated wafer fabrication at the SilicoForge Microelectronics manufacturing plant involves five sequential processing stages before finished wafer lots are stored in the cleanroom storage vault (W):
-
E — Silicon Wafer Ingestion & Slicing
-
D — Ion Implantation & Diffusion
-
C — Photolithography & Etch
-
B — Chemical-Mechanical Planarization (CMP Polishing)
-
A — Final Laser Dicing & Inspection
-
W — Cleanroom Storage Vault (Warehouse)
The sequential pipeline for each unit lot of wafers is E → D → C → B → A. After passing Stage A, the completed lot is immediately transferred into the cleanroom storage vault (W). Transfer between consecutive fabrication stages takes negligible time. Transfer of semi-processed wafer lots between any two stages occurs at the end of each 1-hour operational shift, and exactly 1 hour is required for processing during each stage. Finished wafer lots are dispatched out of the vault only at the end of the day (at 4:00 p.m.). The storage vault has unlimited holding capacity.
The operational work capacity (in wafer lots per hour) of the plant across different 1-hour shifts of the day is detailed below:
| Shift Time | E | D | C | B | A |
|---|---|---|---|---|---|
| 10:00 a.m. – 11:00 a.m. | 3 | 7 | 5 | 2 | 2 |
| 11:00 a.m. – 12:00 noon | 7 | 2 | 7 | 7 | 4 |
| 12:00 noon – 1:00 p.m. | 5 | 6 | 3 | 4 | 5 |
| 1:00 p.m. – 2:00 p.m. | 3 | 3 | 3 | 6 | 3 |
| 2:00 p.m. – 3:00 p.m. | 6 | 6 | 6 | 2 | 6 |
| 3:00 p.m. – 4:00 p.m. | 4 | 5 | 7 | 3 | 5 |
At 10:00 a.m. (start of operations), stages A, B, C, D, and E have 2, 2, 5, 7, and 3 wafer lots present in process respectively. No units are kept in the vault at 10:00 a.m. 'Outstanding' is defined as the number of unfinished wafer lots at any stage of production that cannot be processed during that shift due to equipment capacity constraints. If capacity permits, the outstanding backlog of any shift can be processed during the subsequent shift.
Which stage of production will encounter 'Outstanding' for the first time?
Show answer and explanation
Answer: (D) Stage D
Step-by-Step Analysis of Backlog Occurrence:
Let us analyze the inventory and processing capacity at each stage shift by shift:
-
Shift 1 (10:00 a.m. – 11:00 a.m.):
-
Stage E: Initial = 3, Capacity = 3 → Processed = 3, Outstanding = 0.
-
Stage D: Initial = 7, Capacity = 7 → Processed = 7, Outstanding = 0.
-
Stage C: Initial = 5, Capacity = 5 → Processed = 5, Outstanding = 0.
-
Stage B: Initial = 2, Capacity = 2 → Processed = 2, Outstanding = 0.
-
Stage A: Initial = 2, Capacity = 2 → Processed = 2, Outstanding = 0.
-
No stage encounters any outstanding backlog during the first shift.
-
-
Shift 2 (11:00 a.m. – 12:00 noon):
-
Stage D receives 3 wafer lots from Stage E at 11:00 a.m.
-
However, the processing capacity of Stage D during the 11:00 a.m. – 12:00 noon shift is only 2.
-
Consequently, Stage D can process only 2 lots, leaving lot unprocessed (Outstanding backlog).
-
All other stages have sufficient capacity to handle their incoming lots.
-
Therefore, Stage D encounters 'Outstanding' for the first time.
Question 3 · Moderate
Directions for Questions 1 to 4
Answer the questions on the basis of the information given below.
Automated wafer fabrication at the SilicoForge Microelectronics manufacturing plant involves five sequential processing stages before finished wafer lots are stored in the cleanroom storage vault (W):
-
E — Silicon Wafer Ingestion & Slicing
-
D — Ion Implantation & Diffusion
-
C — Photolithography & Etch
-
B — Chemical-Mechanical Planarization (CMP Polishing)
-
A — Final Laser Dicing & Inspection
-
W — Cleanroom Storage Vault (Warehouse)
The sequential pipeline for each unit lot of wafers is E → D → C → B → A. After passing Stage A, the completed lot is immediately transferred into the cleanroom storage vault (W). Transfer between consecutive fabrication stages takes negligible time. Transfer of semi-processed wafer lots between any two stages occurs at the end of each 1-hour operational shift, and exactly 1 hour is required for processing during each stage. Finished wafer lots are dispatched out of the vault only at the end of the day (at 4:00 p.m.). The storage vault has unlimited holding capacity.
The operational work capacity (in wafer lots per hour) of the plant across different 1-hour shifts of the day is detailed below:
| Shift Time | E | D | C | B | A |
|---|---|---|---|---|---|
| 10:00 a.m. – 11:00 a.m. | 3 | 7 | 5 | 2 | 2 |
| 11:00 a.m. – 12:00 noon | 7 | 2 | 7 | 7 | 4 |
| 12:00 noon – 1:00 p.m. | 5 | 6 | 3 | 4 | 5 |
| 1:00 p.m. – 2:00 p.m. | 3 | 3 | 3 | 6 | 3 |
| 2:00 p.m. – 3:00 p.m. | 6 | 6 | 6 | 2 | 6 |
| 3:00 p.m. – 4:00 p.m. | 4 | 5 | 7 | 3 | 5 |
At 10:00 a.m. (start of operations), stages A, B, C, D, and E have 2, 2, 5, 7, and 3 wafer lots present in process respectively. No units are kept in the vault at 10:00 a.m. 'Outstanding' is defined as the number of unfinished wafer lots at any stage of production that cannot be processed during that shift due to equipment capacity constraints. If capacity permits, the outstanding backlog of any shift can be processed during the subsequent shift.
Had there been only two stages of production, namely E and D, what would have been the maximum possible number of finished wafer lots that can be stored in the vault at 4:00 p.m.? (Assume D is the final stage of production and at 10:00 a.m., E and D have 3 and 7 units respectively.)
Show answer and explanation
Answer: (C) 29
Step-by-Step Analysis for Two-Stage Setup (E and D):
In this hypothetical setup:
-
Stage E acts as the raw material charging stage.
-
Stage D is the final production stage leading directly into the storage vault.
-
At 10:00 a.m., Stage E has 3 units and Stage D has 7 units.
Let us trace Stage D shift by shift from 10:00 a.m. to 4:00 p.m.:
-
10:00 – 11:00: D has 7 units available, capacity is 7 → 7 units processed into vault. E processes 3 units and transfers 3 to D.
-
11:00 – 12:00: D has 3 units available, capacity is 2 → 2 units processed into vault (1 unit backlog at D). E processes 7 units and transfers 7 to D.
-
12:00 – 1:00: D has 1 (backlog) + 7 (from E) = 8 units. Capacity is 6 → 6 units processed into vault (2 units backlog at D). E processes 5 units and transfers 5 to D.
-
1:00 – 2:00: D has 2 (backlog) + 5 (from E) = 7 units. Capacity is 3 → 3 units processed into vault (4 units backlog at D). E processes 3 units and transfers 3 to D.
-
2:00 – 3:00: D has 4 (backlog) + 3 (from E) = 7 units. Capacity is 6 → 6 units processed into vault (1 unit backlog at D). E processes 6 units and transfers 6 to D.
-
3:00 – 4:00: D has 1 (backlog) + 6 (from E) = 7 units. Capacity is 5 → 5 units processed into vault.
Total units processed by Stage D into the vault by 4:00 p.m.:
Hence, the maximum possible number of finished lots is 29.
Question 4 · Moderate
Directions for Questions 1 to 4
Answer the questions on the basis of the information given below.
Automated wafer fabrication at the SilicoForge Microelectronics manufacturing plant involves five sequential processing stages before finished wafer lots are stored in the cleanroom storage vault (W):
-
E — Silicon Wafer Ingestion & Slicing
-
D — Ion Implantation & Diffusion
-
C — Photolithography & Etch
-
B — Chemical-Mechanical Planarization (CMP Polishing)
-
A — Final Laser Dicing & Inspection
-
W — Cleanroom Storage Vault (Warehouse)
The sequential pipeline for each unit lot of wafers is E → D → C → B → A. After passing Stage A, the completed lot is immediately transferred into the cleanroom storage vault (W). Transfer between consecutive fabrication stages takes negligible time. Transfer of semi-processed wafer lots between any two stages occurs at the end of each 1-hour operational shift, and exactly 1 hour is required for processing during each stage. Finished wafer lots are dispatched out of the vault only at the end of the day (at 4:00 p.m.). The storage vault has unlimited holding capacity.
The operational work capacity (in wafer lots per hour) of the plant across different 1-hour shifts of the day is detailed below:
| Shift Time | E | D | C | B | A |
|---|---|---|---|---|---|
| 10:00 a.m. – 11:00 a.m. | 3 | 7 | 5 | 2 | 2 |
| 11:00 a.m. – 12:00 noon | 7 | 2 | 7 | 7 | 4 |
| 12:00 noon – 1:00 p.m. | 5 | 6 | 3 | 4 | 5 |
| 1:00 p.m. – 2:00 p.m. | 3 | 3 | 3 | 6 | 3 |
| 2:00 p.m. – 3:00 p.m. | 6 | 6 | 6 | 2 | 6 |
| 3:00 p.m. – 4:00 p.m. | 4 | 5 | 7 | 3 | 5 |
At 10:00 a.m. (start of operations), stages A, B, C, D, and E have 2, 2, 5, 7, and 3 wafer lots present in process respectively. No units are kept in the vault at 10:00 a.m. 'Outstanding' is defined as the number of unfinished wafer lots at any stage of production that cannot be processed during that shift due to equipment capacity constraints. If capacity permits, the outstanding backlog of any shift can be processed during the subsequent shift.
Had there been only two stages of production, namely B and A, what would have been the maximum possible number of finished wafer lots that can be stored in the vault at 2:00 p.m.? (Assume A is the final stage of production and B is the input stage, with 2 units present at each stage at 10:00 a.m.)
Show answer and explanation
Answer: (B) 12
Step-by-Step Analysis for Two-Stage Setup (B and A):
In this setup:
-
Stage B is the input stage.
-
Stage A is the final stage transferring lots directly into the vault.
-
At 10:00 a.m., both Stage B and Stage A have 2 units.
Let us trace the operations shift by shift up to 2:00 p.m.:
-
10:00 a.m. – 11:00 a.m.:
-
Stage A has 2 units, capacity is 2 → 2 units processed into the vault. Cumulative in vault = .
-
Stage B charges 2 units, capacity is 2 → 2 units processed and transferred to A.
-
-
11:00 a.m. – 12:00 noon:
-
Stage A has 2 units (transferred from B), capacity is 4 → 2 units processed into the vault. Cumulative in vault = .
-
Stage B charges 7 units, capacity is 7 → 7 units processed and transferred to A.
-
-
12:00 noon – 1:00 p.m.:
-
Stage A has 7 units (transferred from B), capacity is 5 → 5 units processed into vault (leaving units backlog at A). Cumulative in vault = .
-
Stage B charges 4 units, capacity is 4 → 4 units processed and transferred to A.
-
-
1:00 p.m. – 2:00 p.m.:
- Stage A has 2 (backlog) + 4 (from B) = 6 units. Capacity of A is 3 → 3 units processed into vault (leaving 3 units backlog at A). Cumulative in vault = .
Hence, the maximum possible number of finished wafer lots stored in the vault at 2:00 p.m. is 12.
Question 5 · Moderate
Directions for Questions 5 to 8
Answer the questions on the basis of the information given below.
The EVAL-AI Longitudinal Frontier Model Benchmark Suite records the distribution of benchmark evaluation score points across 14 specialized cognitive domains for foundation models from 2018 to 2023. In each of these years, benchmark test batteries evaluated candidate frontier models across these 14 domains only. The formal benchmarking suite is executed once per calendar year.
| S. No. | Evaluation Domain | 2018 | 2019 | 2020 | 2021 | 2022 | 2023 |
|---|---|---|---|---|---|---|---|
| 1 | Symbolic Algebra & Proofs | 14 | 15 | 10 | 9 | 12 | 16 |
| 2 | Semantic Analogy & Abstraction | 7 | 6 | 14 | 6 | 11 | 7 |
| 3 | Multi-Hop Analytical Reasoning | 24 | 35 | 18 | 28 | 18 | 12 |
| 4 | Algorithmic Arithmetic | 6 | 13 | 12 | 10 | 6 | 15 |
| 5 | Contextual Reading Comprehension | 36 | 30 | 24 | 18 | 18 | 30 |
| 6 | Tabular & Visual Data Interpretation | 35 | 25 | 18 | 18 | 40 | 30 |
| 7 | Logical Data Sufficiency | 12 | 5 | 16 | 4 | 18 | 3 |
| 8 | Cloze Context Fill-In | 12 | 10 | 8 | 12 | 12 | 6 |
| 9 | Spatial & Computational Geometry | 10 | 14 | 6 | 18 | 8 | 11 |
| 10 | Formal Mathematical Reasoning | 30 | 18 | 36 | 20 | 12 | 12 |
| 11 | Advanced Modern Optimization | 8 | 6 | 14 | 5 | 2 | 3 |
| 12 | Discrete Number Theory | 10 | 9 | 9 | 14 | 11 | 8 |
| 13 | Discourse Coherence & Reordering | 10 | 9 | 2 | 12 | 6 | 24 |
| 14 | Grammatical & Syntax Correction | 10 | 6 | 18 | 9 | 10 | 8 |
For how many years were the benchmark points allotted to Spatial & Computational Geometry lesser than those allotted to Semantic Analogy & Abstraction as well as Algorithmic Arithmetic?
Show answer and explanation
Answer: (A) 1
Step-by-Step Solution:
We need to identify the years in which the score points allotted to Spatial & Computational Geometry were strictly lesser than both Semantic Analogy & Abstraction and Algorithmic Arithmetic:
Let us compare the points year by year:
-
2018: Geometry = 10; Analogies = 7; Arithmetic = 6. Since and , condition is not satisfied.
-
2019: Geometry = 14; Analogies = 6; Arithmetic = 13. Since , condition is not satisfied.
-
2020: Geometry = 6; Analogies = 14; Arithmetic = 12. Here and . The condition is satisfied!
-
2021: Geometry = 18; Analogies = 6; Arithmetic = 10. Since , condition is not satisfied.
-
2022: Geometry = 8; Analogies = 11; Arithmetic = 6. While , . Condition is not satisfied.
-
2023: Geometry = 11; Analogies = 7; Arithmetic = 15. Since , condition is not satisfied.
Thus, the condition was satisfied in exactly 1 year (2020).
Question 6 · Moderate
Directions for Questions 5 to 8
Answer the questions on the basis of the information given below.
The EVAL-AI Longitudinal Frontier Model Benchmark Suite records the distribution of benchmark evaluation score points across 14 specialized cognitive domains for foundation models from 2018 to 2023. In each of these years, benchmark test batteries evaluated candidate frontier models across these 14 domains only. The formal benchmarking suite is executed once per calendar year.
| S. No. | Evaluation Domain | 2018 | 2019 | 2020 | 2021 | 2022 | 2023 |
|---|---|---|---|---|---|---|---|
| 1 | Symbolic Algebra & Proofs | 14 | 15 | 10 | 9 | 12 | 16 |
| 2 | Semantic Analogy & Abstraction | 7 | 6 | 14 | 6 | 11 | 7 |
| 3 | Multi-Hop Analytical Reasoning | 24 | 35 | 18 | 28 | 18 | 12 |
| 4 | Algorithmic Arithmetic | 6 | 13 | 12 | 10 | 6 | 15 |
| 5 | Contextual Reading Comprehension | 36 | 30 | 24 | 18 | 18 | 30 |
| 6 | Tabular & Visual Data Interpretation | 35 | 25 | 18 | 18 | 40 | 30 |
| 7 | Logical Data Sufficiency | 12 | 5 | 16 | 4 | 18 | 3 |
| 8 | Cloze Context Fill-In | 12 | 10 | 8 | 12 | 12 | 6 |
| 9 | Spatial & Computational Geometry | 10 | 14 | 6 | 18 | 8 | 11 |
| 10 | Formal Mathematical Reasoning | 30 | 18 | 36 | 20 | 12 | 12 |
| 11 | Advanced Modern Optimization | 8 | 6 | 14 | 5 | 2 | 3 |
| 12 | Discrete Number Theory | 10 | 9 | 9 | 14 | 11 | 8 |
| 13 | Discourse Coherence & Reordering | 10 | 9 | 2 | 12 | 6 | 24 |
| 14 | Grammatical & Syntax Correction | 10 | 6 | 18 | 9 | 10 | 8 |
Which evaluation domain accounted for the second lowest total benchmark score points over the given 6-year period?
Show answer and explanation
Answer: (B) Semantic Analogy & Abstraction
Step-by-Step Total Points Calculation:
Let us calculate the 6-year aggregate score points for all 14 evaluation domains:
-
Symbolic Algebra & Proofs:
-
Semantic Analogy & Abstraction:
-
Multi-Hop Analytical Reasoning:
-
Algorithmic Arithmetic:
-
Contextual Reading Comprehension:
-
Tabular & Visual Data Interpretation:
-
Logical Data Sufficiency:
-
Cloze Context Fill-In:
-
Spatial & Computational Geometry:
-
Formal Mathematical Reasoning:
-
Advanced Modern Optimization:
-
Discrete Number Theory:
-
Discourse Coherence & Reordering:
-
Grammatical & Syntax Correction:
Ranking the lowest totals:
-
Lowest: Advanced Modern Optimization with 38 points.
-
Second lowest: Semantic Analogy & Abstraction with 51 points.
Hence, the domain accounting for the second lowest number of points is Semantic Analogy & Abstraction.
Question 7 · Moderate
Directions for Questions 5 to 8
Answer the questions on the basis of the information given below.
The EVAL-AI Longitudinal Frontier Model Benchmark Suite records the distribution of benchmark evaluation score points across 14 specialized cognitive domains for foundation models from 2018 to 2023. In each of these years, benchmark test batteries evaluated candidate frontier models across these 14 domains only. The formal benchmarking suite is executed once per calendar year.
| S. No. | Evaluation Domain | 2018 | 2019 | 2020 | 2021 | 2022 | 2023 |
|---|---|---|---|---|---|---|---|
| 1 | Symbolic Algebra & Proofs | 14 | 15 | 10 | 9 | 12 | 16 |
| 2 | Semantic Analogy & Abstraction | 7 | 6 | 14 | 6 | 11 | 7 |
| 3 | Multi-Hop Analytical Reasoning | 24 | 35 | 18 | 28 | 18 | 12 |
| 4 | Algorithmic Arithmetic | 6 | 13 | 12 | 10 | 6 | 15 |
| 5 | Contextual Reading Comprehension | 36 | 30 | 24 | 18 | 18 | 30 |
| 6 | Tabular & Visual Data Interpretation | 35 | 25 | 18 | 18 | 40 | 30 |
| 7 | Logical Data Sufficiency | 12 | 5 | 16 | 4 | 18 | 3 |
| 8 | Cloze Context Fill-In | 12 | 10 | 8 | 12 | 12 | 6 |
| 9 | Spatial & Computational Geometry | 10 | 14 | 6 | 18 | 8 | 11 |
| 10 | Formal Mathematical Reasoning | 30 | 18 | 36 | 20 | 12 | 12 |
| 11 | Advanced Modern Optimization | 8 | 6 | 14 | 5 | 2 | 3 |
| 12 | Discrete Number Theory | 10 | 9 | 9 | 14 | 11 | 8 |
| 13 | Discourse Coherence & Reordering | 10 | 9 | 2 | 12 | 6 | 24 |
| 14 | Grammatical & Syntax Correction | 10 | 6 | 18 | 9 | 10 | 8 |
Which year's evaluation battery had the maximum total number of benchmark test items (questions) during the given period?
