Free CAT library

Practice Exercise 1 (45 Questions)

45 comprehensive practice questions on sports tournaments, relative speed geometry, knockout and round-robin structures, game theory minimax, logic alternators, and optimization.

Overview

Practice Exercise 1 features advanced reasoning and data interpretation problem sets centered on sports, competitive racing, tournament brackets, and operational optimization. Key archetypes include:

  1. Relative Velocity & Closed Tracks: Analyzing concentric loops and polygon circuits using relative speed vectors, boundary constraints, and observer vantage points.

  2. Tournament Structures & Scheduling: Single round-robin tournaments, multi-conference inter-group pairings, knockout stages, and point systems.

  3. Score Sequences & Landau's Theorem: Determining minimum and maximum win thresholds for advancing teams in single round-robin brackets.

  4. Combinatorial Roster Selection: Role-constrained squad building with conditional dependencies and exclusion rules.

  5. Minimax & Strategic Game Theory: Alternating multi-stage grid partitioning games with maximizing and minimizing players.

  6. Formal Instruction Sequences: Boundary-clamped accumulator registers and instruction sequences.

  7. Logic Alternators: Interrogations involving synthetic truth-teller / liar alternators.

  8. Recursive Backward Induction: Multi-stage inventory sharing and reverse allocation algorithms.

  9. Linear Programming & Production Optimization: Multi-machine scheduling with bottleneck minimization and idle time optimization.

Practice questions

Question 1 · Foundation

Directions for Questions 1 to 4

Four hypercar prototypes—Apex-A, Apex-B, Apex-C, and Apex-D—are undergoing high-speed telemetry calibration on a closed test circuit. The test zone features two concentric circular test tracks passing through optical sensor gate PP and optical sensor gate QQ, and a square perimeter track passing through checkpoints RR and SS, all centered around central telemetry control tower OO.

Track TypeSensor CheckpointsGeometry Relative to Control Tower $O$
Inner & Outer Circular TracksGate $P$ (inner), Gate $Q$ (outer)Concentric circles centered at $O$
Square Perimeter TrackCheckpoint $R$, Checkpoint $S$Symmetric square perimeter centered at $O$

Calibration System Specifications:

  1. The prototypes operate in autonomous sensor-blind mode: on-board telemetry does not report absolute ground speed or whether the vehicle is stationary.

  2. When two or more prototypes are moving parallel to each other along tangent test lines, the optical proximity sensors measure the relative speed of the other prototypes with respect to their own vehicle.

  3. Prototypes maintain a constant speed along their closed loops in either a clockwise or anticlockwise direction around central control tower OO.

When Apex-B passed through sensor gate PP, its telemetry logged the following simultaneous readings at that instant:

  • Apex-A passed through sensor gate QQ at a relative speed of 60 mph with respect to Apex-B.

  • Apex-C passed through checkpoint RR and Apex-D passed through checkpoint SS.

  • Apex-C and Apex-D were moving in the same direction at that instant, with relative speeds of 50 mph and 70 mph respectively with respect to Apex-B.

If Apex-A, Apex-B, Apex-C, and Apex-D were all moving in a clockwise direction and Apex-B's speed was 20 mph, what was the ratio of the speeds of Apex-A, Apex-B, Apex-C, and Apex-D?

  1. A

    4 : 2 : 3 : 9

  2. B

    3 : 2 : 2 : 8

  3. C

    4 : 2 : 2 : 7

  4. D

    5 : 2 : 3 : 8

Show answer and explanation

Answer: (A) 4 : 2 : 3 : 9

Step-by-Step Deduction:

  1. Concentric Circular Tracks (PP and QQ):

    • When both cars move clockwise, their linear velocity vectors at opposite tangent points are directed in opposite linear directions.

    • Therefore, the relative speed measured by Apex-B is given by: Va+Vb=60V_a + V_b = 60.

    • Given Vb=20 mphV_b = 20\text{ mph}, we have Va=60−20=40 mphV_a = 60 - 20 = 40\text{ mph}.

  2. Square Perimeter Track (RR and SS):

    • Both Apex-C and Apex-D move clockwise.

    • Along the parallel edges of the track relative to Apex-B:

      • For Apex-C: Vb+Vc=50  ⟹  20+Vc=50  ⟹  Vc=30 mphV_b + V_c = 50 \implies 20 + V_c = 50 \implies V_c = 30\text{ mph}.