Show answer and explanation
Answer: (D) Cannot be determined
Step-by-Step Reason:
The table gives the break-up of points allotted to each topic across the years. However, the information regarding the number of marks or points assigned per question (or test item) is not provided. Without knowing the point weightage per test item for each topic and each year, the total number of questions in each year's evaluation battery cannot be determined.
Question 8 · Moderate
Directions for Questions 5 to 8
Answer the questions on the basis of the information given below.
The EVAL-AI Longitudinal Frontier Model Benchmark Suite records the distribution of benchmark evaluation score points across 14 specialized cognitive domains for foundation models from 2018 to 2023. In each of these years, benchmark test batteries evaluated candidate frontier models across these 14 domains only. The formal benchmarking suite is executed once per calendar year.
| S. No. | Evaluation Domain | 2018 | 2019 | 2020 | 2021 | 2022 | 2023 |
|---|---|---|---|---|---|---|---|
| 1 | Symbolic Algebra & Proofs | 14 | 15 | 10 | 9 | 12 | 16 |
| 2 | Semantic Analogy & Abstraction | 7 | 6 | 14 | 6 | 11 | 7 |
| 3 | Multi-Hop Analytical Reasoning | 24 | 35 | 18 | 28 | 18 | 12 |
| 4 | Algorithmic Arithmetic | 6 | 13 | 12 | 10 | 6 | 15 |
| 5 | Contextual Reading Comprehension | 36 | 30 | 24 | 18 | 18 | 30 |
| 6 | Tabular & Visual Data Interpretation | 35 | 25 | 18 | 18 | 40 | 30 |
| 7 | Logical Data Sufficiency | 12 | 5 | 16 | 4 | 18 | 3 |
| 8 | Cloze Context Fill-In | 12 | 10 | 8 | 12 | 12 | 6 |
| 9 | Spatial & Computational Geometry | 10 | 14 | 6 | 18 | 8 | 11 |
| 10 | Formal Mathematical Reasoning | 30 | 18 | 36 | 20 | 12 | 12 |
| 11 | Advanced Modern Optimization | 8 | 6 | 14 | 5 | 2 | 3 |
| 12 | Discrete Number Theory | 10 | 9 | 9 | 14 | 11 | 8 |
| 13 | Discourse Coherence & Reordering | 10 | 9 | 2 | 12 | 6 | 24 |
| 14 | Grammatical & Syntax Correction | 10 | 6 | 18 | 9 | 10 | 8 |
How many of the evaluation domains witnessed positive and negative growth rates for 2020 and 2021 respectively (relative to their immediately preceding years)?
Show answer and explanation
Answer: (B) 5
Step-by-Step Growth Rate Evaluation:
We need to count how many topics experienced:
-
Positive growth in 2020 relative to 2019 (i.e., ) AND
-
Negative growth in 2021 relative to 2020 (i.e., ).
Let us inspect each topic across 2019 → 2020 → 2021:
-
Algebra: (Negative) → No.
-
Analogies: (+8, Positive), then (-8, Negative) → Yes (1)
-
Analytical Reasoning: (Negative) → No.
-
Arithmetic: (Negative) → No.
-
Comprehension: (Negative) → No.
-
Data Interpretation: (Negative) → No.
-
Data Sufficiency: (+11, Positive), then (-12, Negative) → Yes (2)
-
Cloze Fill-In: (Negative) → No.
-
Geometry: (Negative) → No.
-
Math Reasoning: (+18, Positive), then (-16, Negative) → Yes (3)
-
Modern Optimization: (+8, Positive), then (-9, Negative) → Yes (4)
-
Number Theory: (Zero growth) → No.
-
Discourse Coherence: (Negative) → No.
-
Syntax Correction: (+12, Positive), then (-9, Negative) → Yes (5)
There are exactly 5 evaluation domains that witnessed positive growth in 2020 followed by negative growth in 2021.
Question 9 · Moderate
Directions for Questions 9 to 12
Answer the questions on the basis of the information given below.
The tables below provide distribution statistics for electric vehicles (EVs) sold in a major automotive market in 2024 across five categories: Compact Hatch, Crossover, Fleet MPV, Executive Sedan, and Premium SUV.
Table 1: Brand-wise percentage distribution within each EV category
| Brand | Compact Hatch | Crossover | Fleet MPV | Executive Sedan | Premium SUV |
|---|---|---|---|---|---|
| Aether Motors | 24% | 20% | 45% | 15% | 42% |
| VoltEdge | 32% | 15% | 25% | 10% | 8% |
| Nexora Auto | 20% | 25% | 10% | 15% | 16% |
| Zenith EV | 16% | 28% | 12% | 35% | 10% |
| Apex Dynamics | 0% | 7% | 3% | 20% | 4% |
Table 2: Category-wise percentage distribution of sales for each brand
| Category | Aether Motors | VoltEdge | Nexora Auto | Zenith EV | Apex Dynamics |
|---|---|---|---|---|---|
| Compact Hatch | 25% | 48% | 35% | 17% | 0% |
| Crossover | 15% | 15% | 20% | 28% | 15% |
| Fleet MPV | 30% | 22% | 15% | 10% | 5% |
| Executive Sedan | 12% | 10% | 20% | 35% | 60% |
| Premium SUV | 18% | 5% | 10% | 10% | 20% |
Note: These five brands may not be the only brands selling cars in the given categories. Unlisted manufacturers may account for the remaining market share in any category.
If Nexora Auto sold 8,000 Crossover EVs in 2024, then the number of Premium SUVs sold by the brand that had the second highest share in the Premium SUV category could not be more than:
Show answer and explanation
Answer: (C) 5,000
Step-by-Step Calculation:
-
Calculate Nexora Auto's Premium SUV sales:
-
Nexora sold 8,000 Crossover EVs.
-
From Table 2, for Nexora: Crossover represents 20% of its total EV sales, while Premium SUV represents 10%.
-
Therefore:
-
-
Calculate Total Market Sales of Premium SUVs:
-
From Table 1, Nexora holds a 16% share of the entire Premium SUV category.
-
Therefore:
-
-
Analyze Shares in the Premium SUV Category:
-
From Table 1, the shares of the five listed brands are:
-
Aether Motors: ( units)
-
Nexora Auto: ( units)
-
Zenith EV: ( units)
-
VoltEdge: ( units)
-
Apex Dynamics: ( units)
-
-
Sum of the five listed brands .
-
The remaining share belonging to other unlisted manufacturers .
-
-
Determine the Maximum Possible Second Highest Share:
-
The highest share is held by Aether Motors at 42%.
-
Among the listed brands, the next highest share is Nexora at 16%.
-
If the entire unallocated 20% belongs to a single other brand, that brand would hold 20% of the market.
-
Since , that brand would occupy the second highest position with:
-
Any further fragmentation among outside brands would only decrease this value.
-
Hence, the number of Premium SUVs sold by the brand with the second highest share could not be more than 5,000.
Question 10 · Moderate
Directions for Questions 9 to 12
Answer the questions on the basis of the information given below.
The tables below provide distribution statistics for electric vehicles (EVs) sold in a major automotive market in 2024 across five categories: Compact Hatch, Crossover, Fleet MPV, Executive Sedan, and Premium SUV.
Table 1: Brand-wise percentage distribution within each EV category
| Brand | Compact Hatch | Crossover | Fleet MPV | Executive Sedan | Premium SUV |
|---|---|---|---|---|---|
| Aether Motors | 24% | 20% | 45% | 15% | 42% |
| VoltEdge | 32% | 15% | 25% | 10% | 8% |
| Nexora Auto | 20% | 25% | 10% | 15% | 16% |
| Zenith EV | 16% | 28% | 12% | 35% | 10% |
| Apex Dynamics | 0% | 7% | 3% | 20% | 4% |
Table 2: Category-wise percentage distribution of sales for each brand
| Category | Aether Motors | VoltEdge | Nexora Auto | Zenith EV | Apex Dynamics |
|---|---|---|---|---|---|
| Compact Hatch | 25% | 48% | 35% | 17% | 0% |
| Crossover | 15% | 15% | 20% | 28% | 15% |
| Fleet MPV | 30% | 22% | 15% | 10% | 5% |
| Executive Sedan | 12% | 10% | 20% | 35% | 60% |
| Premium SUV | 18% | 5% | 10% | 10% | 20% |
Note: These five brands may not be the only brands selling cars in the given categories. Unlisted manufacturers may account for the remaining market share in any category.
What was the ratio of the number of Zenith Executive Sedans sold to the total number of Crossover EVs sold in the country in 2024?
Show answer and explanation
Answer: (A) 7 : 20
Step-by-Step Derivation of Ratio:
Let the total EV sales of Zenith EV be .
-
Calculate Zenith Executive Sedan Sales:
-
From Table 2, Executive Sedans account for 35% of Zenith EV's total sales:
-
-
Calculate Zenith Crossover EV Sales:
-
From Table 2, Crossover EVs account for 28% of Zenith EV's total sales:
-
-
Calculate Total Crossover EVs Sold in the Market:
-
From Table 1, Zenith EV holds a 28% share of all Crossover EVs sold in the country:
-
-
Compute the Required Ratio:
Hence, the ratio is 7 : 20.
Question 11 · Moderate
Directions for Questions 9 to 12
Answer the questions on the basis of the information given below.
The tables below provide distribution statistics for electric vehicles (EVs) sold in a major automotive market in 2024 across five categories: Compact Hatch, Crossover, Fleet MPV, Executive Sedan, and Premium SUV.
Table 1: Brand-wise percentage distribution within each EV category
| Brand | Compact Hatch | Crossover | Fleet MPV | Executive Sedan | Premium SUV |
|---|---|---|---|---|---|
| Aether Motors | 24% | 20% | 45% | 15% | 42% |
| VoltEdge | 32% | 15% | 25% | 10% | 8% |
| Nexora Auto | 20% | 25% | 10% | 15% | 16% |
| Zenith EV | 16% | 28% | 12% | 35% | 10% |
| Apex Dynamics | 0% | 7% | 3% | 20% | 4% |
Table 2: Category-wise percentage distribution of sales for each brand
| Category | Aether Motors | VoltEdge | Nexora Auto | Zenith EV | Apex Dynamics |
|---|---|---|---|---|---|
| Compact Hatch | 25% | 48% | 35% | 17% | 0% |
| Crossover | 15% | 15% | 20% | 28% | 15% |
| Fleet MPV | 30% | 22% | 15% | 10% | 5% |
| Executive Sedan | 12% | 10% | 20% | 35% | 60% |
| Premium SUV | 18% | 5% | 10% | 10% | 20% |
Note: These five brands may not be the only brands selling cars in the given categories. Unlisted manufacturers may account for the remaining market share in any category.
If Apex Dynamics sold 30,000 EVs in 2024, what was the number of Executive Sedans sold by the brand that had the smallest share in that category?
Show answer and explanation
Answer: (D) Cannot be determined
Step-by-Step Analysis:
From Table 1, the listed market shares in the Executive Sedan category are:
-
Zenith EV: 35%
-
Apex Dynamics: 20%
-
Aether Motors: 15%
-
Nexora Auto: 15%
-
VoltEdge: 10%
-
Total of listed brands .
The remaining 5% is accounted for by other unlisted brands. This 5% share can be divided among any arbitrary number of smaller brands (e.g., ten different niche brands each having 0.5% share). Because the distribution and composition of these unlisted competitors is completely unknown, the exact sales of the brand holding the smallest share cannot be determined.
Question 12 · Moderate
Directions for Questions 9 to 12
Answer the questions on the basis of the information given below.
The tables below provide distribution statistics for electric vehicles (EVs) sold in a major automotive market in 2024 across five categories: Compact Hatch, Crossover, Fleet MPV, Executive Sedan, and Premium SUV.
Table 1: Brand-wise percentage distribution within each EV category
| Brand | Compact Hatch | Crossover | Fleet MPV | Executive Sedan | Premium SUV |
|---|---|---|---|---|---|
| Aether Motors | 24% | 20% | 45% | 15% | 42% |
| VoltEdge | 32% | 15% | 25% | 10% | 8% |
| Nexora Auto | 20% | 25% | 10% | 15% | 16% |
| Zenith EV | 16% | 28% | 12% | 35% | 10% |
| Apex Dynamics | 0% | 7% | 3% | 20% | 4% |
Table 2: Category-wise percentage distribution of sales for each brand
| Category | Aether Motors | VoltEdge | Nexora Auto | Zenith EV | Apex Dynamics |
|---|---|---|---|---|---|
| Compact Hatch | 25% | 48% | 35% | 17% | 0% |
| Crossover | 15% | 15% | 20% | 28% | 15% |
| Fleet MPV | 30% | 22% | 15% | 10% | 5% |
| Executive Sedan | 12% | 10% | 20% | 35% | 60% |
| Premium SUV | 18% | 5% | 10% | 10% | 20% |
Note: These five brands may not be the only brands selling cars in the given categories. Unlisted manufacturers may account for the remaining market share in any category.
The total revenue earned by VoltEdge from Compact Hatch EVs was what percentage of the revenue earned by Zenith EV from Executive Sedans?
Show answer and explanation
Answer: (D) Cannot be determined
Step-by-Step Economic Analysis:
The tables provide only the unit percentage distributions of vehicles across brands and categories. No information is given regarding the selling price, average revenue per unit, or ASP (average selling price) for any car category or brand.
Since revenue is a product of volume and unit price:
Without pricing data, the revenue earned by VoltEdge from Compact Hatch cannot be compared to the revenue earned by Zenith from Executive Sedans. Hence, the answer cannot be determined.
Question 13 · Moderate
Directions for Questions 13 to 16
Answer the questions on the basis of the information given below.
The table below provides census statistics related to total population, rural settlement proportion, overall literacy rate, and sex ratio across five sovereign administrative territories (Alpha, Beta, Gamma, Delta, and Epsilon) for the year 2024.
| Territory | Total Population (In Lakhs) | Rural Population (In %) | Literacy Rate (In %) | Sex Ratio (Females per 1,000 Males) |
|---|---|---|---|---|
| Alpha | 900 | 40% | 50% | 800 |
| Beta | 450 | 72% | 55% | 920 |
| Gamma | 480 | 55% | 48% | 960 |
| Delta | 360 | 65% | 40% | 950 |
| Epsilon | 700 | 25% | 60% | 980 |
In the rural region of Territory Alpha, all women (i.e. 110 Lakh) are literate and all men are illiterate. The literacy rate among urban men in Territory Alpha is at least:
Show answer and explanation
Answer: (C) 20%
Step-by-Step Optimization for Territory Alpha:
-
Calculate Demographic Totals for Alpha:
-
Total Population .
-
Rural Population .
-
Urban Population .
-
Overall Literacy Rate .
-
Sex ratio :
-
-
Given Rural Conditions:
-
All rural females () are literate.
-
All rural males are illiterate.
-
Therefore:
-
-
Determine Urban Literate Composition:
-
Total Literates in Alpha .
-
Rural Literates .
-
Total Urban Literates .
-
-
Minimize Literacy Rate Among Urban Males:
-
To minimize literate urban males, we maximize the number of literate urban females.
-
Maximum possible literate urban females (i.e., all urban females).
-
Minimum possible literate urban males .
-
Minimum literacy rate among urban males:
-
Hence, the literacy rate among urban men is at least 20%.
Question 14 · Moderate
Directions for Questions 13 to 16
Answer the questions on the basis of the information given below.
The table below provides census statistics related to total population, rural settlement proportion, overall literacy rate, and sex ratio across five sovereign administrative territories (Alpha, Beta, Gamma, Delta, and Epsilon) for the year 2024.
| Territory | Total Population (In Lakhs) | Rural Population (In %) | Literacy Rate (In %) | Sex Ratio (Females per 1,000 Males) |
|---|---|---|---|---|
| Alpha | 900 | 40% | 50% | 800 |
| Beta | 450 | 72% | 55% | 920 |
| Gamma | 480 | 55% | 48% | 960 |
| Delta | 360 | 65% | 40% | 950 |
| Epsilon | 700 | 25% | 60% | 980 |
If the literate population staying in urban areas of each territory is the maximum possible, in how many territories can the urban population be 100% literate?
Show answer and explanation
Answer: (C) 3
Step-by-Step Feasibility Analysis:
An urban population can be 100% literate if and only if the total literate population in the territory is at least equal to its total urban population:
where .
Let us check each territory:
-
Alpha: Urban % . Total Literacy Rate . Since , the urban population cannot be 100% literate.
-
Beta: Urban % . Total Literacy Rate . Since , the urban population can be 100% literate.
-
Gamma: Urban % . Total Literacy Rate . Since , the urban population can be 100% literate.
-
Delta: Urban % . Total Literacy Rate . Since , the urban population can be 100% literate.
-
Epsilon: Urban % . Total Literacy Rate . Since , the urban population cannot be 100% literate.
Thus, in exactly 3 territories (Beta, Gamma, and Delta), the urban population can be 100% literate.
Question 15 · Moderate
Directions for Questions 13 to 16
Answer the questions on the basis of the information given below.
The table below provides census statistics related to total population, rural settlement proportion, overall literacy rate, and sex ratio across five sovereign administrative territories (Alpha, Beta, Gamma, Delta, and Epsilon) for the year 2024.
| Territory | Total Population (In Lakhs) | Rural Population (In %) | Literacy Rate (In %) | Sex Ratio (Females per 1,000 Males) |
|---|---|---|---|---|
| Alpha | 900 | 40% | 50% | 800 |
| Beta | 450 | 72% | 55% | 920 |
| Gamma | 480 | 55% | 48% | 960 |
| Delta | 360 | 65% | 40% | 950 |
| Epsilon | 700 | 25% | 60% | 980 |
In each territory, 10% of the rural population migrates to the urban areas of the same territory. If this entire migrant population is illiterate, which territory will have the lowest literacy rate in its urban areas?
Show answer and explanation
Answer: (D) Cannot be determined
Step-by-Step Reason:
While the size of the migrant illiterate population ( of the rural population) can be computed for each territory, the baseline number of literate individuals originally residing in urban versus rural areas is completely unspecified.
Depending on how initial literates are distributed between rural and urban sectors in each territory, any of the territories could potentially have the lowest post-migration urban literacy rate. Therefore, the data is insufficient, and the answer cannot be determined.
Question 16 · Moderate
Directions for Questions 13 to 16
Answer the questions on the basis of the information given below.
The table below provides census statistics related to total population, rural settlement proportion, overall literacy rate, and sex ratio across five sovereign administrative territories (Alpha, Beta, Gamma, Delta, and Epsilon) for the year 2024.
| Territory | Total Population (In Lakhs) | Rural Population (In %) | Literacy Rate (In %) | Sex Ratio (Females per 1,000 Males) |
|---|---|---|---|---|
| Alpha | 900 | 40% | 50% | 800 |
| Beta | 450 | 72% | 55% | 920 |
| Gamma | 480 | 55% | 48% | 960 |
| Delta | 360 | 65% | 40% | 950 |
| Epsilon | 700 | 25% | 60% | 980 |
If 75% of the literate population of each territory lives in urban areas, then which territory has the lowest percentage of literacy in rural areas?
Show answer and explanation
Answer: (C) Delta
Step-by-Step Rural Literacy Comparison:
If 75% of the literate population of each territory lives in urban areas, then the remaining 25% of the literate population resides in rural areas.
For any territory:
Let us calculate this value for all five territories:
-
Alpha:
-
Beta:
-
Gamma:
-
Delta:
-
Epsilon:
Comparing the values, Delta has the lowest rural literacy rate at approximately 15.38%.
Question 17 · Moderate
Directions for Questions 17 to 20
Answer the questions on the basis of the information given below.
The tables below display the fare structure and the average daily passenger traffic for a regional express shuttle service connecting four terminal stations: A, B, C, and D.
Fare per passenger ($)
| Destination →↓ Source | A | B | C | D |
|---|---|---|---|---|
| A | - | 20 | 24 | 18 |
| B | 20 | - | 10 | 25 |
| C | 24 | 10 | - | 15 |
| D | 18 | 25 | 15 | - |
Average number of passengers per day
| Destination →↓ Source | A | B | C | D |
|---|---|---|---|---|
| A | - | 40 | 45 | 20 |
| B | 35 | - | 50 | 20 |
| C | 30 | 15 | - | 8 |
| D | 8 | 12 | 16 | - |
A commuter using the shuttle service can buy a ticket only between any two of the given stations, and tickets must be purchased at the boarding (source) station.
At which station is the daily fare collection the maximum?
Show answer and explanation
Answer: (A) Station A
Step-by-Step Calculation of Station Revenue:
Daily revenue collected at each station equals the sum of across all outbound routes originating from that station:
-
Station A:
-
Station B:
-
Station C:
-
Station D:
Comparing the revenues, the daily collection is maximum at Station A ($2,240).
Question 18 · Moderate
Directions for Questions 17 to 20
Answer the questions on the basis of the information given below.
The tables below display the fare structure and the average daily passenger traffic for a regional express shuttle service connecting four terminal stations: A, B, C, and D.
Fare per passenger ($)
| Destination →↓ Source | A | B | C | D |
|---|---|---|---|---|
| A | - | 20 | 24 | 18 |
| B | 20 | - | 10 | 25 |
| C | 24 | 10 | - | 15 |
| D | 18 | 25 | 15 | - |
Average number of passengers per day
| Destination →↓ Source | A | B | C | D |
|---|---|---|---|---|
| A | - | 40 | 45 | 20 |
| B | 35 | - | 50 | 20 |
| C | 30 | 15 | - | 8 |
| D | 8 | 12 | 16 | - |
A commuter using the shuttle service can buy a ticket only between any two of the given stations, and tickets must be purchased at the boarding (source) station.
What is the total daily collection (in $) on the route B–C–D–C–B?
Show answer and explanation
Answer: (C) $1,010
Step-by-Step Route Collection:
The circuit route B → C → D → C → B comprises four distinct directed transit legs:
-
Leg B → C: Fare = 10, Passengers = 50 → Revenue = 10 \times 50 = $500$
-
Leg C → D: Fare = 15, Passengers = 8 → Revenue = 15 \times 8 = $120$
-
Leg D → C: Fare = 15, Passengers = 16 → Revenue = 15 \times 16 = $240$
-
Leg C → B: Fare = 10, Passengers = 15 → Revenue = 10 \times 15 = $150$
Total Daily Route Collection:
Hence, the total daily collection along this route is $1,010.
Question 19 · Moderate
Directions for Questions 17 to 20
Answer the questions on the basis of the information given below.
The tables below display the fare structure and the average daily passenger traffic for a regional express shuttle service connecting four terminal stations: A, B, C, and D.
Fare per passenger ($)
| Destination →↓ Source | A | B | C | D |
|---|---|---|---|---|
| A | - | 20 | 24 | 18 |
| B | 20 | - | 10 | 25 |
| C | 24 | 10 | - | 15 |
| D | 18 | 25 | 15 | - |
Average number of passengers per day
| Destination →↓ Source | A | B | C | D |
|---|---|---|---|---|
| A | - | 40 | 45 | 20 |
| B | 35 | - | 50 | 20 |
| C | 30 | 15 | - | 8 |
| D | 8 | 12 | 16 | - |
A commuter using the shuttle service can buy a ticket only between any two of the given stations, and tickets must be purchased at the boarding (source) station.
If fare is charged at a standard rate of 0.50 per km, what is the length (in km) of the route BDAC?
Show answer and explanation
Answer: (C) 155 km
Step-by-Step Distance Calculation:
The distance of any leg is given by:
For route B–D–A–C, the legs are B–D, D–A, and A–C:
-
Leg B–D:
-
Fare = $25.
-
Charged at special rate of $0.50 per km:
-
-
Leg D–A:
-
Fare = $18.
-
Charged at standard rate of $0.40 per km:
-
-
Leg A–C:
-
Fare = $24.
-
Charged at standard rate of $0.40 per km:
-
Total Length of Route BDAC:
Hence, the total length is 155 km.
Question 20 · Moderate
Directions for Questions 17 to 20
Answer the questions on the basis of the information given below.
The tables below display the fare structure and the average daily passenger traffic for a regional express shuttle service connecting four terminal stations: A, B, C, and D.
Fare per passenger ($)
| Destination →↓ Source | A | B | C | D |
|---|---|---|---|---|
| A | - | 20 | 24 | 18 |
| B | 20 | - | 10 | 25 |
| C | 24 | 10 | - | 15 |
| D | 18 | 25 | 15 | - |
Average number of passengers per day
| Destination →↓ Source | A | B | C | D |
|---|---|---|---|---|
| A | - | 40 | 45 | 20 |
| B | 35 | - | 50 | 20 |
| C | 30 | 15 | - | 8 |
| D | 8 | 12 | 16 | - |
A commuter using the shuttle service can buy a ticket only between any two of the given stations, and tickets must be purchased at the boarding (source) station.
A revenue auditor residing in village C travels to villages A, B and D in that order on a regular basis. He travels to only one village each day and returns to village C at the end of the day. What were his total expenses on bus fare in September considering he does not travel on Sundays? (Given that July 31 was a Sunday and he travelled to village D on September 30.)
Show answer and explanation
Answer: (B) $834
Step-by-Step Travel Expense Schedule:
-
Determine Working Travel Days in September:
-
July 31 is a Sunday.
-
August has 31 days. Since , August 31 is a Wednesday.
-
September 1 is a Thursday.
-
The Sundays in September fall on the 4th, 11th, 18th, and 25th (4 Sundays).
-
September has 30 calendar days. Since the auditor does not travel on Sundays:
-
-
Understand the Travel Cycle:
-
The auditor resides in village C.
-
He visits villages in recurring cycle: A → B → D (period of 3 days), returning to C at the end of each travel day.
-
Round-trip fare for each destination from C:
-
To Village A:
-
To Village B:
-
To Village D:
-
-
Total cost of one complete 3-day cycle :
-
-
Align Schedule with September 30 (26th Travel Day):
-
The inspector travelled to village D on September 30 (the 26th travel day).
-
In the recurring sequence :
-
Day 26: Village D (Round-trip cost = $30).
-
Day 25: Village B (Round-trip cost = $20).
-
The first 24 travel days comprise exactly complete cycles of .
-
-
-
Calculate Aggregate Monthly Expense:
Hence, his total expenses on bus fare in September were $834.
Question 21 · Moderate
Directions for Questions 21 to 24
Answer the questions on the basis of the information given below.
The table below summarizes performance metrics across ten mutual fund investment schemes. All return metrics represent percentage annual returns over the specified holding windows.
| Scheme Name | Assets Under Management ($ Millions) | Return 1-Year (%) | Return 1-Year SIP (%) | Return 3-Year (%) | Best 1-Year Return (%) | Worst 1-Year Return (%) |
|---|---|---|---|---|---|---|
| Apex Alpha Fund | 1,250.0 | 92.5% | 62.0% | — | 185.0% | 90.0% |
| Vanguard Dynamic | 520.0 | 78.0% | 54.0% | 52.0% | 240.0% | –50.0% |
| Quantum Horizon | 680.0 | 72.0% | 48.0% | 58.0% | 225.0% | –45.0% |
| BlackRock Core Growth | 640.0 | 66.0% | 42.0% | 38.0% | 175.0% | –40.0% |
| Fidelity MegaCap | 1,800.0 | 65.0% | 36.0% | 34.0% | 210.0% | –35.0% |
| Citadel Dividend Plus | 460.0 | 60.0% | 30.0% | — | 150.0% | 62.0% |
| Bridgewater Emerging | 390.0 | 58.0% | 32.0% | 32.0% | 160.0% | –42.0% |
| Renaissance Vision | 720.0 | 56.0% | 28.0% | 55.0% | 220.0% | –50.0% |
| Morgan Stanley Equity | 1,050.0 | 54.0% | 30.0% | 40.0% | 190.0% | –38.0% |
| Goldman Top 200 | 630.0 | 52.0% | 30.0% | 38.0% | 160.0% | –36.0% |
According to statutory financial directives:
-
The scheme having the highest ratio of the spread () to its Assets Under Management receives the Gold Medal.
-
The second-highest ratio holder receives the Silver Medal.
-
The schemes having the worst two (lowest) ratios are barred from future market operations.
How many schemes are there with assets of more than $500 Million and the ratio of Best 1-Year return to Return 1-Year strictly greater than 2?
Show answer and explanation
Answer: (C) 7
Step-by-Step Verification:
We identify schemes satisfying two concurrent criteria:
Let us evaluate all ten schemes:
-
Apex Alpha Fund: AUM = 1,250 (> 500); (Not strictly > 2) → No
-
Vanguard Dynamic: AUM = 520 (> 500); → Yes (1)
-
Quantum Horizon: AUM = 680 (> 500); → Yes (2)
-
BlackRock Core Growth: AUM = 640 (> 500); → Yes (3)
-
Fidelity MegaCap: AUM = 1,800 (> 500); → Yes (4)
-
Citadel Dividend Plus: AUM = 460 (< 500) → No
-
Bridgewater Emerging: AUM = 390 (< 500) → No
-
Renaissance Vision: AUM = 720 (> 500); → Yes (5)
-
Morgan Stanley Equity: AUM = 1,050 (> 500); → Yes (6)
-
Goldman Top 200: AUM = 630 (> 500); → Yes (7)
There are exactly 7 schemes that meet both criteria.
Question 22 · Moderate
Directions for Questions 21 to 24
Answer the questions on the basis of the information given below.
The table below summarizes performance metrics across ten mutual fund investment schemes. All return metrics represent percentage annual returns over the specified holding windows.
| Scheme Name | Assets Under Management ($ Millions) | Return 1-Year (%) | Return 1-Year SIP (%) | Return 3-Year (%) | Best 1-Year Return (%) | Worst 1-Year Return (%) |
|---|---|---|---|---|---|---|
| Apex Alpha Fund | 1,250.0 | 92.5% | 62.0% | — | 185.0% | 90.0% |
| Vanguard Dynamic | 520.0 | 78.0% | 54.0% | 52.0% | 240.0% | –50.0% |
| Quantum Horizon | 680.0 | 72.0% | 48.0% | 58.0% | 225.0% | –45.0% |
| BlackRock Core Growth | 640.0 | 66.0% | 42.0% | 38.0% | 175.0% | –40.0% |
| Fidelity MegaCap | 1,800.0 | 65.0% | 36.0% | 34.0% | 210.0% | –35.0% |
| Citadel Dividend Plus | 460.0 | 60.0% | 30.0% | — | 150.0% | 62.0% |
| Bridgewater Emerging | 390.0 | 58.0% | 32.0% | 32.0% | 160.0% | –42.0% |
| Renaissance Vision | 720.0 | 56.0% | 28.0% | 55.0% | 220.0% | –50.0% |
| Morgan Stanley Equity | 1,050.0 | 54.0% | 30.0% | 40.0% | 190.0% | –38.0% |
| Goldman Top 200 | 630.0 | 52.0% | 30.0% | 38.0% | 160.0% | –36.0% |
According to statutory financial directives:
-
The scheme having the highest ratio of the spread () to its Assets Under Management receives the Gold Medal.
-
The second-highest ratio holder receives the Silver Medal.
-
The schemes having the worst two (lowest) ratios are barred from future market operations.
Based on statutory directives, which scheme will receive the Gold Medal?
Show answer and explanation
Answer: (A) Vanguard Dynamic
Step-by-Step Directive Ranking:
For each scheme, compute , and then the ratio :
-
Vanguard Dynamic:
-
Bridgewater Emerging:
-
Quantum Horizon:
-
Renaissance Vision:
-
BlackRock Core Growth:
-
Goldman Top 200:
-
Morgan Stanley Equity:
-
Citadel Dividend Plus:
-
Fidelity MegaCap:
-
Apex Alpha Fund:
Directive Conclusions:
-
Gold Medal (Rank 1): Vanguard Dynamic (0.5577)
-
Silver Medal (Rank 2): Bridgewater Emerging (0.5179)
-
Barred from Operations (Bottom 2): Apex Alpha Fund (0.0760) and Fidelity MegaCap (0.1361)
Question 23 · Moderate
Directions for Questions 21 to 24
Answer the questions on the basis of the information given below.
The table below summarizes performance metrics across ten mutual fund investment schemes. All return metrics represent percentage annual returns over the specified holding windows.
| Scheme Name | Assets Under Management ($ Millions) | Return 1-Year (%) | Return 1-Year SIP (%) | Return 3-Year (%) | Best 1-Year Return (%) | Worst 1-Year Return (%) |
|---|---|---|---|---|---|---|
| Apex Alpha Fund | 1,250.0 | 92.5% | 62.0% | — | 185.0% | 90.0% |
| Vanguard Dynamic | 520.0 | 78.0% | 54.0% | 52.0% | 240.0% | –50.0% |
| Quantum Horizon | 680.0 | 72.0% | 48.0% | 58.0% | 225.0% | –45.0% |
| BlackRock Core Growth | 640.0 | 66.0% | 42.0% | 38.0% | 175.0% | –40.0% |
| Fidelity MegaCap | 1,800.0 | 65.0% | 36.0% | 34.0% | 210.0% | –35.0% |
| Citadel Dividend Plus | 460.0 | 60.0% | 30.0% | — | 150.0% | 62.0% |
| Bridgewater Emerging | 390.0 | 58.0% | 32.0% | 32.0% | 160.0% | –42.0% |
| Renaissance Vision | 720.0 | 56.0% | 28.0% | 55.0% | 220.0% | –50.0% |
| Morgan Stanley Equity | 1,050.0 | 54.0% | 30.0% | 40.0% | 190.0% | –38.0% |
| Goldman Top 200 | 630.0 | 52.0% | 30.0% | 38.0% | 160.0% | –36.0% |
According to statutory financial directives:
-
The scheme having the highest ratio of the spread () to its Assets Under Management receives the Gold Medal.
-
The second-highest ratio holder receives the Silver Medal.
-
The schemes having the worst two (lowest) ratios are barred from future market operations.
Based on statutory directives, which scheme will receive the Silver Medal?
Show answer and explanation
Answer: (A) Bridgewater Emerging
Step-by-Step Directive Ranking:
For each scheme, compute , and then the ratio :
-
Vanguard Dynamic:
-
Bridgewater Emerging:
-
Quantum Horizon:
-
Renaissance Vision:
-
BlackRock Core Growth:
-
Goldman Top 200:
-
Morgan Stanley Equity:
-
Citadel Dividend Plus:
-
Fidelity MegaCap:
-
Apex Alpha Fund:
Directive Conclusions:
-
Gold Medal (Rank 1): Vanguard Dynamic (0.5577)
-
Silver Medal (Rank 2): Bridgewater Emerging (0.5179)
-
Barred from Operations (Bottom 2): Apex Alpha Fund (0.0760) and Fidelity MegaCap (0.1361)
Question 24 · Moderate
Directions for Questions 21 to 24
Answer the questions on the basis of the information given below.
The table below summarizes performance metrics across ten mutual fund investment schemes. All return metrics represent percentage annual returns over the specified holding windows.
| Scheme Name | Assets Under Management ($ Millions) | Return 1-Year (%) | Return 1-Year SIP (%) | Return 3-Year (%) | Best 1-Year Return (%) | Worst 1-Year Return (%) |
|---|---|---|---|---|---|---|
| Apex Alpha Fund | 1,250.0 | 92.5% | 62.0% | — | 185.0% | 90.0% |
| Vanguard Dynamic | 520.0 | 78.0% | 54.0% | 52.0% | 240.0% | –50.0% |
| Quantum Horizon | 680.0 | 72.0% | 48.0% | 58.0% | 225.0% | –45.0% |
| BlackRock Core Growth | 640.0 | 66.0% | 42.0% | 38.0% | 175.0% | –40.0% |
| Fidelity MegaCap | 1,800.0 | 65.0% | 36.0% | 34.0% | 210.0% | –35.0% |
| Citadel Dividend Plus | 460.0 | 60.0% | 30.0% | — | 150.0% | 62.0% |
| Bridgewater Emerging | 390.0 | 58.0% | 32.0% | 32.0% | 160.0% | –42.0% |
| Renaissance Vision | 720.0 | 56.0% | 28.0% | 55.0% | 220.0% | –50.0% |
| Morgan Stanley Equity | 1,050.0 | 54.0% | 30.0% | 40.0% | 190.0% | –38.0% |
| Goldman Top 200 | 630.0 | 52.0% | 30.0% | 38.0% | 160.0% | –36.0% |
According to statutory financial directives:
-
The scheme having the highest ratio of the spread () to its Assets Under Management receives the Gold Medal.
-
The second-highest ratio holder receives the Silver Medal.
-
The schemes having the worst two (lowest) ratios are barred from future market operations.
Based on statutory directives, which two schemes will be barred from future market operations?