      • For Apex-D: Vd−Vb=70  ⟹  Vd−20=70  ⟹  Vd=90 mphV_d - V_b = 70 \implies V_d - 20 = 70 \implies V_d = 90\text{ mph}.

  3. Ratio of Speeds:

    Va:Vb:Vc:Vd=40:20:30:90=4:2:3:9V_a : V_b : V_c : V_d = 40 : 20 : 30 : 90 = 4 : 2 : 3 : 9

Hence, the correct ratio is 4 : 2 : 3 : 9.

Question 2 · Foundation

Directions for Questions 1 to 4

Four hypercar prototypes—Apex-A, Apex-B, Apex-C, and Apex-D—are undergoing high-speed telemetry calibration on a closed test circuit. The test zone features two concentric circular test tracks passing through optical sensor gate PP and optical sensor gate QQ, and a square perimeter track passing through checkpoints RR and SS, all centered around central telemetry control tower OO.

Track TypeSensor CheckpointsGeometry Relative to Control Tower $O$
Inner & Outer Circular TracksGate $P$ (inner), Gate $Q$ (outer)Concentric circles centered at $O$
Square Perimeter TrackCheckpoint $R$, Checkpoint $S$Symmetric square perimeter centered at $O$

Calibration System Specifications:

  1. The prototypes operate in autonomous sensor-blind mode: on-board telemetry does not report absolute ground speed or whether the vehicle is stationary.

  2. When two or more prototypes are moving parallel to each other along tangent test lines, the optical proximity sensors measure the relative speed of the other prototypes with respect to their own vehicle.

  3. Prototypes maintain a constant speed along their closed loops in either a clockwise or anticlockwise direction around central control tower OO.

When Apex-B passed through sensor gate PP, its telemetry logged the following simultaneous readings at that instant:

  • Apex-A passed through sensor gate QQ at a relative speed of 60 mph with respect to Apex-B.

  • Apex-C passed through checkpoint RR and Apex-D passed through checkpoint SS.

  • Apex-C and Apex-D were moving in the same direction at that instant, with relative speeds of 50 mph and 70 mph respectively with respect to Apex-B.

If both Apex-A and Apex-B were moving in the clockwise direction, what could be the possible value of the average of the speeds of these four hypercar prototypes?

  1. A

    32.5 mph

  2. B

    45.0 mph

  3. C

    28.5 mph

  4. D

    52.5 mph

Show answer and explanation

Answer: (B) 45.0 mph

Step-by-Step Deduction:

  1. Since Apex-A and Apex-B both move clockwise, their relative linear motion yields:

    Va+Vb=60…(1)V_a + V_b = 60 \quad \dots (1)

  2. Case I: Apex-C and Apex-D both move in the anticlockwise direction:

    • Telemetry relations with respect to Apex-B:

      ∣Vc−Vb∣=50  ⟹  Vc−Vb=±50…(2)|V_c - V_b| = 50 \implies V_c - V_b = \pm 50 \quad \dots (2)

      Vb+Vd=70…(3)V_b + V_d = 70 \quad \dots (3)

    • Summing equations (1), (2), and (3):

      Va+Vb+Vc+Vd=60+(Vb±50)+(70−Vb)=130±50V_a + V_b + V_c + V_d = 60 + (V_b \pm 50) + (70 - V_b) = 130 \pm 50

      • When +50+50: Sum =180  ⟹  Average=1804=45.0 mph= 180 \implies \text{Average} = \frac{180}{4} = 45.0\text{ mph}.

      • When −50-50: Sum =80  ⟹  Average=804=20.0 mph= 80 \implies \text{Average} = \frac{80}{4} = 20.0\text{ mph}.

  3. Case II: Apex-C and Apex-D both move in the clockwise direction:

    • Vb+Vc=50…(4)V_b + V_c = 50 \quad \dots (4)

    • Vd−Vb=±70…(5)V_d - V_b = \pm 70 \quad \dots (5)

    • Summing equations (1), (4), and (5):

      Va+Vb+Vc+Vd=60+(50−Vb)+(Vb±70)=110±70V_a + V_b + V_c + V_d = 60 + (50 - V_b) + (V_b \pm 70) = 110 \pm 70

      • With +70+70: Sum =180  ⟹  Average=45.0 mph= 180 \implies \text{Average} = 45.0\text{ mph}.

      • With −70-70: Sum =40  ⟹  Vc+Vd=−20= 40 \implies V_c + V_d = -20, which is impossible since speeds must be non-negative.