Show answer and explanation
Answer: (A) Apex Alpha Fund and Fidelity MegaCap
Step-by-Step Directive Ranking:
For each scheme, compute , and then the ratio :
-
Vanguard Dynamic:
-
Bridgewater Emerging:
-
Quantum Horizon:
-
Renaissance Vision:
-
BlackRock Core Growth:
-
Goldman Top 200:
-
Morgan Stanley Equity:
-
Citadel Dividend Plus:
-
Fidelity MegaCap:
-
Apex Alpha Fund:
Directive Conclusions:
-
Gold Medal (Rank 1): Vanguard Dynamic (0.5577)
-
Silver Medal (Rank 2): Bridgewater Emerging (0.5179)
-
Barred from Operations (Bottom 2): Apex Alpha Fund (0.0760) and Fidelity MegaCap (0.1361)
Question 25 · Moderate
Directions for Questions 25 to 28
Answer the questions on the basis of the information given below.
Specialized aerospace brass alloys are synthesized by blending copper with zinc. The table below provides information regarding four distinct experimental alloy batches. The copper used in each alloy batch has a distinct quality, quantity, and unit procurement price, whereas the zinc utilized across all batches is of uniform aerospace grade priced at $180/kg.
In none of the four batches does the weight of zinc exceed the weight of copper (i.e., ).
| Alloy Batch | Weight of Copper (in kg) | Procurement Rate of Copper (in $/kg) | Weight of Zinc (in kg) | Unit Price of Alloy (in $/kg) |
|---|---|---|---|---|
| Alloy 1 | 16 | 90 | W | A |
| Alloy 2 | 20 | 60 | X | B |
| Alloy 3 | 24 | 90 | Y | C |
| Alloy 4 | 30 | 120 | Z | D |
The blended unit price of an alloy per kg is given by:
It is further known that W, X, Y, Z, A, B, C, and D are all natural numbers (positive integers).
How many values can B take?
Show answer and explanation
Answer: (C) 5
Step-by-Step Divisor Analysis for Alloy 2:
For Alloy 2:
-
Weight of Copper , Rate of Copper .
-
Rate of Zinc , Weight of Zinc .
-
Constraint: .
The unit price is given by:
For to be a natural number, must be an integer divisor of .
Since , the denominator must lie in the range .
Let us find all divisors of between and :
Thus, can take 5 distinct integer values, and consequently can take 5 distinct values ().
Question 26 · CAT Level
Directions for Questions 25 to 28
Answer the questions on the basis of the information given below.
Specialized aerospace brass alloys are synthesized by blending copper with zinc. The table below provides information regarding four distinct experimental alloy batches. The copper used in each alloy batch has a distinct quality, quantity, and unit procurement price, whereas the zinc utilized across all batches is of uniform aerospace grade priced at $180/kg.
In none of the four batches does the weight of zinc exceed the weight of copper (i.e., ).
| Alloy Batch | Weight of Copper (in kg) | Procurement Rate of Copper (in $/kg) | Weight of Zinc (in kg) | Unit Price of Alloy (in $/kg) |
|---|---|---|---|---|
| Alloy 1 | 16 | 90 | W | A |
| Alloy 2 | 20 | 60 | X | B |
| Alloy 3 | 24 | 90 | Y | C |
| Alloy 4 | 30 | 120 | Z | D |
The blended unit price of an alloy per kg is given by:
It is further known that W, X, Y, Z, A, B, C, and D are all natural numbers (positive integers).
Which of the following statement(s) is/are true?
i. 'A' is definitely less than 'D'
ii. Whenever 'W' is more than 'X', 'A' is definitely greater than 'B'
iii. 'B' and 'C' can be equal
iv. 'Z' can take 3 values
Show answer and explanation
Answer: (C) Only ii & iii
Step-by-Step Analysis of Statements:
First, let us tabulate all possible integer solutions for the four alloys:
-
Alloy 1 (W, A): Denominator divides in range :
-
Alloy 2 (X, B): Denominator divides in range :
-
Alloy 3 (Y, C): Denominator divides in range :
-
Alloy 4 (Z, D): Denominator divides in range :
Now let us evaluate the statements:
-
Statement i: 'A' is definitely less than 'D' → False. When , . When , . Thus can be equal to .
-
Statement ii: Whenever 'W' is more than 'X', 'A' is definitely greater than 'B' → True.
-
Possible values of : .
-
If , for , can be or . Here , while .
-
If , , while maximum possible .
-
If , , while maximum possible .
-
Thus, whenever , always holds.
-
-
Statement iii: 'B' and 'C' can be equal → True. Both and can take the values and .
-
Statement iv: 'Z' can take 3 values → False. can take 5 values ().
Hence, only ii & iii are true.
Question 27 · CAT Level
Directions for Questions 25 to 28
Answer the questions on the basis of the information given below.
Specialized aerospace brass alloys are synthesized by blending copper with zinc. The table below provides information regarding four distinct experimental alloy batches. The copper used in each alloy batch has a distinct quality, quantity, and unit procurement price, whereas the zinc utilized across all batches is of uniform aerospace grade priced at $180/kg.
In none of the four batches does the weight of zinc exceed the weight of copper (i.e., ).
| Alloy Batch | Weight of Copper (in kg) | Procurement Rate of Copper (in $/kg) | Weight of Zinc (in kg) | Unit Price of Alloy (in $/kg) |
|---|---|---|---|---|
| Alloy 1 | 16 | 90 | W | A |
| Alloy 2 | 20 | 60 | X | B |
| Alloy 3 | 24 | 90 | Y | C |
| Alloy 4 | 30 | 120 | Z | D |
The blended unit price of an alloy per kg is given by:
It is further known that W, X, Y, Z, A, B, C, and D are all natural numbers (positive integers).
If equal weights of Alloy 1 and Alloy 2 are melted together to form a new alloy, then which of the following is not a possible price of the new alloy (in $/kg)?
Show answer and explanation
Answer: (D) 112
Step-by-Step Analysis of Blended Price:
When equal weights of Alloy 1 and Alloy 2 are melted together, the resulting price is the arithmetic mean:
Possible values of :
Possible values of :
Let us test the options:
-
**\frac{100 + 80}{2} = 90$ → Possible
-
**\frac{120 + 84}{2} = 102$ → Possible
-
**\frac{108 + 120}{2} = 114$ → Possible
-
**112A + B = 224A + B$:
-
For : must be (No)
-
For : must be (No)
-
For : must be (No)
-
For : must be (No)
-
For : must be (No)
No combination produces an average price of .
-
Hence, $112/kg is not a possible price of the new alloy.
Question 28 · CAT Level
Directions for Questions 25 to 28
Answer the questions on the basis of the information given below.
Specialized aerospace brass alloys are synthesized by blending copper with zinc. The table below provides information regarding four distinct experimental alloy batches. The copper used in each alloy batch has a distinct quality, quantity, and unit procurement price, whereas the zinc utilized across all batches is of uniform aerospace grade priced at $180/kg.
In none of the four batches does the weight of zinc exceed the weight of copper (i.e., ).
| Alloy Batch | Weight of Copper (in kg) | Procurement Rate of Copper (in $/kg) | Weight of Zinc (in kg) | Unit Price of Alloy (in $/kg) |
|---|---|---|---|---|
| Alloy 1 | 16 | 90 | W | A |
| Alloy 2 | 20 | 60 | X | B |
| Alloy 3 | 24 | 90 | Y | C |
| Alloy 4 | 30 | 120 | Z | D |
The blended unit price of an alloy per kg is given by:
It is further known that W, X, Y, Z, A, B, C, and D are all natural numbers (positive integers).
Which of the following value(s) is/are possible for more than one out of A, B, C and D?
Show answer and explanation
Answer: (D) Both (1) and (2)
Step-by-Step Multi-Alloy Price Overlap:
Let us inspect the possible values taken by each rate:
-
Rate A:
-
Rate B:
-
Rate C:
-
Rate D:
Checking the numbers:
-
120: Appears in A, B, and C → possible for more than one alloy!
-
135: Appears in A, C, and D → possible for more than one alloy!
-
140: Appears only in D → not possible for more than one alloy.
Therefore, both 120 and 135 are possible for more than one out of A, B, C, and D.
Question 29 · CAT Level
Directions for Questions 29 to 32
Answer the questions on the basis of the information given below.
The table below gives the enrollment numbers across six consecutive academic cohorts (Year 1 to Year 6) of an engineering academy for the academic years 2016 and 2017.
| Academic Cohort | Students in the Year 2016 | Students in the Year 2017 |
|---|---|---|
| Year 1 | 120 | 150 |
| Year 2 | 90 | 100 |
| Year 3 | 80 | 78 |
| Year 4 | 70 | 68 |
| Year 5 | 55 | 62 |
| Year 6 | 40 | 54 |
It is also known that:
i. New students join the academy only in Year 1.
ii. No student drops out or leaves the academy before graduating from Year 6.
iii. Students who fail in a cohort in any year repeat and study in the same cohort the next year.
What was the maximum possible number of students who joined the academy in 2017?
Show answer and explanation
Answer: (C) 97
Step-by-Step Recursive Deduction:
Let the number of new students who joined the academy in Year 1 in 2017 be .
-
In Year 1 in 2017, the 150 students consist of the new entrants plus repeating students who failed Year 1 in 2016:
-
In Year 2 in 2017, the 100 students consist of students promoted from Year 1 () plus repeaters who failed Year 2 in 2016:
-
In Year 3 in 2017:
-
In Year 4 in 2017:
-
In Year 5 in 2017:
-
In Year 6 in 2017:
Establishing Feasible Bounds on :
For all failure counts and pass counts to be non-negative:
-
From failed counts:
-
From passed counts:
Thus, the feasible range for new entrants is:
The maximum possible number of students who joined the academy in 2017 is 97.
Question 30 · CAT Level
Directions for Questions 29 to 32
Answer the questions on the basis of the information given below.
The table below gives the enrollment numbers across six consecutive academic cohorts (Year 1 to Year 6) of an engineering academy for the academic years 2016 and 2017.
| Academic Cohort | Students in the Year 2016 | Students in the Year 2017 |
|---|---|---|
| Year 1 | 120 | 150 |
| Year 2 | 90 | 100 |
| Year 3 | 80 | 78 |
| Year 4 | 70 | 68 |
| Year 5 | 55 | 62 |
| Year 6 | 40 | 54 |
It is also known that:
i. New students join the academy only in Year 1.
ii. No student drops out or leaves the academy before graduating from Year 6.
iii. Students who fail in a cohort in any year repeat and study in the same cohort the next year.
In 2016, which of the following was not a possible pass percentage of Year 2?
Show answer and explanation
Answer: (A) 65.0%
Step-by-Step Pass Percentage Range for Year 2:
From our general equations:
-
Total students in Year 2 in 2016 .
-
Number of students who passed Year 2 in 2016 .
-
Feasible range of : .
-
Minimum Passed Students:
-
Maximum Passed Students:
Thus, the pass percentage of Year 2 must lie strictly in the range .
Any percentage outside this interval, such as 65.0%, was not possible.
Question 31 · CAT Level
Directions for Questions 29 to 32
Answer the questions on the basis of the information given below.
The table below gives the enrollment numbers across six consecutive academic cohorts (Year 1 to Year 6) of an engineering academy for the academic years 2016 and 2017.
| Academic Cohort | Students in the Year 2016 | Students in the Year 2017 |
|---|---|---|
| Year 1 | 120 | 150 |
| Year 2 | 90 | 100 |
| Year 3 | 80 | 78 |
| Year 4 | 70 | 68 |
| Year 5 | 55 | 62 |
| Year 6 | 40 | 54 |
It is also known that:
i. New students join the academy only in Year 1.
ii. No student drops out or leaves the academy before graduating from Year 6.
iii. Students who fail in a cohort in any year repeat and study in the same cohort the next year.
In 2016, if the number of students who passed in Year 2 was strictly more than the number of students who failed in Year 5, then what was the minimum pass percentage of Year 4?
Show answer and explanation
Answer: (B) 48.57%
Step-by-Step Conditional Optimization:
We are given:
Substituting our expressions in terms of :
Since must be an integer:
Now, for Year 4 in 2016:
-
Total students .
-
Number of students who passed .
-
For the minimum pass percentage, we use the smallest valid :
Hence, the minimum pass percentage of Year 4 was 48.57%.
Question 32 · CAT Level
Directions for Questions 29 to 32
Answer the questions on the basis of the information given below.
The table below gives the enrollment numbers across six consecutive academic cohorts (Year 1 to Year 6) of an engineering academy for the academic years 2016 and 2017.
| Academic Cohort | Students in the Year 2016 | Students in the Year 2017 |
|---|---|---|
| Year 1 | 120 | 150 |
| Year 2 | 90 | 100 |
| Year 3 | 80 | 78 |
| Year 4 | 70 | 68 |
| Year 5 | 55 | 62 |
| Year 6 | 40 | 54 |
It is also known that:
i. New students join the academy only in Year 1.
ii. No student drops out or leaves the academy before graduating from Year 6.
iii. Students who fail in a cohort in any year repeat and study in the same cohort the next year.
In 2016, if the pass percentage in Year 5 was 60%, then what was the pass percentage of Year 1?
Show answer and explanation
Answer: (B) 38.33%
Step-by-Step Calculation:
We are given that in 2016, the pass percentage in Year 5 was 60%:
-
Total students in Year 5 in 2016 .
-
Number of students who passed .
From our algebraic deduction:
Now, determine the pass percentage of Year 1 in 2016:
-
Total students in Year 1 in 2016 .
-
Number of students who passed .
-
Pass percentage:
Hence, the pass percentage of Year 1 was 38.33%.
Question 33 · CAT Level
Directions for Questions 33 to 36
Answer the questions on the basis of the information given below.
The table below gives the marks scored by six candidates of an engineering institute in four core technical subjects: Digital systems, Analog systems, Power electronics, and Microprocessors. Each subject is assigned an academic credit weightage, shown in brackets alongside the subject name.
| Candidate | Digital Systems (Credit: 4) | Analog Systems (Credit: 2) | Power Electronics (Credit: 3) | Microprocessors (Credit: 6) |
|---|---|---|---|---|
| Arihant | 78 | 35 | 64 | 72 |
| Gopal | 68 | 66 | 82 | 52 |
| Nitin | 76 | 62 | 78 | 59 |
| Saurabh | 32 | 48 | 48 | 79 |
| Prabhakar | 56 | 63 | 63 | 48 |
| Gaurav | 43 | 47 | 93 | 45 |
The grade points corresponding to marks scored in any subject are allocated as follows:
| Marks Interval ($M$) | Grade | Grade Points |
|---|---|---|
| $M \ge 80$ | A | 5 |
| $65 \le M < 80$ | B | 4 |
| $50 \le M < 65$ | C | 3 |
| $40 \le M < 50$ | D | 2 |
| $M < 40$ | E | 1 |
The Cumulative Grade Point Average (CGPA) of a candidate across the four subjects is computed as:
The names of the two students who got the same CGPA are:
Show answer and explanation
Answer: (B) Gaurav and Prabhakar
Step-by-Step Grade Point and CGPA Deductions:
Total academic credits .
Let us determine the grade points and CGPA for each candidate:
-
Arihant:
-
Digital Systems: 78 → Grade B (4 pts)
-
Analog Systems: 35 → Grade E (1 pt)
-
Power Electronics: 64 → Grade C (3 pts)
-
Microprocessors: 72 → Grade B (4 pts)
-
-
Gopal:
-
Digital Systems: 68 → Grade B (4 pts)
-
Analog Systems: 66 → Grade B (4 pts)
-
Power Electronics: 82 → Grade A (5 pts)
-
Microprocessors: 52 → Grade C (3 pts)
-
-
Nitin:
-
Digital Systems: 76 → Grade B (4 pts)
-
Analog Systems: 62 → Grade C (3 pts)
-
Power Electronics: 78 → Grade B (4 pts)
-
Microprocessors: 59 → Grade C (3 pts)
-
-
Saurabh:
-
Digital Systems: 32 → Grade E (1 pt)
-
Analog Systems: 48 → Grade D (2 pts)
-
Power Electronics: 48 → Grade D (2 pts)
-
Microprocessors: 79 → Grade B (4 pts)
-
-
Prabhakar:
-
Digital Systems: 56 → Grade C (3 pts)
-
Analog Systems: 63 → Grade C (3 pts)
-
Power Electronics: 63 → Grade C (3 pts)
-
Microprocessors: 48 → Grade D (2 pts)
-
-
Gaurav:
-
Digital Systems: 43 → Grade D (2 pts)
-
Analog Systems: 47 → Grade D (2 pts)
-
Power Electronics: 93 → Grade A (5 pts)
-
Microprocessors: 45 → Grade D (2 pts)
-
Observations:
-
Same CGPA: Gaurav and Prabhakar both achieved a CGPA of 2.600.
-
Highest CGPA: Gopal achieved the highest CGPA (3.800 with 57 weighted points).
-
Gaurav's CGPA: Exactly 2.60.
Question 34 · CAT Level
Directions for Questions 33 to 36
Answer the questions on the basis of the information given below.
The table below gives the marks scored by six candidates of an engineering institute in four core technical subjects: Digital systems, Analog systems, Power electronics, and Microprocessors. Each subject is assigned an academic credit weightage, shown in brackets alongside the subject name.
| Candidate | Digital Systems (Credit: 4) | Analog Systems (Credit: 2) | Power Electronics (Credit: 3) | Microprocessors (Credit: 6) |
|---|---|---|---|---|
| Arihant | 78 | 35 | 64 | 72 |
| Gopal | 68 | 66 | 82 | 52 |
| Nitin | 76 | 62 | 78 | 59 |
| Saurabh | 32 | 48 | 48 | 79 |
| Prabhakar | 56 | 63 | 63 | 48 |
| Gaurav | 43 | 47 | 93 | 45 |
The grade points corresponding to marks scored in any subject are allocated as follows:
| Marks Interval ($M$) | Grade | Grade Points |
|---|---|---|
| $M \ge 80$ | A | 5 |
| $65 \le M < 80$ | B | 4 |
| $50 \le M < 65$ | C | 3 |
| $40 \le M < 50$ | D | 2 |
| $M < 40$ | E | 1 |
The Cumulative Grade Point Average (CGPA) of a candidate across the four subjects is computed as:
Who got the highest CGPA?
Show answer and explanation
Answer: (C) Gopal
Step-by-Step Grade Point and CGPA Deductions:
Total academic credits .