Thus, the only valid possible average speeds are 45.0 mph or 20.0 mph. Among the choices, 45.0 mph is present.

Question 3 · Foundation

Directions for Questions 1 to 4

Four hypercar prototypes—Apex-A, Apex-B, Apex-C, and Apex-D—are undergoing high-speed telemetry calibration on a closed test circuit. The test zone features two concentric circular test tracks passing through optical sensor gate PP and optical sensor gate QQ, and a square perimeter track passing through checkpoints RR and SS, all centered around central telemetry control tower OO.

Track TypeSensor CheckpointsGeometry Relative to Control Tower $O$
Inner & Outer Circular TracksGate $P$ (inner), Gate $Q$ (outer)Concentric circles centered at $O$
Square Perimeter TrackCheckpoint $R$, Checkpoint $S$Symmetric square perimeter centered at $O$

Calibration System Specifications:

  1. The prototypes operate in autonomous sensor-blind mode: on-board telemetry does not report absolute ground speed or whether the vehicle is stationary.

  2. When two or more prototypes are moving parallel to each other along tangent test lines, the optical proximity sensors measure the relative speed of the other prototypes with respect to their own vehicle.

  3. Prototypes maintain a constant speed along their closed loops in either a clockwise or anticlockwise direction around central control tower OO.

When Apex-B passed through sensor gate PP, its telemetry logged the following simultaneous readings at that instant:

  • Apex-A passed through sensor gate QQ at a relative speed of 60 mph with respect to Apex-B.

  • Apex-C passed through checkpoint RR and Apex-D passed through checkpoint SS.

  • Apex-C and Apex-D were moving in the same direction at that instant, with relative speeds of 50 mph and 70 mph respectively with respect to Apex-B.

If Apex-A drove in the clockwise direction and Apex-B in the anticlockwise direction, and Apex-C observed that Apex-D's speed was 20 mph with respect to him, what could be the speed of prototype Apex-B?

  1. A

    85 mph

  2. B

    60 mph

  3. C

    42 mph

  4. D

    78 mph

Show answer and explanation

Answer: (B) 60 mph

Step-by-Step Deduction:

  1. Apex-C observes Apex-D moving at 20 mph relative to him. Since both Apex-C and Apex-D move in the same direction, we have:

    Vc+Vd=20V_c + V_d = 20

    Since speeds are non-negative, this implies 0≤Vc≤200 \le V_c \le 20 and 0≤Vd≤200 \le V_d \le 20.

  2. Case I: Both Apex-C and Apex-D move clockwise:

    • With respect to Apex-B:

      Vb−Vc=50  ⟹  Vb=Vc+50V_b - V_c = 50 \implies V_b = V_c + 50

      Since Vc≥0V_c \ge 0, Vb≥50 mphV_b \ge 50\text{ mph}.

    • And:

      Vb+Vd=70  ⟹  Vb=70−VdV_b + V_d = 70 \implies V_b = 70 - V_d

      Since Vd≥0V_d \ge 0 and Vd≤20V_d \le 20, Vb≤70 mphV_b \le 70\text{ mph}.

    • Combining both bounds:

      50≤Vb≤70 mph50 \le V_b \le 70\text{ mph}

  3. Checking the options:

    • (1) 85 mph (outside [50,70][50, 70])

    • (2) 60 mph (within [50,70][50, 70])

    • (3) 42 mph (outside [50,70][50, 70])

    • (4) 78 mph (outside [50,70][50, 70])

Therefore, the only possible speed for driver Apex-B is 60 mph.

Question 4 · Foundation

Directions for Questions 1 to 4

Four hypercar prototypes—Apex-A, Apex-B, Apex-C, and Apex-D—are undergoing high-speed telemetry calibration on a closed test circuit. The test zone features two concentric circular test tracks passing through optical sensor gate PP and optical sensor gate QQ, and a square perimeter track passing through checkpoints RR and SS, all centered around central telemetry control tower OO.

Track TypeSensor CheckpointsGeometry Relative to Control Tower $O$
Inner & Outer Circular TracksGate $P$ (inner), Gate $Q$ (outer)Concentric circles centered at $O$
Square Perimeter TrackCheckpoint $R$, Checkpoint $S$Symmetric square perimeter centered at $O$

Calibration System Specifications:

  1. The prototypes operate in autonomous sensor-blind mode: on-board telemetry does not report absolute ground speed or whether the vehicle is stationary.

  2. When two or more prototypes are moving parallel to each other along tangent test lines, the optical proximity sensors measure the relative speed of the other prototypes with respect to their own vehicle.

  3. Prototypes maintain a constant speed along their closed loops in either a clockwise or anticlockwise direction around central control tower OO.

When Apex-B passed through sensor gate PP, its telemetry logged the following simultaneous readings at that instant:

  • Apex-A passed through sensor gate QQ at a relative speed of 60 mph with respect to Apex-B.

  • Apex-C passed through checkpoint RR and Apex-D passed through checkpoint SS.

  • Apex-C and Apex-D were moving in the same direction at that instant, with relative speeds of 50 mph and 70 mph respectively with respect to Apex-B.

One out of Apex-A and Apex-B drove in the clockwise direction and the other in the anticlockwise direction. At the same instant when Apex-B passed through gate PP, an observer EE stationed at central tower OO observed that Apex-C and Apex-D had the exact same ground speed with respect to OO. Which of the following could also be observed by EE?

  1. A

    Three of these four cars had a speed of 25 mph.

  2. B

    Three of these four cars had a speed of 70 mph.

  3. C

    Apex-A's car was moving at exactly double the speed of either Apex-C's or Apex-D's car.

  4. D

    Apex-A's car was moving at more than double the speed of Apex-B's car.

Show answer and explanation

Answer: (D) Apex-A's car was moving at more than double the speed of Apex-B's car.

Step-by-Step Deduction:

  1. Since observer EE is stationary at control tower OO, speeds measured by EE are the true absolute ground speeds.

  2. Let the common speed of Apex-C and Apex-D be VV (Vc=Vd=VV_c = V_d = V).

  3. One of A and B is clockwise, the other anticlockwise, so they move in the same linear direction:

    ∣Va−Vb∣=60  ⟹  Va−Vb=±60…(1)|V_a - V_b| = 60 \implies V_a - V_b = \pm 60 \quad \dots (1)

  4. From relative speeds of C and D with respect to B:

    Vb+V=70…(2)V_b + V = 70 \quad \dots (2)

    ∣V−Vb∣=50  ⟹  V−Vb=±50…(3)|V - V_b| = 50 \implies V - V_b = \pm 50 \quad \dots (3)

  5. Adding equations (2) and (3):

    2V=70±50  ⟹  2V=120 or 20  ⟹  V=60 mph or 10 mph2V = 70 \pm 50 \implies 2V = 120 \text{ or } 20 \implies V = 60\text{ mph} \text{ or } 10\text{ mph}

  6. If V=60 mphV = 60\text{ mph}:

    • From (2): Vb=70−60=10 mphV_b = 70 - 60 = 10\text{ mph}.

    • From (1): Va=10±60  ⟹  Va=70 mphV_a = 10 \pm 60 \implies V_a = 70\text{ mph} (since speed cannot be negative, −50-50 is discarded).

    • This gives the speed tuple: (Va,Vb,Vc,Vd)=(70,10,60,60)(V_a, V_b, V_c, V_d) = (70, 10, 60, 60).

    • In this case, Va=70 mphV_a = 70\text{ mph} and Vb=10 mphV_b = 10\text{ mph}. Since 70>2×10=2070 > 2 \times 10 = 20, Apex-A's speed is more than double Apex-B's speed!

  7. If V=10 mphV = 10\text{ mph}:

    • From (2): Vb=70−10=60 mphV_b = 70 - 10 = 60\text{ mph}.

    • From (1): Va=60±60  ⟹  Va=120 mph or 0 mphV_a = 60 \pm 60 \implies V_a = 120\text{ mph} \text{ or } 0\text{ mph}.

    • Tuples: (120,60,10,10)(120, 60, 10, 10) or (0,60,10,10)(0, 60, 10, 10).

Comparing with the options, only statement (4) accurately describes a valid configuration.

Question 5 · Foundation

Directions for Questions 5 to 7

Sixteen elite esports teams—named Team A through Team P—participated in Round 1 of the Global Esports Invitational (Tactical Shooter Championship). The teams were divided into two conferences—Conference X and Conference Y—with exactly eight teams in each conference. A total of eight matches were played in Round 1 such that every team played exactly one match against an opponent from the other conference.