Let us determine the grade points and CGPA for each candidate:
-
Arihant:
-
Digital Systems: 78 → Grade B (4 pts)
-
Analog Systems: 35 → Grade E (1 pt)
-
Power Electronics: 64 → Grade C (3 pts)
-
Microprocessors: 72 → Grade B (4 pts)
-
-
Gopal:
-
Digital Systems: 68 → Grade B (4 pts)
-
Analog Systems: 66 → Grade B (4 pts)
-
Power Electronics: 82 → Grade A (5 pts)
-
Microprocessors: 52 → Grade C (3 pts)
-
-
Nitin:
-
Digital Systems: 76 → Grade B (4 pts)
-
Analog Systems: 62 → Grade C (3 pts)
-
Power Electronics: 78 → Grade B (4 pts)
-
Microprocessors: 59 → Grade C (3 pts)
-
-
Saurabh:
-
Digital Systems: 32 → Grade E (1 pt)
-
Analog Systems: 48 → Grade D (2 pts)
-
Power Electronics: 48 → Grade D (2 pts)
-
Microprocessors: 79 → Grade B (4 pts)
-
-
Prabhakar:
-
Digital Systems: 56 → Grade C (3 pts)
-
Analog Systems: 63 → Grade C (3 pts)
-
Power Electronics: 63 → Grade C (3 pts)
-
Microprocessors: 48 → Grade D (2 pts)
-
-
Gaurav:
-
Digital Systems: 43 → Grade D (2 pts)
-
Analog Systems: 47 → Grade D (2 pts)
-
Power Electronics: 93 → Grade A (5 pts)
-
Microprocessors: 45 → Grade D (2 pts)
-
Observations:
-
Same CGPA: Gaurav and Prabhakar both achieved a CGPA of 2.600.
-
Highest CGPA: Gopal achieved the highest CGPA (3.800 with 57 weighted points).
-
Gaurav's CGPA: Exactly 2.60.
Question 35 · CAT Level
Directions for Questions 33 to 36
Answer the questions on the basis of the information given below.
The table below gives the marks scored by six candidates of an engineering institute in four core technical subjects: Digital systems, Analog systems, Power electronics, and Microprocessors. Each subject is assigned an academic credit weightage, shown in brackets alongside the subject name.
| Candidate | Digital Systems (Credit: 4) | Analog Systems (Credit: 2) | Power Electronics (Credit: 3) | Microprocessors (Credit: 6) |
|---|---|---|---|---|
| Arihant | 78 | 35 | 64 | 72 |
| Gopal | 68 | 66 | 82 | 52 |
| Nitin | 76 | 62 | 78 | 59 |
| Saurabh | 32 | 48 | 48 | 79 |
| Prabhakar | 56 | 63 | 63 | 48 |
| Gaurav | 43 | 47 | 93 | 45 |
The grade points corresponding to marks scored in any subject are allocated as follows:
| Marks Interval ($M$) | Grade | Grade Points |
|---|---|---|
| $M \ge 80$ | A | 5 |
| $65 \le M < 80$ | B | 4 |
| $50 \le M < 65$ | C | 3 |
| $40 \le M < 50$ | D | 2 |
| $M < 40$ | E | 1 |
The Cumulative Grade Point Average (CGPA) of a candidate across the four subjects is computed as:
Except the student who got the highest CGPA among these six students, everybody applied for rechecking and each one of them got their marks increased in one or more subjects. One of them got 'k' more marks in total, after rechecking, and his CGPA became the highest. What is the smallest possible value of k?
Show answer and explanation
Answer: (A) 3
Step-by-Step Optimization for Rechecking:
Gopal currently has the highest CGPA with a weighted sum of 57 points (CGPA = 3.800).
For any other candidate's CGPA to strictly become the highest, their new weighted sum must be at least 58 points.
Let us analyze the minimum marks required for each candidate to reach 58 points:
-
Arihant (Current Weighted Sum = 51):
-
Deficit .
-
Current marks: Digital Systems = 78 (Grade B, 4 pts), Power Electronics = 64 (Grade C, 3 pts).
-
If Arihant gains +2 marks in Digital Systems (78 → 80): grade increases to A (5 pts), adding weighted points.
-
If Arihant gains +1 mark in Power Electronics (64 → 65): grade increases to B (4 pts), adding weighted points.
-
Combined increase in weighted points points!
-
Total new weighted sum points (CGPA = ).
-
Total additional marks required .
-
-
Nitin (Current Weighted Sum = 52):
-
Deficit .
-
To gain 6 weighted points in Microprocessors (Credit 6), Nitin must move from 59 to 65 (+6 marks).
-
Alternatively, +4 marks in Digital Systems (76 → 80, +4 pts) and +2 marks in Power Electronics (78 → 80, +3 pts) requires .
-
-
Other candidates have much larger deficits ( to weighted points) requiring far more marks.
Hence, the smallest possible value of is 3.
Question 36 · CAT Level
Directions for Questions 33 to 36
Answer the questions on the basis of the information given below.
The table below gives the marks scored by six candidates of an engineering institute in four core technical subjects: Digital systems, Analog systems, Power electronics, and Microprocessors. Each subject is assigned an academic credit weightage, shown in brackets alongside the subject name.
| Candidate | Digital Systems (Credit: 4) | Analog Systems (Credit: 2) | Power Electronics (Credit: 3) | Microprocessors (Credit: 6) |
|---|---|---|---|---|
| Arihant | 78 | 35 | 64 | 72 |
| Gopal | 68 | 66 | 82 | 52 |
| Nitin | 76 | 62 | 78 | 59 |
| Saurabh | 32 | 48 | 48 | 79 |
| Prabhakar | 56 | 63 | 63 | 48 |
| Gaurav | 43 | 47 | 93 | 45 |
The grade points corresponding to marks scored in any subject are allocated as follows:
| Marks Interval ($M$) | Grade | Grade Points |
|---|---|---|
| $M \ge 80$ | A | 5 |
| $65 \le M < 80$ | B | 4 |
| $50 \le M < 65$ | C | 3 |
| $40 \le M < 50$ | D | 2 |
| $M < 40$ | E | 1 |
The Cumulative Grade Point Average (CGPA) of a candidate across the four subjects is computed as:
What was the CGPA of Gaurav?
Show answer and explanation
Answer: (B) 2.60
Step-by-Step Grade Point and CGPA Deductions:
Total academic credits .
Let us determine the grade points and CGPA for each candidate:
-
Arihant:
-
Digital Systems: 78 → Grade B (4 pts)
-
Analog Systems: 35 → Grade E (1 pt)
-
Power Electronics: 64 → Grade C (3 pts)
-
Microprocessors: 72 → Grade B (4 pts)
-
-
Gopal:
-
Digital Systems: 68 → Grade B (4 pts)
-
Analog Systems: 66 → Grade B (4 pts)
-
Power Electronics: 82 → Grade A (5 pts)
-
Microprocessors: 52 → Grade C (3 pts)
-
-
Nitin:
-
Digital Systems: 76 → Grade B (4 pts)
-
Analog Systems: 62 → Grade C (3 pts)
-
Power Electronics: 78 → Grade B (4 pts)
-
Microprocessors: 59 → Grade C (3 pts)
-
-
Saurabh:
-
Digital Systems: 32 → Grade E (1 pt)
-
Analog Systems: 48 → Grade D (2 pts)
-
Power Electronics: 48 → Grade D (2 pts)
-
Microprocessors: 79 → Grade B (4 pts)
-
-
Prabhakar:
-
Digital Systems: 56 → Grade C (3 pts)
-
Analog Systems: 63 → Grade C (3 pts)
-
Power Electronics: 63 → Grade C (3 pts)
-
Microprocessors: 48 → Grade D (2 pts)
-
-
Gaurav:
-
Digital Systems: 43 → Grade D (2 pts)
-
Analog Systems: 47 → Grade D (2 pts)
-
Power Electronics: 93 → Grade A (5 pts)
-
Microprocessors: 45 → Grade D (2 pts)
-
Observations:
-
Same CGPA: Gaurav and Prabhakar both achieved a CGPA of 2.600.
-
Highest CGPA: Gopal achieved the highest CGPA (3.800 with 57 weighted points).
-
Gaurav's CGPA: Exactly 2.60.
Question 37 · CAT Level
Directions for Questions 37 to 40
Answer the questions on the basis of the information given below.
A numismatic collector has a collection of 100 coins minted across six specialized metals: Platinum, Gold, Silver, Bronze, Copper, and Aluminium.
The denominations of Platinum and Gold coins are multiples of 25 paise, while the denominations of coins made of the other four metals are multiples of 5 paise.
The denomination boundaries and the percentage breakdown of the 100 coins are provided below:
| Variety | Range of Denominations (in Paise) | Number of Coins (% of Total) |
|---|---|---|
| Platinum | (200, 500] | 6% |
| Gold | [100, 200] | 14% |
| Silver | [75, 100) | 20% |
| Bronze | [50, 75) | 20% |
| Copper | [25, 50) | 28% |
| Aluminium | [1, 25) | 12% |
Note: denotes all numbers from inclusive to exclusive. Multiples of 25 paise or 5 paise within each interval determine valid coin denominations.
The total value of silver and bronze coins can exceed the value of platinum and gold coins by at most:
Show answer and explanation
Answer: (C) 550 paise
Step-by-Step Optimization of Value Difference:
Number of coins of each variety (out of 100):
-
Platinum (Multiples of 25 in : )
-
Gold (Multiples of 25 in : )
-
Silver (Multiples of 5 in : )
-
Bronze (Multiples of 5 in : )
To maximize :
-
Maximize Silver and Bronze:
-
Each Silver coin takes its maximum denomination .
-
Each Bronze coin takes its maximum denomination .
-
Maximum Silver + Bronze .
-
-
Minimize Platinum and Gold:
-
Each Platinum coin takes its minimum denomination .
-
Each Gold coin takes its minimum denomination .
-
Minimum Platinum + Gold .
-
-
Maximum Excess:
Hence, the total value can exceed by at most 550 paise.
Question 38 · CAT Level
Directions for Questions 37 to 40
Answer the questions on the basis of the information given below.
A numismatic collector has a collection of 100 coins minted across six specialized metals: Platinum, Gold, Silver, Bronze, Copper, and Aluminium.
The denominations of Platinum and Gold coins are multiples of 25 paise, while the denominations of coins made of the other four metals are multiples of 5 paise.
The denomination boundaries and the percentage breakdown of the 100 coins are provided below:
| Variety | Range of Denominations (in Paise) | Number of Coins (% of Total) |
|---|---|---|
| Platinum | (200, 500] | 6% |
| Gold | [100, 200] | 14% |
| Silver | [75, 100) | 20% |
| Bronze | [50, 75) | 20% |
| Copper | [25, 50) | 28% |
| Aluminium | [1, 25) | 12% |
Note: denotes all numbers from inclusive to exclusive. Multiples of 25 paise or 5 paise within each interval determine valid coin denominations.
The collector had at least one copper coin each of all possible denominations, and the total value of all these copper coins was Rs. 11.20. What is the maximum number of 45 paise copper coins that he could have?
Show answer and explanation
Answer: (C) 19
Step-by-Step Diophantine Optimization:
-
Total copper coins .
-
Denominations are multiples of 5 paise in : .
-
At least one coin of each of the 5 denominations is present ().
-
Total value .
-
Sum of counts: .
To maximize , we make the other counts as small as possible while satisfying the aggregate value of 1,120 paise.
Let us test :
-
.
-
Remaining coins .
-
Remaining value .
-
Testing valid counts for the remaining 9 coins with :
-
Choose , , , :
-
Check coin sum: coins.
-
Check value: !
-
-
Both constraints are satisfied exactly.
-
If :
- Remaining 8 coins with minimum values would yield . . But increasing denominations requires at least , yielding (infeasible).
Hence, the maximum possible number of 45 paise copper coins is 19.
Question 39 · CAT Level
Directions for Questions 37 to 40
Answer the questions on the basis of the information given below.
A numismatic collector has a collection of 100 coins minted across six specialized metals: Platinum, Gold, Silver, Bronze, Copper, and Aluminium.
The denominations of Platinum and Gold coins are multiples of 25 paise, while the denominations of coins made of the other four metals are multiples of 5 paise.
The denomination boundaries and the percentage breakdown of the 100 coins are provided below:
| Variety | Range of Denominations (in Paise) | Number of Coins (% of Total) |
|---|---|---|
| Platinum | (200, 500] | 6% |
| Gold | [100, 200] | 14% |
| Silver | [75, 100) | 20% |
| Bronze | [50, 75) | 20% |
| Copper | [25, 50) | 28% |
| Aluminium | [1, 25) | 12% |
Note: denotes all numbers from inclusive to exclusive. Multiples of 25 paise or 5 paise within each interval determine valid coin denominations.
If the authorities permit the circulation of only those coins whose denomination is an integer multiple of 25 paise, what is the maximum value of coins that the collector can use in the market?
Show answer and explanation
Answer: (C) Rs. 90
Step-by-Step Identification of Usable Coins:
Only coins whose denomination is a multiple of 25 paise can be used in the market:
-
Platinum (6 coins): Range . Multiples of 25.
-
Maximum denomination .
-
Max value .
-
-
Gold (14 coins): Range . Multiples of 25.
-
Maximum denomination .
-
Max value .
-
-
Silver (20 coins): Range . Multiples of 5: .
-
Only 75 paise is a multiple of 25.
-
Max value .
-
-
Bronze (20 coins): Range . Multiples of 5: .
-
Only 50 paise is a multiple of 25.
-
Max value .
-
-
Copper (28 coins): Range . Multiples of 5: .
-
Only 25 paise is a multiple of 25.
-
Max value .
-
-
Aluminium (12 coins): Range . Multiples of 5: .
- No denomination is a multiple of 25 → Value .
Total Maximum Usable Value:
Hence, the maximum value is Rs. 90.
Question 40 · CAT Level
Directions for Questions 37 to 40
Answer the questions on the basis of the information given below.
A numismatic collector has a collection of 100 coins minted across six specialized metals: Platinum, Gold, Silver, Bronze, Copper, and Aluminium.
The denominations of Platinum and Gold coins are multiples of 25 paise, while the denominations of coins made of the other four metals are multiples of 5 paise.
The denomination boundaries and the percentage breakdown of the 100 coins are provided below:
| Variety | Range of Denominations (in Paise) | Number of Coins (% of Total) |
|---|---|---|
| Platinum | (200, 500] | 6% |
| Gold | [100, 200] | 14% |
| Silver | [75, 100) | 20% |
| Bronze | [50, 75) | 20% |
| Copper | [25, 50) | 28% |
| Aluminium | [1, 25) | 12% |
Note: denotes all numbers from inclusive to exclusive. Multiples of 25 paise or 5 paise within each interval determine valid coin denominations.
What is the maximum number of coins of denominations lying between 25 and 50 paise, both inclusive, in the collection?
Show answer and explanation
Answer: (C) 48
Step-by-Step Range Count:
We need the maximum number of coins whose denominations lie in the interval paise, both endpoints inclusive.
Let us check each variety:
-
Aluminium: Denominations lie in . None are . → 0 coins.
-
Copper: Denominations lie in . All 28 copper coins lie in . → 28 coins.
-
Bronze: Denominations lie in . The denomination 50 paise lies in . All 20 bronze coins can be of 50 paise. → 20 coins.
-
Silver: Denominations lie in . → 0 coins.
-
Gold & Platinum: Denominations . → 0 coins.
Maximum Possible Coins:
Hence, the maximum number of coins is 48.
Question 41 · CAT Level
Directions for Questions 41 to 44
Answer the questions on the basis of the information given below.
A technology conglomerate operates four distinct business divisions: Cloud SaaS Inhouse (SI), Cloud SaaS Export (SE), Edge Hardware Inhouse (HI), and Edge Hardware Export (HE).
The table below provides financial parameters for the conglomerate for the fiscal year 2024:
| Business Division | Annual Sales ($ in crore) | Operating Margin Percentage (%) | Headcount (Number of Employees) | Annual Salary Per Employee ($) |
|---|---|---|---|---|
| Cloud SaaS Inhouse (SI) | 0.30 | 25% | 30 | 25,000 |
| Cloud SaaS Export (SE) | 2.00 | 50% | 20 | 100,000 |
| Edge Hardware Inhouse (HI) | 0.80 | 55% | 35 | 24,000 |
| Edge Hardware Export (HE) | 2.50 | 52% | 50 | 90,000 |
Definitions:
-
Total Operating Cost
-
Margin Amount
-
In which business division was salary as a percentage of total cost the lowest?
Show answer and explanation
Answer: (B) Cloud SaaS Export (SE)
Step-by-Step Cost Breakdown:
Let us calculate the Total Operating Cost, Total Salary Cost, and Salary as a percentage of Total Cost for each division (all financial figures in 1\text{ crore} = 100\text{ lakh}$):
-
Cloud SaaS Inhouse (SI):
-
Annual Sales .
-
Total Cost .
-
Total Salary .
-
Salary as % of Total Cost .
-
-
Cloud SaaS Export (SE):
-
Annual Sales .
-
Total Cost .
-
Total Salary .
-
Salary as % of Total Cost .
-
-
Edge Hardware Inhouse (HI):
-
Annual Sales .
-
Total Cost .
-
Total Salary .
-
Salary as % of Total Cost .
-
-
Edge Hardware Export (HE):
-
Annual Sales .
-
Total Cost .
-
Total Salary .
-
Salary as % of Total Cost .
-
Comparing the percentages (), salary as a percentage of total cost was the lowest for Cloud SaaS Export (SE).
Question 42 · CAT Level
Directions for Questions 41 to 44
Answer the questions on the basis of the information given below.
A technology conglomerate operates four distinct business divisions: Cloud SaaS Inhouse (SI), Cloud SaaS Export (SE), Edge Hardware Inhouse (HI), and Edge Hardware Export (HE).
The table below provides financial parameters for the conglomerate for the fiscal year 2024:
| Business Division | Annual Sales ($ in crore) | Operating Margin Percentage (%) | Headcount (Number of Employees) | Annual Salary Per Employee ($) |
|---|---|---|---|---|
| Cloud SaaS Inhouse (SI) | 0.30 | 25% | 30 | 25,000 |
| Cloud SaaS Export (SE) | 2.00 | 50% | 20 | 100,000 |
| Edge Hardware Inhouse (HI) | 0.80 | 55% | 35 | 24,000 |
| Edge Hardware Export (HE) | 2.50 | 52% | 50 | 90,000 |
Definitions:
-
Total Operating Cost
-
Margin Amount
-
If the annual salary per employee in Cloud SaaS Inhouse decreases by $5,000, what is the percentage increase in the net margin of that division?
Show answer and explanation
Answer: (B) 20.00%
Step-by-Step Salary Savings Deduction:
In Cloud SaaS Inhouse (SI):
-
Headcount .
-
Decrease in salary per employee .
-
Net reduction in operational costs:
-
Since sales and other costs remain unchanged, the entire cost reduction directly increases the operating margin:
-
Baseline Margin in SI:
-
Percentage Increase in Net Margin:
Hence, the net margin increases by 20%.
Question 43 · CAT Level
Directions for Questions 41 to 44
Answer the questions on the basis of the information given below.
A technology conglomerate operates four distinct business divisions: Cloud SaaS Inhouse (SI), Cloud SaaS Export (SE), Edge Hardware Inhouse (HI), and Edge Hardware Export (HE).