Tournament Schedule & Pairing Constraints:

  1. The matches were numbered 1 to 8 according to the chronological order in which they were played.

  2. Teams A, H, and L belonged to the same conference. Similarly, Teams M, J, and E belonged to the same conference.

  3. Team H was in Conference X.

  4. Team P was in Conference Y and played against Team F.

  5. Match 6 was played between Team M and Team C; Match 8 was played between Team H and Team J.

  6. Team D was not in the conference containing Teams C, K, and O. Team G was not in the conference containing Teams B, N, and I.

  7. Team B played its match before Team P's match and immediately after Team I's match.

  8. Team G played in Match 1, and Team K played in Match 2.

  9. Team L did not play in Match 1, Match 3, Match 5, or Match 7.

If Team D and Team F played in Match 1 and Match 5 respectively, then Team B played against:

  1. A

    Team A

  2. B

    Team L

  3. C

    Team O

  4. D

    Either Team A, Team L, or Team O

Show answer and explanation

Answer: (D) Either Team A, Team L, or Team O

Step-by-Step Deduction:

  1. Conference Allocation:

    • From (3), Team H is in Conference X.

    • From (2), Teams A, H, and L are in Conference X.

    • From (5), Match 8 is between H (in X) and J. Thus, Team J is in Conference Y.

    • From (2), Teams M, J, and E are in Conference Y.

    • From (5), Match 6 is between M (in Y) and C. Thus, Team C is in Conference X.

    • From (4), Team P is in Conference Y and plays F. Thus, Team F is in Conference X.

    • From (6), Team D is not with C, K, O. Since C is in X, C, K, O are in Conference X and D is in Conference Y.

    • Teams in X so far: {A, H, L, C, F, K, O} (7 teams).

    • Teams in Y so far: {M, J, E, P, D} (5 teams).

    • From (6), G is not with {B, N, I}. Since X needs 1 team and Y needs 3 teams, G is in Conference X, while B, N, and I are in Conference Y.

    • Conference X: {A, C, F, G, H, K, L, O}

    • Conference Y: {B, D, E, I, J, M, N, P}

  2. Match Slot Analysis:

    • From (8), G is in Match 1 and K is in Match 2.

    • From (9), L cannot play in 1, 3, 5, 7. Since 2, 6, 8 are taken by K, C, H respectively, Team L must play in Match 4.

    • If F plays in Match 5, then P also plays in Match 5 (from clue 4).

    • From (7), B plays before P (before Match 5) and immediately after I (Match B=Match I+1B = \text{Match } I + 1).

    • If D plays in Match 1, the Conference Y team in Match 1 is D. Thus, Match I cannot be 1.

    • Thus, (I,B)(I, B) can be (2,3)(2, 3) or (3,4)(3, 4):

      • If Match B=4B = 4, B plays against L.

      • If Match B=3B = 3, the Conference X team in Match 3 can be either A or O (since F is in Match 5).

    • Therefore, Team B could have played against Team A, Team L, or Team O.

Question 6 · Foundation

Directions for Questions 5 to 7

Sixteen elite esports teams—named Team A through Team P—participated in Round 1 of the Global Esports Invitational (Tactical Shooter Championship). The teams were divided into two conferences—Conference X and Conference Y—with exactly eight teams in each conference. A total of eight matches were played in Round 1 such that every team played exactly one match against an opponent from the other conference.

Tournament Schedule & Pairing Constraints:

  1. The matches were numbered 1 to 8 according to the chronological order in which they were played.

  2. Teams A, H, and L belonged to the same conference. Similarly, Teams M, J, and E belonged to the same conference.

  3. Team H was in Conference X.

  4. Team P was in Conference Y and played against Team F.

  5. Match 6 was played between Team M and Team C; Match 8 was played between Team H and Team J.

  6. Team D was not in the conference containing Teams C, K, and O. Team G was not in the conference containing Teams B, N, and I.

  7. Team B played its match before Team P's match and immediately after Team I's match.

  8. Team G played in Match 1, and Team K played in Match 2.

  9. Team L did not play in Match 1, Match 3, Match 5, or Match 7.

If Team A played against Team I, then Team O could have played its match against how many teams?

  1. A

    2

  2. B

    3

  3. C

    4

  4. D

    5

Show answer and explanation

Answer: (B) 3

Step-by-Step Deduction:

  1. Team A is in Conference X and Team I is in Conference Y. Teams A and I played against each other in the same match.

  2. In Conference X, teams allocated to fixed matches are:

    • Match 1: G

    • Match 2: K

    • Match 4: L

    • Match 6: C

    • Match 8: H

    Remaining open matches for Conference X are Matches 3, 5, and 7, which must be shared among Teams A, F, and O.

  3. Team B must play immediately after Team I (Match B=Match I+1B = \text{Match } I + 1) and before Team P (Match B<Match PB < \text{Match } P):

    • If Match I=5I = 5, Match B=6B = 6, but Match 6 already has Team M from Conference Y! (Impossible)

    • If Match I=7I = 7, Match B=8B = 8, but Match 8 already has Team J from Conference Y! (Impossible)

    • Therefore, Match I=3I = 3, which means Match 3 is Team A vs Team I.

  4. Consequently, Match B=4B = 4 (so Team B plays against Team L).

  5. Since Match P>4P > 4, Team P (and opponent Team F) must play in Match 5 or Match 7.

  6. Team O must therefore play in whichever match of {5, 7} is not taken by Team F.

  7. From Conference Y, the teams available for Match 1, Match 2, and the remaining slot for Team O are: Team D, Team E, and Team N.

    Therefore, Team O could have played against any of these 3 teams.

Question 7 · Foundation

Directions for Questions 5 to 7

Sixteen elite esports teams—named Team A through Team P—participated in Round 1 of the Global Esports Invitational (Tactical Shooter Championship). The teams were divided into two conferences—Conference X and Conference Y—with exactly eight teams in each conference. A total of eight matches were played in Round 1 such that every team played exactly one match against an opponent from the other conference.

Tournament Schedule & Pairing Constraints:

  1. The matches were numbered 1 to 8 according to the chronological order in which they were played.

  2. Teams A, H, and L belonged to the same conference. Similarly, Teams M, J, and E belonged to the same conference.

  3. Team H was in Conference X.

  4. Team P was in Conference Y and played against Team F.

  5. Match 6 was played between Team M and Team C; Match 8 was played between Team H and Team J.

  6. Team D was not in the conference containing Teams C, K, and O. Team G was not in the conference containing Teams B, N, and I.

  7. Team B played its match before Team P's match and immediately after Team I's match.

  8. Team G played in Match 1, and Team K played in Match 2.

  9. Team L did not play in Match 1, Match 3, Match 5, or Match 7.

If Team A played against Team I, then which of the following statements was definitely true?

  1. A

    Team B played against Team L

  2. B

    Team M played its match before Team P's match

  3. C

    Neither statement (1) nor statement (2) is true

  4. D

    Both statement (1) and statement (2) are true

Show answer and explanation

Answer: (A) Team B played against Team L

Step-by-Step Deduction:

  1. As established in the deduction for Question 6, since Team A played against Team I:

    • Team A must play in Match 3 (the only odd slot before Match 6 and Match 8 whose successor slot is free in Conference Y).

    • Team I is in Match 3.

    • Team B plays immediately after Team I, so Team B is in Match 4.

  2. From clue (9), Team L cannot play in Matches 1, 3, 5, or 7. With Matches 2, 6, and 8 taken by K, C, and H respectively, Team L must play in Match 4.

  3. In Match 4, the Conference X representative is Team L and the Conference Y representative is Team B.

    Therefore, Team B definitely played against Team L.

  4. Regarding statement (2): Team P plays in Match 5 or Match 7. If Team P plays in Match 7, then Team M (Match 6) plays before Team P; but if Team P plays in Match 5, Team P plays before Team M. Hence, statement (2) is not definitely true.

Thus, only statement (1) is definitely true.

Question 8 · Foundation

Directions for Questions 8 to 10

Four esports organizations—Team T1, Team T2, Team T3, and Team T4—competed in the CyberStrike 4-Team Invitational (Spring Split). In the tournament, each team played exactly one match with each of the other three teams (single round-robin, 6 matches total). The matches took place on six consecutive days from Monday to Saturday (one match per day). Three points were awarded for a win and zero points for a loss. No match ended in a tie or draw.

Tournament Records:

  1. Team T1 won only one match in the tournament, and that match was played on Monday.

  2. The match played on Thursday was won by Team T4.

  3. Team T3 won against Team T2 on Tuesday.

  4. Teams T2, T3, and T4 definitely did not play on Wednesday, Monday, and Saturday respectively.

  5. Teams T2 and T3 ended up with the same total number of points at the end of the tournament.

How many points did Team T4 score in the tournament?