The table below provides financial parameters for the conglomerate for the fiscal year 2024:
| Business Division | Annual Sales ($ in crore) | Operating Margin Percentage (%) | Headcount (Number of Employees) | Annual Salary Per Employee ($) |
|---|---|---|---|---|
| Cloud SaaS Inhouse (SI) | 0.30 | 25% | 30 | 25,000 |
| Cloud SaaS Export (SE) | 2.00 | 50% | 20 | 100,000 |
| Edge Hardware Inhouse (HI) | 0.80 | 55% | 35 | 24,000 |
| Edge Hardware Export (HE) | 2.50 | 52% | 50 | 90,000 |
Definitions:
-
Total Operating Cost
-
Margin Amount
-
In 2025, if the total annual sales of the company increases by 15% and the salary of the employees increases by 12.5%, what is the total margin of the company?
Show answer and explanation
Answer: (D) Data insufficient
Step-by-Step Feasibility Analysis:
Total operating cost consists of salary expenses plus all other non-salary operating costs (such as server hosting, logistics, inventory, and administrative overheads).
While sales increase by 15% and salaries increase by 12.5%, the rate of increase (or behavior) of the non-salary cost components is not provided. Furthermore, the division-wise breakdown of the sales growth across the four units is not specified. Therefore, the total margin cannot be determined, and the data is insufficient.
Question 44 · CAT Level
Directions for Questions 41 to 44
Answer the questions on the basis of the information given below.
A technology conglomerate operates four distinct business divisions: Cloud SaaS Inhouse (SI), Cloud SaaS Export (SE), Edge Hardware Inhouse (HI), and Edge Hardware Export (HE).
The table below provides financial parameters for the conglomerate for the fiscal year 2024:
| Business Division | Annual Sales ($ in crore) | Operating Margin Percentage (%) | Headcount (Number of Employees) | Annual Salary Per Employee ($) |
|---|---|---|---|---|
| Cloud SaaS Inhouse (SI) | 0.30 | 25% | 30 | 25,000 |
| Cloud SaaS Export (SE) | 2.00 | 50% | 20 | 100,000 |
| Edge Hardware Inhouse (HI) | 0.80 | 55% | 35 | 24,000 |
| Edge Hardware Export (HE) | 2.50 | 52% | 50 | 90,000 |
Definitions:
-
Total Operating Cost
-
Margin Amount
-
In 2025, if the non-salary operating cost of Edge Hardware Export increases by an amount equivalent to 15% of its total cost, by what percentage should the total salary of Edge Hardware Export be reduced so that the margin percentage of the division remains unchanged?
Show answer and explanation
Answer: (C) 40%
Step-by-Step Salary Reduction Calculation:
In Edge Hardware Export (HE):
-
Annual Sales .
-
Margin .
-
Headcount at each:
Now, if external costs in Hardware Export increase by 15% of the total operating cost:
To keep the operating margin percentage and total cost unchanged, total salary expenditure must absorb this entire increase, meaning salaries must be reduced by .
Percentage reduction in total salary:
Hence, the salary must be reduced by 40%.
Question 45 · CAT Level
Directions for Questions 45 to 48
Answer the questions on the basis of the information given below.
Lumina Mobile Inc. launched a flagship smartphone with three pre-order booking tiers:
-
Premium bookings: Delivered in the same month of booking. Customers pay 105% of the standard retail price (a 5% express surcharge).
-
Normal bookings: Delivered in the next month (). Customers pay the standard retail price (100%) with no surcharge or discount.
-
Discounted bookings: Delivered in the next-to-next month (). Customers pay 98% of the standard retail price (a 2% discount).
Full payment for all bookings was collected in the month of booking. In every booking month except April, exactly one-fifth (20%) of the bookings were Normal bookings. No bookings were accepted in October or November.
The table below gives the total bookings accepted and unit deliveries dispatched across the eight-month campaign window:
| Month | April | May | June | July | August | September | October | November |
|---|---|---|---|---|---|---|---|---|
| Total Bookings | 1,400 | 1,200 | 950 | 1,050 | 1,300 | 1,500 | 0 | 0 |
| Total Deliveries | 0 | 1,040 | 1,060 | 1,050 | 1,280 | 1,260 | 890 | 820 |
For how many months was the total premium collected more than the total discount given?
Show answer and explanation
Answer: (B) 3
Step-by-Step Backwards Unwinding:
Deliveries dispatched in any month consist of:
For May through September, :
Since no bookings occur in October or November, and .
-
November Deliveries ():
-
October Deliveries ():
-
September Deliveries ():
-
August Deliveries ():
-
July Deliveries ():
-
June Deliveries ():
Complete Deduction Summary Table:
| Booking Month | Premium | Normal | Discounted | Total Bookings |
|---|---|---|---|---|
| April | 0 | 720 | 680 | 1,400 |
| May | 320 | 240 | 640 | 1,200 |
| June | 140 | 190 | 620 | 950 |
| July | 220 | 210 | 620 | 1,050 |
| August | 450 | 260 | 590 | 1,300 |
| September | 380 | 300 | 820 | 1,500 |
Solution for Q45:
-
Premium collected .
-
Discount given .
-
Premium collected exceeds discount given whenever:
-
Checking months:
-
April: → No
-
May: → Yes (1)
-
June: → No
-
July: → No
-
August: → Yes (2)
-
September: → Yes (3)
-
This condition was satisfied in exactly 3 months (May, August, and September).
Question 46 · CAT Level
Directions for Questions 45 to 48
Answer the questions on the basis of the information given below.
Lumina Mobile Inc. launched a flagship smartphone with three pre-order booking tiers:
-
Premium bookings: Delivered in the same month of booking. Customers pay 105% of the standard retail price (a 5% express surcharge).
-
Normal bookings: Delivered in the next month (). Customers pay the standard retail price (100%) with no surcharge or discount.
-
Discounted bookings: Delivered in the next-to-next month (). Customers pay 98% of the standard retail price (a 2% discount).
Full payment for all bookings was collected in the month of booking. In every booking month except April, exactly one-fifth (20%) of the bookings were Normal bookings. No bookings were accepted in October or November.
The table below gives the total bookings accepted and unit deliveries dispatched across the eight-month campaign window:
| Month | April | May | June | July | August | September | October | November |
|---|---|---|---|---|---|---|---|---|
| Total Bookings | 1,400 | 1,200 | 950 | 1,050 | 1,300 | 1,500 | 0 | 0 |
| Total Deliveries | 0 | 1,040 | 1,060 | 1,050 | 1,280 | 1,260 | 890 | 820 |
In which month was the number of premium bookings as a percentage of total bookings highest?
Show answer and explanation
Answer: (A) August
Step-by-Step Backwards Unwinding:
Deliveries dispatched in any month consist of:
For May through September, :
Since no bookings occur in October or November, and .
-
November Deliveries ():
-
October Deliveries ():
-
September Deliveries ():
-
August Deliveries ():
-
July Deliveries ():
-
June Deliveries ():
Complete Deduction Summary Table:
| Booking Month | Premium | Normal | Discounted | Total Bookings |
|---|---|---|---|---|
| April | 0 | 720 | 680 | 1,400 |
| May | 320 | 240 | 640 | 1,200 |
| June | 140 | 190 | 620 | 950 |
| July | 220 | 210 | 620 | 1,050 |
| August | 450 | 260 | 590 | 1,300 |
| September | 380 | 300 | 820 | 1,500 |
Solution for Q46:
Let us compute the premium booking percentage for each month:
-
May:
-
June:
-
July:
-
August: (Highest!)
-
September:
The percentage was highest in August (34.62%).
Question 47 · CAT Level
Directions for Questions 45 to 48
Answer the questions on the basis of the information given below.
Lumina Mobile Inc. launched a flagship smartphone with three pre-order booking tiers:
-
Premium bookings: Delivered in the same month of booking. Customers pay 105% of the standard retail price (a 5% express surcharge).
-
Normal bookings: Delivered in the next month (). Customers pay the standard retail price (100%) with no surcharge or discount.
-
Discounted bookings: Delivered in the next-to-next month (). Customers pay 98% of the standard retail price (a 2% discount).
Full payment for all bookings was collected in the month of booking. In every booking month except April, exactly one-fifth (20%) of the bookings were Normal bookings. No bookings were accepted in October or November.
The table below gives the total bookings accepted and unit deliveries dispatched across the eight-month campaign window:
| Month | April | May | June | July | August | September | October | November |
|---|---|---|---|---|---|---|---|---|
| Total Bookings | 1,400 | 1,200 | 950 | 1,050 | 1,300 | 1,500 | 0 | 0 |
| Total Deliveries | 0 | 1,040 | 1,060 | 1,050 | 1,280 | 1,260 | 890 | 820 |
How many smartphones booked in June were delivered in August?
Show answer and explanation
Answer: (B) 620
Step-by-Step Backwards Unwinding:
Deliveries dispatched in any month consist of:
For May through September, :
Since no bookings occur in October or November, and .
-
November Deliveries ():
-
October Deliveries ():
-
September Deliveries ():
-
August Deliveries ():
-
July Deliveries ():
-
June Deliveries ():
Complete Deduction Summary Table:
| Booking Month | Premium | Normal | Discounted | Total Bookings |
|---|---|---|---|---|
| April | 0 | 720 | 680 | 1,400 |
| May | 320 | 240 | 640 | 1,200 |
| June | 140 | 190 | 620 | 950 |
| July | 220 | 210 | 620 | 1,050 |
| August | 450 | 260 | 590 | 1,300 |
| September | 380 | 300 | 820 | 1,500 |
Solution for Q47:
Smartphones booked in June and delivered in August correspond to the Discounted bookings of June (delivered at ).
From our table, Discounted bookings in June .
Question 48 · CAT Level
Directions for Questions 45 to 48
Answer the questions on the basis of the information given below.
Lumina Mobile Inc. launched a flagship smartphone with three pre-order booking tiers:
-
Premium bookings: Delivered in the same month of booking. Customers pay 105% of the standard retail price (a 5% express surcharge).
-
Normal bookings: Delivered in the next month (). Customers pay the standard retail price (100%) with no surcharge or discount.
-
Discounted bookings: Delivered in the next-to-next month (). Customers pay 98% of the standard retail price (a 2% discount).
Full payment for all bookings was collected in the month of booking. In every booking month except April, exactly one-fifth (20%) of the bookings were Normal bookings. No bookings were accepted in October or November.
The table below gives the total bookings accepted and unit deliveries dispatched across the eight-month campaign window:
| Month | April | May | June | July | August | September | October | November |
|---|---|---|---|---|---|---|---|---|
| Total Bookings | 1,400 | 1,200 | 950 | 1,050 | 1,300 | 1,500 | 0 | 0 |
| Total Deliveries | 0 | 1,040 | 1,060 | 1,050 | 1,280 | 1,260 | 890 | 820 |
In how many months did discounted bookings constitute not more than half (50% or less) of total bookings in that month?
Show answer and explanation
Answer: (B) 2
Step-by-Step Backwards Unwinding:
Deliveries dispatched in any month consist of:
For May through September, :
Since no bookings occur in October or November, and .
-
November Deliveries ():
-
October Deliveries ():
-
September Deliveries ():
-
August Deliveries ():
-
July Deliveries ():
-
June Deliveries ():
Complete Deduction Summary Table:
| Booking Month | Premium | Normal | Discounted | Total Bookings |
|---|---|---|---|---|
| April | 0 | 720 | 680 | 1,400 |
| May | 320 | 240 | 640 | 1,200 |
| June | 140 | 190 | 620 | 950 |
| July | 220 | 210 | 620 | 1,050 |
| August | 450 | 260 | 590 | 1,300 |
| September | 380 | 300 | 820 | 1,500 |
Solution for Q48:
Let us check each booking month for :
-
April: → Yes (1)
-
May: → No
-
June: → No
-
July: → No
-
August: → Yes (2)
-
September: → No
Discounted bookings constituted of total bookings in exactly 2 months (April and August).
Question 49 · CAT Level
Directions for Questions 49 to 52
Answer the questions on the basis of the information given below.
During an annual enterprise procurement drive, an executive bought specialized corporate gifts from ten boutique supply outlets, designated Sh1, Sh2, Sh3, ..., Sh10. These ten outlets are located across four commercial zones: Andheri, CP, NFC, and Gurgaon. Exactly four types of corporate gifts were procured: Watches, Wallets, Perfumes, and Pens.
Each outlet is located in exactly one commercial zone.
Table 1 details the number of gifts of each type procured from each of the ten outlets, and Table 2 details the aggregate number of gifts of each type procured across the four commercial zones:
Table 1: Gifts procured from individual outlets
| Outlet | Watches | Wallets | Perfumes | Pens |
|---|---|---|---|---|
| Sh1 | 0 | 2 | 0 | 1 |
| Sh2 | 3 | 1 | 0 | 1 |
| Sh3 | 1 | 3 | 2 | 1 |
| Sh4 | 2 | 0 | 0 | 3 |
| Sh5 | 1 | 1 | 1 | 2 |
| Sh6 | 4 | 2 | 0 | 1 |
| Sh7 | 0 | 1 | 1 | 2 |
| Sh8 | 2 | 2 | 0 | 2 |
| Sh9 | 3 | 1 | 0 | 2 |
| Sh10 | 1 | 2 | 2 | 1 |
Table 2: Total gifts procured by commercial zone
| Commercial Zone | Watches | Wallets | Perfumes | Pens |
|---|---|---|---|---|
| Andheri | 7 | 4 | 1 | 4 |
| CP | 5 | 1 | 0 | 5 |
| NFC | 2 | 4 | 3 | 3 |
| Gurgaon | 3 | 6 | 2 | 4 |
Sh7 is located in which commercial zone?
Show answer and explanation
Answer: (A) Andheri
Step-by-Step Zone Assignment Analysis:
Let each shop vector be denoted by .
-
Zone CP — Target: :
-
Perfumes , Wallets , Pens .
-
Outlets with Perfumes : Sh1 , Sh2 , Sh4 , Sh6 , Sh8 , Sh9 .
-
We need sum of Wallets . The only combination having Wallets is an outlet with 1 wallet and an outlet with 0 wallets: Sh4 and Sh9 .
-
Sum . Exactly matches CP!
-
Thus, CP comprises exactly two outlets: Sh4 and Sh9.
-
-
Zone NFC — Target: :
-
Perfumes . Outlets with perfumes: Sh3 (2), Sh5 (1), Sh7 (1), Sh10 (2).
-
To get Perfumes : either with 2 shops, or with 3 shops.
-
Testing Sh3 and Sh5 :
Matches NFC exactly!
-
Thus, NFC comprises exactly two outlets: Sh3 and Sh5.
-
-
Zone Andheri — Target: :
-
Remaining outlets: Sh1, Sh2, Sh6, Sh7, Sh8, Sh10.
-
Perfumes . Among remaining outlets, only Sh7 has Perfumes .
-
Subtracting Sh7 from Andheri target: .
-
We need remaining outlets to sum to :
- Sh2 and Sh6 sum to !
-
Thus, Andheri comprises exactly three outlets: Sh2, Sh6, and Sh7.
-
-
Zone Gurgaon — Target: :
-
Remaining unassigned outlets: Sh1, Sh8, and Sh10.
-
Check sum:
-
Matches Gurgaon exactly!
-
Final Complete Outlet Allocation:
-
Andheri: Sh2, Sh6, Sh7 (3 outlets)
-
CP: Sh4, Sh9 (2 outlets)
-
NFC: Sh3, Sh5 (2 outlets)
-
Gurgaon: Sh1, Sh8, Sh10 (3 outlets)
Hence, Sh7 is located in Andheri.
Question 50 · CAT Level
Directions for Questions 49 to 52
Answer the questions on the basis of the information given below.
During an annual enterprise procurement drive, an executive bought specialized corporate gifts from ten boutique supply outlets, designated Sh1, Sh2, Sh3, ..., Sh10. These ten outlets are located across four commercial zones: Andheri, CP, NFC, and Gurgaon. Exactly four types of corporate gifts were procured: Watches, Wallets, Perfumes, and Pens.
Each outlet is located in exactly one commercial zone.
Table 1 details the number of gifts of each type procured from each of the ten outlets, and Table 2 details the aggregate number of gifts of each type procured across the four commercial zones:
Table 1: Gifts procured from individual outlets
| Outlet | Watches | Wallets | Perfumes | Pens |
|---|---|---|---|---|
| Sh1 | 0 | 2 | 0 | 1 |
| Sh2 | 3 | 1 | 0 | 1 |
| Sh3 | 1 | 3 | 2 | 1 |
| Sh4 | 2 | 0 | 0 | 3 |
| Sh5 | 1 | 1 | 1 | 2 |
| Sh6 | 4 | 2 | 0 | 1 |
| Sh7 | 0 | 1 | 1 | 2 |
| Sh8 | 2 | 2 | 0 | 2 |
| Sh9 | 3 | 1 | 0 | 2 |
| Sh10 | 1 | 2 | 2 | 1 |
Table 2: Total gifts procured by commercial zone
| Commercial Zone | Watches | Wallets | Perfumes | Pens |
|---|---|---|---|---|
| Andheri | 7 | 4 | 1 | 4 |
| CP | 5 | 1 | 0 | 5 |
| NFC | 2 | 4 | 3 | 3 |
| Gurgaon | 3 | 6 | 2 | 4 |
Which of the following groups of shops are not located in Andheri?
Show answer and explanation
Answer: (C) Sh2 and Sh9
Step-by-Step Zone Assignment Analysis:
Let each shop vector be denoted by .
-
Zone CP — Target: :
-
Perfumes , Wallets , Pens .
-
Outlets with Perfumes : Sh1 , Sh2 , Sh4 , Sh6 , Sh8 , Sh9 .
-
We need sum of Wallets . The only combination having Wallets is an outlet with 1 wallet and an outlet with 0 wallets: Sh4 and Sh9 .
-
Sum . Exactly matches CP!
-
Thus, CP comprises exactly two outlets: Sh4 and Sh9.
-
-
Zone NFC — Target: :
-
Perfumes . Outlets with perfumes: Sh3 (2), Sh5 (1), Sh7 (1), Sh10 (2).
-
To get Perfumes : either with 2 shops, or with 3 shops.
-
Testing Sh3 and Sh5 :
Matches NFC exactly!
-
Thus, NFC comprises exactly two outlets: Sh3 and Sh5.
-
-
Zone Andheri — Target: :
-
Remaining outlets: Sh1, Sh2, Sh6, Sh7, Sh8, Sh10.
-
Perfumes . Among remaining outlets, only Sh7 has Perfumes .
-
Subtracting Sh7 from Andheri target: .
-
We need remaining outlets to sum to :
- Sh2 and Sh6 sum to !
-
Thus, Andheri comprises exactly three outlets: Sh2, Sh6, and Sh7.
-
-
Zone Gurgaon — Target: :
-
Remaining unassigned outlets: Sh1, Sh8, and Sh10.
-
Check sum:
-
Matches Gurgaon exactly!
-
Final Complete Outlet Allocation:
-
Andheri: Sh2, Sh6, Sh7 (3 outlets)
-
CP: Sh4, Sh9 (2 outlets)
-
NFC: Sh3, Sh5 (2 outlets)
-
Gurgaon: Sh1, Sh8, Sh10 (3 outlets)
Sh2 is located in Andheri, but Sh9 is located in CP. Therefore, the group Sh2 and Sh9 are not located together in Andheri.
Question 51 · CAT Level
Directions for Questions 49 to 52
Answer the questions on the basis of the information given below.
During an annual enterprise procurement drive, an executive bought specialized corporate gifts from ten boutique supply outlets, designated Sh1, Sh2, Sh3, ..., Sh10. These ten outlets are located across four commercial zones: Andheri, CP, NFC, and Gurgaon. Exactly four types of corporate gifts were procured: Watches, Wallets, Perfumes, and Pens.
Each outlet is located in exactly one commercial zone.
Table 1 details the number of gifts of each type procured from each of the ten outlets, and Table 2 details the aggregate number of gifts of each type procured across the four commercial zones:
Table 1: Gifts procured from individual outlets
| Outlet | Watches | Wallets | Perfumes | Pens |
|---|---|---|---|---|
| Sh1 | 0 | 2 | 0 | 1 |
| Sh2 | 3 | 1 | 0 | 1 |
| Sh3 | 1 | 3 | 2 | 1 |
| Sh4 | 2 | 0 | 0 | 3 |
| Sh5 | 1 | 1 | 1 | 2 |
| Sh6 | 4 | 2 | 0 | 1 |
| Sh7 | 0 | 1 | 1 | 2 |
| Sh8 | 2 | 2 | 0 | 2 |
| Sh9 | 3 | 1 | 0 | 2 |
| Sh10 | 1 | 2 | 2 | 1 |
Table 2: Total gifts procured by commercial zone
| Commercial Zone | Watches | Wallets | Perfumes | Pens |
|---|---|---|---|---|
| Andheri | 7 | 4 | 1 | 4 |
| CP | 5 | 1 | 0 | 5 |
| NFC | 2 | 4 | 3 | 3 |
| Gurgaon | 3 | 6 | 2 | 4 |
Which commercial zone definitely has only 2 of these outlets?
Show answer and explanation
Answer: (C) CP
Step-by-Step Zone Assignment Analysis:
Let each shop vector be denoted by .
-
Zone CP — Target: :
-
Perfumes , Wallets , Pens .
-
Outlets with Perfumes : Sh1 , Sh2 , Sh4 , Sh6 , Sh8 , Sh9 .
-
We need sum of Wallets . The only combination having Wallets is an outlet with 1 wallet and an outlet with 0 wallets: Sh4 and Sh9 .
-
Sum . Exactly matches CP!
-
Thus, CP comprises exactly two outlets: Sh4 and Sh9.
-
-
Zone NFC — Target: :
-
Perfumes . Outlets with perfumes: Sh3 (2), Sh5 (1), Sh7 (1), Sh10 (2).
-
To get Perfumes : either with 2 shops, or with 3 shops.
-
Testing Sh3 and Sh5 :
Matches NFC exactly!
-
Thus, NFC comprises exactly two outlets: Sh3 and Sh5.
-
-
Zone Andheri — Target: :
-
Remaining outlets: Sh1, Sh2, Sh6, Sh7, Sh8, Sh10.
-
Perfumes . Among remaining outlets, only Sh7 has Perfumes .
-
Subtracting Sh7 from Andheri target: .
-
We need remaining outlets to sum to :
- Sh2 and Sh6 sum to !
-
Thus, Andheri comprises exactly three outlets: Sh2, Sh6, and Sh7.
-
-
Zone Gurgaon — Target: :
-
Remaining unassigned outlets: Sh1, Sh8, and Sh10.
-
Check sum:
-
Matches Gurgaon exactly!
-
Final Complete Outlet Allocation:
-
Andheri: Sh2, Sh6, Sh7 (3 outlets)
-
CP: Sh4, Sh9 (2 outlets)
-
NFC: Sh3, Sh5 (2 outlets)
-
Gurgaon: Sh1, Sh8, Sh10 (3 outlets)
Both CP (Sh4, Sh9) and NFC (Sh3, Sh5) have exactly 2 outlets. Among the given options, CP is the correct choice.
Question 52 · CAT Level
Directions for Questions 49 to 52
Answer the questions on the basis of the information given below.
During an annual enterprise procurement drive, an executive bought specialized corporate gifts from ten boutique supply outlets, designated Sh1, Sh2, Sh3, ..., Sh10. These ten outlets are located across four commercial zones: Andheri, CP, NFC, and Gurgaon. Exactly four types of corporate gifts were procured: Watches, Wallets, Perfumes, and Pens.
Each outlet is located in exactly one commercial zone.
Table 1 details the number of gifts of each type procured from each of the ten outlets, and Table 2 details the aggregate number of gifts of each type procured across the four commercial zones:
Table 1: Gifts procured from individual outlets
| Outlet | Watches | Wallets | Perfumes | Pens |
|---|---|---|---|---|
| Sh1 | 0 | 2 | 0 | 1 |
| Sh2 | 3 | 1 | 0 | 1 |
| Sh3 | 1 | 3 | 2 | 1 |
| Sh4 | 2 | 0 | 0 | 3 |
| Sh5 | 1 | 1 | 1 | 2 |
| Sh6 | 4 | 2 | 0 | 1 |
| Sh7 | 0 | 1 | 1 | 2 |
| Sh8 | 2 | 2 | 0 | 2 |
| Sh9 | 3 | 1 | 0 | 2 |
| Sh10 | 1 | 2 | 2 | 1 |
Table 2: Total gifts procured by commercial zone
| Commercial Zone | Watches | Wallets | Perfumes | Pens |
|---|---|---|---|---|
| Andheri | 7 | 4 | 1 | 4 |
| CP | 5 | 1 | 0 | 5 |
| NFC | 2 | 4 | 3 | 3 |
| Gurgaon | 3 | 6 | 2 | 4 |
Which of the following shops is located in Gurgaon?
Show answer and explanation
Answer: (D) More than one of the above
Step-by-Step Zone Assignment Analysis:
Let each shop vector be denoted by .
-
Zone CP — Target: :
-
Perfumes , Wallets , Pens .
-
Outlets with Perfumes : Sh1 , Sh2 , Sh4 , Sh6 , Sh8 , Sh9 .
-
We need sum of Wallets . The only combination having Wallets is an outlet with 1 wallet and an outlet with 0 wallets: Sh4 and Sh9 .
-
Sum . Exactly matches CP!
-
Thus, CP comprises exactly two outlets: Sh4 and Sh9.
-
-
Zone NFC — Target: :
-
Perfumes . Outlets with perfumes: Sh3 (2), Sh5 (1), Sh7 (1), Sh10 (2).
-
To get Perfumes : either with 2 shops, or with 3 shops.
-
Testing Sh3 and Sh5 :
Matches NFC exactly!
-
Thus, NFC comprises exactly two outlets: Sh3 and Sh5.
-
-
Zone Andheri — Target: :
-
Remaining outlets: Sh1, Sh2, Sh6, Sh7, Sh8, Sh10.
-
Perfumes . Among remaining outlets, only Sh7 has Perfumes .
-
Subtracting Sh7 from Andheri target: .
-
We need remaining outlets to sum to :
- Sh2 and Sh6 sum to !
-
Thus, Andheri comprises exactly three outlets: Sh2, Sh6, and Sh7.
-
-
Zone Gurgaon — Target: :
-
Remaining unassigned outlets: Sh1, Sh8, and Sh10.
-
Check sum:
-
Matches Gurgaon exactly!
-
Final Complete Outlet Allocation:
-
Andheri: Sh2, Sh6, Sh7 (3 outlets)
-
CP: Sh4, Sh9 (2 outlets)
-
NFC: Sh3, Sh5 (2 outlets)
-
Gurgaon: Sh1, Sh8, Sh10 (3 outlets)
The outlets located in Gurgaon are Sh1, Sh8, and Sh10. Since both Sh1 and Sh8 are located in Gurgaon, the correct answer is More than one of the above.
Question 53 · CAT Level
Directions for Questions 53 to 56
Answer the questions on the basis of the information given below.
The table below outlines the postpaid tariff structures offered by three enterprise telecom operators: ApexTel, Horizon, and ZenithMobile.
Unless specified otherwise, monthly line rental and CLIP (Caller Line Identification Presentation) fees are billed monthly, while voice calls are charged in dollars per minute. SMS rates are billed per individual message. A user is on roaming when traveling outside their home circle; roaming rental applies only when roaming services are active.
All Charges in Dollars ($)
| Tariff Component | ApexTel | Horizon | ZenithMobile |
|---|---|---|---|
| Monthly Line Rental | 180 | 200 | 120 |
| CLIP Charges | 60 | 80 | 80 |
| Incoming Calls (Home Circle) | Free | Free | Free |
| STD Calls | 2.50 | 3.00 | 3.00 |
| Local Calls to: | |||
| GSM Mobile | 1.50 | 1.50 | 1.00 |
| Landline Phone | 3.00 | 2.00 | 2.00 |
| CDMA Mobile | 2.50 | 2.00 | 2.50 |
| SMS Rates: | |||
| Local SMS | 1.00 | 1.00 | 1.00 |
| National SMS | 2.00 | 2.00 | 1.50 |
| International SMS | 5.00 | 5.00 | 3.00 |
| National Roaming: | |||
| Roaming Rental | 60 per month | 120 per month | 2.00 per day |
| Roaming Incoming Calls | 2.00 | 3.00 | 2.50 |
| Roaming Outgoing Calls | 2.00 | 3.00 | 2.50 |
| Roaming SMS | 2.00 | 2.00 | 2.00 |
A sales manager travels for 10 days in a month outside his home circle. During this period, on average, he receives 6 calls of 1 min each per day and makes 3 calls of 1 min each per day. He does not use SMS while roaming. To minimize his mobile expenses for these 10 days, which provider should he choose?
Show answer and explanation
Answer: (B) ApexTel
Step-by-Step 10-Day Roaming Cost Comparison:
During the 10 days on roaming:
-
Incoming calls:
-
Outgoing calls:
-
Total voice traffic on roaming
Let us calculate the incremental roaming expense for each operator:
-
ApexTel:
-
Roaming rental (flat monthly fee).
-
Call charges .
-
Total roaming expense .
-
-
Horizon:
-
Roaming rental (flat monthly fee).
-
Call charges .
-
Total roaming expense .
-
-
ZenithMobile:
-
Roaming rental .
-
Call charges .
-
Total roaming expense .
-
Comparing the three (), ApexTel minimizes mobile expenses at $240.
Question 54 · CAT Level
Directions for Questions 53 to 56
Answer the questions on the basis of the information given below.
The table below outlines the postpaid tariff structures offered by three enterprise telecom operators: ApexTel, Horizon, and ZenithMobile.
Unless specified otherwise, monthly line rental and CLIP (Caller Line Identification Presentation) fees are billed monthly, while voice calls are charged in dollars per minute. SMS rates are billed per individual message. A user is on roaming when traveling outside their home circle; roaming rental applies only when roaming services are active.
All Charges in Dollars ($)
| Tariff Component | ApexTel | Horizon | ZenithMobile |
|---|---|---|---|
| Monthly Line Rental | 180 | 200 | 120 |
| CLIP Charges | 60 | 80 | 80 |
| Incoming Calls (Home Circle) | Free | Free | Free |
| STD Calls | 2.50 | 3.00 | 3.00 |
| Local Calls to: | |||
| GSM Mobile | 1.50 | 1.50 | 1.00 |
| Landline Phone | 3.00 | 2.00 | 2.00 |
| CDMA Mobile | 2.50 | 2.00 | 2.50 |
| SMS Rates: | |||
| Local SMS | 1.00 | 1.00 | 1.00 |
| National SMS | 2.00 | 2.00 | 1.50 |
| International SMS | 5.00 | 5.00 | 3.00 |
| National Roaming: | |||
| Roaming Rental | 60 per month | 120 per month | 2.00 per day |
| Roaming Incoming Calls | 2.00 | 3.00 | 2.50 |
| Roaming Outgoing Calls | 2.00 | 3.00 | 2.50 |
| Roaming SMS | 2.00 | 2.00 | 2.00 |
If all three operators decide to charge the exact same rates for all voice calls (both local and STD) and SMS, which operator should a subscriber who does not travel outside his home circle choose?
Show answer and explanation
Answer: (A) ZenithMobile
Step-by-Step Analysis:
For a subscriber who does not travel outside his home state, roaming charges are never incurred.
If all operators charge the same rate for all voice calls (local and STD) and SMS, the total monthly usage charges would be identical across all three providers.
Therefore, the choice solely depends on the fixed mandatory monthly charges:
-
ApexTel:
-
Horizon:
-
ZenithMobile:
ZenithMobile has the lowest fixed monthly charges ($200). Thus, the subscriber should choose ZenithMobile.
Question 55 · CAT Level
Directions for Questions 53 to 56
Answer the questions on the basis of the information given below.
The table below outlines the postpaid tariff structures offered by three enterprise telecom operators: ApexTel, Horizon, and ZenithMobile.
Unless specified otherwise, monthly line rental and CLIP (Caller Line Identification Presentation) fees are billed monthly, while voice calls are charged in dollars per minute. SMS rates are billed per individual message. A user is on roaming when traveling outside their home circle; roaming rental applies only when roaming services are active.
All Charges in Dollars ($)
| Tariff Component | ApexTel | Horizon | ZenithMobile |
|---|---|---|---|
| Monthly Line Rental | 180 | 200 | 120 |
| CLIP Charges | 60 | 80 | 80 |
| Incoming Calls (Home Circle) | Free | Free | Free |
| STD Calls | 2.50 | 3.00 | 3.00 |
| Local Calls to: | |||
| GSM Mobile | 1.50 | 1.50 | 1.00 |
| Landline Phone | 3.00 | 2.00 | 2.00 |
| CDMA Mobile | 2.50 | 2.00 | 2.50 |
| SMS Rates: | |||
| Local SMS | 1.00 | 1.00 | 1.00 |
| National SMS | 2.00 | 2.00 | 1.50 |
| International SMS | 5.00 | 5.00 | 3.00 |
| National Roaming: | |||
| Roaming Rental | 60 per month | 120 per month | 2.00 per day |
| Roaming Incoming Calls | 2.00 | 3.00 | 2.50 |
| Roaming Outgoing Calls | 2.00 | 3.00 | 2.50 |
| Roaming SMS | 2.00 | 2.00 | 2.00 |
A subscriber who never travels outside his home circle has a monthly budget of $1,600. He makes local calls for equal durations to GSM, landline, and CDMA phones, and makes no STD calls or SMS. Which provider will afford him the maximum total calling time?
Show answer and explanation
Answer: (C) ZenithMobile
Step-by-Step Talk Time Optimization:
Budget per month.
The user divides his calling time equally among local GSM, landline, and CDMA phones ( minutes on each, total talk time minutes).
-
Available Balance for Calls:
-
ApexTel:
-
Horizon:
-
ZenithMobile:
-
-
Combined Rate for 1 minute each to GSM, Landline, and CDMA:
-
ApexTel:
-
Horizon:
-
ZenithMobile:
-
Comparing the total talk time (), ZenithMobile provides the maximum call duration.
Question 56 · CAT Level
Directions for Questions 53 to 56
Answer the questions on the basis of the information given below.
The table below outlines the postpaid tariff structures offered by three enterprise telecom operators: ApexTel, Horizon, and ZenithMobile.
Unless specified otherwise, monthly line rental and CLIP (Caller Line Identification Presentation) fees are billed monthly, while voice calls are charged in dollars per minute. SMS rates are billed per individual message. A user is on roaming when traveling outside their home circle; roaming rental applies only when roaming services are active.
All Charges in Dollars ($)
| Tariff Component | ApexTel | Horizon | ZenithMobile |
|---|---|---|---|
| Monthly Line Rental | 180 | 200 | 120 |
| CLIP Charges | 60 | 80 | 80 |
| Incoming Calls (Home Circle) | Free | Free | Free |
| STD Calls | 2.50 | 3.00 | 3.00 |
| Local Calls to: | |||
| GSM Mobile | 1.50 | 1.50 | 1.00 |
| Landline Phone | 3.00 | 2.00 | 2.00 |
| CDMA Mobile | 2.50 | 2.00 | 2.50 |
| SMS Rates: | |||
| Local SMS | 1.00 | 1.00 | 1.00 |
| National SMS | 2.00 | 2.00 | 1.50 |
| International SMS | 5.00 | 5.00 | 3.00 |
| National Roaming: | |||
| Roaming Rental | 60 per month | 120 per month | 2.00 per day |
| Roaming Incoming Calls | 2.00 | 3.00 | 2.50 |
| Roaming Outgoing Calls | 2.00 | 3.00 | 2.50 |
| Roaming SMS | 2.00 | 2.00 | 2.00 |
ZenithMobile waives off CLIP charges if a customer roams for 7 or more days in a month. A subscriber on roaming for 10 days receives an equal integer number of 1-minute incoming calls every day and uses no outgoing voice or SMS. What is the maximum number of calls he can receive daily such that his roaming incoming call charges do not exceed $80?
Show answer and explanation
Answer: (A) 3
Step-by-Step Incoming Roaming Capacity:
-
Subscriber is on roaming for 10 days using ZenithMobile.
-
Incoming roaming rate on ZenithMobile per minute.
-
Target: Total incoming call charges while roaming must not exceed .
Since he receives the same integer number of 1-minute calls each day across the 10 days:
Taking the maximum possible integer:
(Note: 4 calls per day would yield ).
Hence, he can receive a maximum of 3 calls every day.
Question 57 · CAT Level
Directions for Questions 57 to 60
Answer the questions on the basis of the information given below.
The table below provides partial compositional analysis for six advanced aerospace alloys: A, B, C, D, E, and F. Each alloy is synthesized from five metallic constituents: Zinc, Tin, Lead, Copper, and Nickel.
An experimental master alloy, Alloy G, is synthesized by mixing Alloys A, B, and C in the mass ratio 2 : 1 : 3. In Alloy G, the percentage concentrations of Tin, Lead, and Copper are exactly equal to each other.
| Alloy | Zinc | Tin | Lead | Copper | Nickel |
|---|---|---|---|---|---|
| A | 15% | 30% | — | — | 10% |
| B | 20% | 25% | 40% | 10% | 5% |
| C | 15% | — | 10% | 30% | 30% |
| D | 20% | 25% | 15% | 30% | 10% |
| E | 5% | 45% | 25% | 10% | 15% |
| F | 35% | 15% | 5% | 30% | 15% |
Find the percentage of copper in alloy A.
Show answer and explanation
Answer: (A) 15%
Step-by-Step Algebraic Derivation for Alloy A and C:
In each alloy, the five elemental percentages must sum to 100%:
-
Alloy A: , , .
-
Remaining sum for .
-
Let .
-
-
Alloy B: , , , , (Total = 100%).
-
Alloy C: , , , .
-
Remaining sum for .
-
Thus, .
-
-
Formulate Concentrations in Alloy G (Mixing ratio A : B : C = 2 : 1 : 3, Total mass = 6):
-
Percentage of Tin in G:
-
Percentage of Lead in G:
-
Percentage of Copper in G:
-
-
Solve for :
Since :
Check equality with Tin:
Consistency confirmed!
-
Percentage of Copper in Alloy A:
Hence, the percentage of copper in alloy A is 15%.
Question 58 · CAT Level
Directions for Questions 57 to 60
Answer the questions on the basis of the information given below.
The table below provides partial compositional analysis for six advanced aerospace alloys: A, B, C, D, E, and F. Each alloy is synthesized from five metallic constituents: Zinc, Tin, Lead, Copper, and Nickel.
An experimental master alloy, Alloy G, is synthesized by mixing Alloys A, B, and C in the mass ratio 2 : 1 : 3. In Alloy G, the percentage concentrations of Tin, Lead, and Copper are exactly equal to each other.
| Alloy | Zinc | Tin | Lead | Copper | Nickel |
|---|---|---|---|---|---|
| A | 15% | 30% | — | — | 10% |
| B | 20% | 25% | 40% | 10% | 5% |
| C | 15% | — | 10% | 30% | 30% |
| D | 20% | 25% | 15% | 30% | 10% |
| E | 5% | 45% | 25% | 10% | 15% |
| F | 35% | 15% | 5% | 30% | 15% |
If an alloy X, which contains 15% nickel, at least 15% zinc, and at most 25% copper, is to be made, how many combinations of exactly two of the six mentioned alloys can be used to make it?
Show answer and explanation
Answer: (A) Three
Step-by-Step Binary Mixture Combinations:
Alloy X must contain:
-
Exactly Nickel
-
At least Zinc ()
-
At most Copper ()
Nickel concentrations in the six candidate alloys:
-
Alloy A:
-
Alloy B:
-
Alloy C:
-
Alloy D:
-
Alloy E:
-
Alloy F:
To obtain exactly Nickel by blending exactly two alloys:
-
Case 1: Both alloys already have 15% Nickel:
-
Pair (E, F):
-
Both have Nickel → any mixture yields Nickel.
-
Zinc: Alloy E has , Alloy F has . For Zinc , fraction of F must be at least .
-
Copper: Alloy E has , Alloy F has . For Copper , fraction of F must be at most .
-
Since is non-empty, a valid blend of (E, F) exists! → Valid Combination 1
-
-
-
Case 2: One alloy has Nickel < 15% and one has Nickel > 15%:
-
The only alloy with is Alloy C ().
-
Alloys with are A (), B (), and D ().
-
Pair (A, C):
-
Ratio to achieve Nickel: (3 parts A to 1 part C).
-
Zinc: (Satisfied).
-
Copper: (Satisfied).
-
→ Valid Combination 2
-
-
Pair (B, C):
-
Ratio for Nickel: (3 parts B to 2 parts C).
-
Zinc: (Satisfied).
-
Copper: (Satisfied).
-
→ Valid Combination 3
-
-
Pair (D, C):
-
Ratio for Nickel: (3 parts D to 1 part C).
-
Zinc: .
-
Copper: (Fails Copper constraint).
-
-
Hence, exactly Three combinations can be used: (E, F), (A, C), and (B, C).
Question 59 · CAT Level
Directions for Questions 57 to 60
Answer the questions on the basis of the information given below.
The table below provides partial compositional analysis for six advanced aerospace alloys: A, B, C, D, E, and F. Each alloy is synthesized from five metallic constituents: Zinc, Tin, Lead, Copper, and Nickel.
An experimental master alloy, Alloy G, is synthesized by mixing Alloys A, B, and C in the mass ratio 2 : 1 : 3. In Alloy G, the percentage concentrations of Tin, Lead, and Copper are exactly equal to each other.
| Alloy | Zinc | Tin | Lead | Copper | Nickel |
|---|---|---|---|---|---|
| A | 15% | 30% | — | — | 10% |
| B | 20% | 25% | 40% | 10% | 5% |
| C | 15% | — | 10% | 30% | 30% |
| D | 20% | 25% | 15% | 30% | 10% |
| E | 5% | 45% | 25% | 10% | 15% |
| F | 35% | 15% | 5% | 30% | 15% |
Which of the following can be the ratio in which alloys A, E, and F need to be mixed to get at least 18% lead in the resulting mixture?
Show answer and explanation
Answer: (C) 2 : 2 : 1
Step-by-Step Lead Concentration Check:
Lead concentrations:
-
Alloy A:
-
Alloy E:
-
Alloy F:
Target: Mixture must have at least 18% Lead.
Let us test the given mixing ratio options:
-
Ratio 1 : 2 : 3:
-
Ratio 1 : 1 : 2:
-
Ratio 2 : 2 : 1:
Condition satisfied!
-
Ratio 1 : 1 : 4:
Hence, 2 : 2 : 1 is the correct ratio.
Question 60 · CAT Level
Directions for Questions 57 to 60
Answer the questions on the basis of the information given below.
The table below provides partial compositional analysis for six advanced aerospace alloys: A, B, C, D, E, and F. Each alloy is synthesized from five metallic constituents: Zinc, Tin, Lead, Copper, and Nickel.
An experimental master alloy, Alloy G, is synthesized by mixing Alloys A, B, and C in the mass ratio 2 : 1 : 3. In Alloy G, the percentage concentrations of Tin, Lead, and Copper are exactly equal to each other.
| Alloy | Zinc | Tin | Lead | Copper | Nickel |
|---|---|---|---|---|---|
| A | 15% | 30% | — | — | 10% |
| B | 20% | 25% | 40% | 10% | 5% |
| C | 15% | — | 10% | 30% | 30% |
| D | 20% | 25% | 15% | 30% | 10% |
| E | 5% | 45% | 25% | 10% | 15% |
| F | 35% | 15% | 5% | 30% | 15% |
If an alloy Z, which contains at least 10% nickel, is to be made by using the alloys mentioned in the table, the percentage of alloy B in alloy Z cannot be more than:
Show answer and explanation
Answer: (A) 80.00%
Step-by-Step Maximization of Alloy B:
-
Nickel concentration in Alloy B .
-
Alloy Z must contain at least Nickel.
-
Since Alloy B contains less than Nickel, it must be combined with an alloy having strictly more than Nickel.
-
To maximize the proportion of Alloy B, we must blend it with the alloy that has the highest possible concentration of Nickel, which is Alloy C ( Nickel).
Let be the mass fraction of Alloy B in the blend with Alloy C:
Therefore, the percentage of Alloy B in Alloy Z cannot exceed 80.00%.
Question 61 · CAT Level
Directions for Questions 61 to 64
Answer the questions on the basis of the information given below.
The table below provides total population, sex ratio (Male : Female), overall literacy rate, and the number of literate females across eight sovereign territories for the census year 2024.
| Territory | Population (in Lakh) | Male : Female Ratio | Literacy Rate | Number of Literate Females (in Lakh) |
|---|---|---|---|---|
| Territory 1 | 600 | 3 : 2 | 72% | 210 |
| Territory 2 | 400 | 5 : 3 | 82% | 135 |
| Territory 3 | 650 | 7 : 6 | 64% | 195 |
| Territory 4 | 360 | 5 : 4 | 65% | 105 |
| Territory 5 | 450 | 5 : 4 | 84% | 175 |
| Territory 6 | 540 | 5 : 4 | 88% | 190 |
| Territory 7 | 250 | 3 : 2 | 94% | 92 |
| Territory 8 | 350 | 4 : 3 | 86% | 125 |
The table below provides the aggregate age-wise percentage distribution of males and females across the eight territories taken together in the same census year:
| Age Bracket ($x$) | Male Distribution (%) | Female Distribution (%) |
|---|---|---|
| $x \le 25\text{ years}$ | 58% | 55% |
| $25 < x \le 40\text{ years}$ | 22% | 18% |
| $40 < x \le 60\text{ years}$ | 12% | 16% |
| $60 < x \le 75\text{ years}$ | 5% | 7% |
| $x > 75\text{ years}$ | 3% | 4% |
The approximate value (in Lakhs) of the average number of literate males across the eight territories taken together was:
Show answer and explanation
Answer: (C) 197
Step-by-Step Census Tabulation:
Let us calculate the demographic figures for each territory (all figures in Lakhs):
| Territory | Total Pop | Males | Females | Total Literates | Literate Females | Literate Males | Female Literacy Rate |
|---|---|---|---|---|---|---|---|
| Territory 1 | 600 | 360 | 240 | 432.0 | 210 | 222.0 | 87.50% |
| Territory 2 | 400 | 250 | 150 | 328.0 | 135 | 193.0 | 90.00% |
| Territory 3 | 650 | 350 | 300 | 416.0 | 195 | 221.0 | 65.00% |
| Territory 4 | 360 | 200 | 160 | 234.0 | 105 | 129.0 | 65.62% |
| Territory 5 | 450 | 250 | 200 | 378.0 | 175 | 203.0 | 87.50% |
| Territory 6 | 540 | 300 | 240 | 475.2 | 190 | 285.2 | 79.17% |
| Territory 7 | 250 | 150 | 100 | 235.0 | 92 | 143.0 | 92.00% |
| Territory 8 | 350 | 200 | 150 | 301.0 | 125 | 176.0 | 83.33% |
| Total | 3,600 | 2,060 | 1,540 | 2,799.2 | 1,227 | 1,572.2 | 79.68% |
Solution for Q61:
Hence, the average is approximately 197 Lakh.
Question 62 · CAT Level
Directions for Questions 61 to 64
Answer the questions on the basis of the information given below.
The table below provides total population, sex ratio (Male : Female), overall literacy rate, and the number of literate females across eight sovereign territories for the census year 2024.
| Territory | Population (in Lakh) | Male : Female Ratio | Literacy Rate | Number of Literate Females (in Lakh) |
|---|---|---|---|---|
| Territory 1 | 600 | 3 : 2 | 72% | 210 |
| Territory 2 | 400 | 5 : 3 | 82% | 135 |
| Territory 3 | 650 | 7 : 6 | 64% | 195 |
| Territory 4 | 360 | 5 : 4 | 65% | 105 |
| Territory 5 | 450 | 5 : 4 | 84% | 175 |
| Territory 6 | 540 | 5 : 4 | 88% | 190 |
| Territory 7 | 250 | 3 : 2 | 94% | 92 |
| Territory 8 | 350 | 4 : 3 | 86% | 125 |
The table below provides the aggregate age-wise percentage distribution of males and females across the eight territories taken together in the same census year:
| Age Bracket ($x$) | Male Distribution (%) | Female Distribution (%) |
|---|---|---|
| $x \le 25\text{ years}$ | 58% | 55% |
| $25 < x \le 40\text{ years}$ | 22% | 18% |
| $40 < x \le 60\text{ years}$ | 12% | 16% |
| $60 < x \le 75\text{ years}$ | 5% | 7% |
| $x > 75\text{ years}$ | 3% | 4% |
What percentage (approximately) of the total population of all eight territories taken together was illiterate?
Show answer and explanation
Answer: (B) 22.24%
Step-by-Step Census Tabulation:
Let us calculate the demographic figures for each territory (all figures in Lakhs):
| Territory | Total Pop | Males | Females | Total Literates | Literate Females | Literate Males | Female Literacy Rate |
|---|---|---|---|---|---|---|---|
| Territory 1 | 600 | 360 | 240 | 432.0 | 210 | 222.0 | 87.50% |
| Territory 2 | 400 | 250 | 150 | 328.0 | 135 | 193.0 | 90.00% |
| Territory 3 | 650 | 350 | 300 | 416.0 | 195 | 221.0 | 65.00% |
| Territory 4 | 360 | 200 | 160 | 234.0 | 105 | 129.0 | 65.62% |
| Territory 5 | 450 | 250 | 200 | 378.0 | 175 | 203.0 | 87.50% |
| Territory 6 | 540 | 300 | 240 | 475.2 | 190 | 285.2 | 79.17% |
| Territory 7 | 250 | 150 | 100 | 235.0 | 92 | 143.0 | 92.00% |
| Territory 8 | 350 | 200 | 150 | 301.0 | 125 | 176.0 | 83.33% |
| Total | 3,600 | 2,060 | 1,540 | 2,799.2 | 1,227 | 1,572.2 | 79.68% |
Solution for Q62:
-
Total Population .
-
Total Literate Population .
-
Total Illiterate Population .
-
Overall Illiteracy Rate:
Hence, approximately 22.24% of the population was illiterate.
Question 63 · CAT Level
Directions for Questions 61 to 64
Answer the questions on the basis of the information given below.
The table below provides total population, sex ratio (Male : Female), overall literacy rate, and the number of literate females across eight sovereign territories for the census year 2024.
| Territory | Population (in Lakh) | Male : Female Ratio | Literacy Rate | Number of Literate Females (in Lakh) |
|---|---|---|---|---|
| Territory 1 | 600 | 3 : 2 | 72% | 210 |
| Territory 2 | 400 | 5 : 3 | 82% | 135 |
| Territory 3 | 650 | 7 : 6 | 64% | 195 |
| Territory 4 | 360 | 5 : 4 | 65% | 105 |
| Territory 5 | 450 | 5 : 4 | 84% | 175 |
| Territory 6 | 540 | 5 : 4 | 88% | 190 |
| Territory 7 | 250 | 3 : 2 | 94% | 92 |
| Territory 8 | 350 | 4 : 3 | 86% | 125 |
The table below provides the aggregate age-wise percentage distribution of males and females across the eight territories taken together in the same census year:
| Age Bracket ($x$) | Male Distribution (%) | Female Distribution (%) |
|---|---|---|
| $x \le 25\text{ years}$ | 58% | 55% |
| $25 < x \le 40\text{ years}$ | 22% | 18% |
| $40 < x \le 60\text{ years}$ | 12% | 16% |
| $60 < x \le 75\text{ years}$ | 5% | 7% |
| $x > 75\text{ years}$ | 3% | 4% |
A territory having at least 75% female literacy rate is placed in 'Group A' by the federal development commission. How many territories, out of the eight territories, are placed in 'Group A'?
Show answer and explanation
Answer: (C) 6
Step-by-Step Census Tabulation:
Let us calculate the demographic figures for each territory (all figures in Lakhs):
| Territory | Total Pop | Males | Females | Total Literates | Literate Females | Literate Males | Female Literacy Rate |
|---|---|---|---|---|---|---|---|
| Territory 1 | 600 | 360 | 240 | 432.0 | 210 | 222.0 | 87.50% |
| Territory 2 | 400 | 250 | 150 | 328.0 | 135 | 193.0 | 90.00% |
| Territory 3 | 650 | 350 | 300 | 416.0 | 195 | 221.0 | 65.00% |
| Territory 4 | 360 | 200 | 160 | 234.0 | 105 | 129.0 | 65.62% |
| Territory 5 | 450 | 250 | 200 | 378.0 | 175 | 203.0 | 87.50% |
| Territory 6 | 540 | 300 | 240 | 475.2 | 190 | 285.2 | 79.17% |
| Territory 7 | 250 | 150 | 100 | 235.0 | 92 | 143.0 | 92.00% |
| Territory 8 | 350 | 200 | 150 | 301.0 | 125 | 176.0 | 83.33% |
| Total | 3,600 | 2,060 | 1,540 | 2,799.2 | 1,227 | 1,572.2 | 79.68% |
Solution for Q63:
Female literacy rate in each territory:
-
Territory 1: → Group A (1)
-
Territory 2: → Group A (2)
-
Territory 3: → No
-
Territory 4: → No
-
Territory 5: → Group A (3)
-
Territory 6: → Group A (4)
-
Territory 7: → Group A (5)
-
Territory 8: → Group A (6)
Exactly 6 territories qualify for Group A.
Question 64 · CAT Level
Directions for Questions 61 to 64
Answer the questions on the basis of the information given below.
The table below provides total population, sex ratio (Male : Female), overall literacy rate, and the number of literate females across eight sovereign territories for the census year 2024.
| Territory | Population (in Lakh) | Male : Female Ratio | Literacy Rate | Number of Literate Females (in Lakh) |
|---|---|---|---|---|
| Territory 1 | 600 | 3 : 2 | 72% | 210 |
| Territory 2 | 400 | 5 : 3 | 82% | 135 |
| Territory 3 | 650 | 7 : 6 | 64% | 195 |
| Territory 4 | 360 | 5 : 4 | 65% | 105 |
| Territory 5 | 450 | 5 : 4 | 84% | 175 |
| Territory 6 | 540 | 5 : 4 | 88% | 190 |
| Territory 7 | 250 | 3 : 2 | 94% | 92 |
| Territory 8 | 350 | 4 : 3 | 86% | 125 |
The table below provides the aggregate age-wise percentage distribution of males and females across the eight territories taken together in the same census year:
| Age Bracket ($x$) | Male Distribution (%) | Female Distribution (%) |
|---|---|---|
| $x \le 25\text{ years}$ | 58% | 55% |
| $25 < x \le 40\text{ years}$ | 22% | 18% |
| $40 < x \le 60\text{ years}$ | 12% | 16% |
| $60 < x \le 75\text{ years}$ | 5% | 7% |
| $x > 75\text{ years}$ | 3% | 4% |
By what approximate percentage was the number of total males in the age bracket '25 < x <= 40' greater than the number of total females in the same age bracket across all eight territories taken together?
Show answer and explanation
Answer: (C) 63.49%
Step-by-Step Census Tabulation:
Let us calculate the demographic figures for each territory (all figures in Lakhs):
| Territory | Total Pop | Males | Females | Total Literates | Literate Females | Literate Males | Female Literacy Rate |
|---|---|---|---|---|---|---|---|
| Territory 1 | 600 | 360 | 240 | 432.0 | 210 | 222.0 | 87.50% |
| Territory 2 | 400 | 250 | 150 | 328.0 | 135 | 193.0 | 90.00% |
| Territory 3 | 650 | 350 | 300 | 416.0 | 195 | 221.0 | 65.00% |
| Territory 4 | 360 | 200 | 160 | 234.0 | 105 | 129.0 | 65.62% |
| Territory 5 | 450 | 250 | 200 | 378.0 | 175 | 203.0 | 87.50% |
| Territory 6 | 540 | 300 | 240 | 475.2 | 190 | 285.2 | 79.17% |
| Territory 7 | 250 | 150 | 100 | 235.0 | 92 | 143.0 | 92.00% |
| Territory 8 | 350 | 200 | 150 | 301.0 | 125 | 176.0 | 83.33% |
| Total | 3,600 | 2,060 | 1,540 | 2,799.2 | 1,227 | 1,572.2 | 79.68% |
Solution for Q64:
-
Total Males across all 8 territories .
-
Total Females across all 8 territories .
From the age distribution table:
-
Males in age group :
-
Females in age group :
Percentage excess of males over females:
Hence, the number of males was greater by approximately 63.49%.
Try real CAT questions
Study this concept with interactive practice in PrepSoc.
Open the concept library