  1. A

    3

  2. B

    6

  3. C

    9

  4. D

    Cannot be determined

Show answer and explanation

Answer: (A) 3

Step-by-Step Deduction:

  1. Points Analysis:

    • Total matches = (42)=6\binom{4}{2} = 6. Each match yields 3 points to the winner, so total points awarded = 6×3=186 \times 3 = 18 points.

    • Team T1 won exactly one match, so T1 scored 1×3=31 \times 3 = 3 points.

    • Teams T2 and T3 ended with identical points. Since each played 3 matches, their win count could be either 1 win (3 pts each) or 2 wins (6 pts each).

      • If T2 and T3 had 1 win each (3 pts each): Then T4 must have won 6−(1+1+1)=36 - (1 + 1 + 1) = 3 matches (all matches). But T3 won against T2 on Tuesday, meaning T3 already has 1 win; if T4 won all its matches, T1 could only have won against T3 on Monday, which contradicts clue (4) stating T3 did not play on Monday! Hence this case is invalid.

      • Therefore, Teams T2 and T3 won 2 matches each (6 points each).

    • Team T4 must have won 6−(1+2+2)=16 - (1 + 2 + 2) = 1 match.

    • Therefore, Team T4 scored 1×3=31 \times 3 = \mathbf{3} points.

Question 9 · Foundation

Directions for Questions 8 to 10

Four esports organizations—Team T1, Team T2, Team T3, and Team T4—competed in the CyberStrike 4-Team Invitational (Spring Split). In the tournament, each team played exactly one match with each of the other three teams (single round-robin, 6 matches total). The matches took place on six consecutive days from Monday to Saturday (one match per day). Three points were awarded for a win and zero points for a loss. No match ended in a tie or draw.

Tournament Records:

  1. Team T1 won only one match in the tournament, and that match was played on Monday.

  2. The match played on Thursday was won by Team T4.

  3. Team T3 won against Team T2 on Tuesday.

  4. Teams T2, T3, and T4 definitely did not play on Wednesday, Monday, and Saturday respectively.

  5. Teams T2 and T3 ended up with the same total number of points at the end of the tournament.

Team T3 lost its match against:

  1. A

    Team T1

  2. B

    Team T2

  3. C

    Team T4

  4. D

    Both Team T1 and Team T2

Show answer and explanation

Answer: (C) Team T4

Step-by-Step Deduction:

  1. From Question 8, Team T3 won exactly 2 matches and lost 1 match.

  2. From clue (3), Team T3 defeated Team T2 on Tuesday.

  3. Clue (1) states Team T1 won only on Monday. Since Team T3 did not play on Monday (clue 4), Team T1 did not play against Team T3 on Monday.

    • Hence, Team T1 lost its match against Team T3 (played on Wednesday).
  4. Clue (2) states Team T4 won the match on Thursday.

    • Since Team T3 played on Thursday against Team T4, Team T4 defeated Team T3.
  5. Thus, Team T3 won against T2 and T1, and lost its match against Team T4.

Question 10 · Foundation

Directions for Questions 8 to 10

Four esports organizations—Team T1, Team T2, Team T3, and Team T4—competed in the CyberStrike 4-Team Invitational (Spring Split). In the tournament, each team played exactly one match with each of the other three teams (single round-robin, 6 matches total). The matches took place on six consecutive days from Monday to Saturday (one match per day). Three points were awarded for a win and zero points for a loss. No match ended in a tie or draw.

Tournament Records:

  1. Team T1 won only one match in the tournament, and that match was played on Monday.

  2. The match played on Thursday was won by Team T4.

  3. Team T3 won against Team T2 on Tuesday.

  4. Teams T2, T3, and T4 definitely did not play on Wednesday, Monday, and Saturday respectively.

  5. Teams T2 and T3 ended up with the same total number of points at the end of the tournament.

The match played on Friday was between:

  1. A

    Team T1 and Team T2

  2. B

    Team T2 and Team T3

  3. C

    Team T1 and Team T4

  4. D

    Team T2 and Team T4

Show answer and explanation

Answer: (D) Team T2 and Team T4

Complete Tournament Schedule Reconstruction:

DayMatch PlayedWinnerDeduction Rationale
MondayTeam T1 vs Team T4Team T1T1 won on Monday; T3 did not play Monday (clue 4)
TuesdayTeam T2 vs Team T3Team T3Given directly in clue 3
WednesdayTeam T1 vs Team T3Team T3T2 did not play Wednesday (clue 4); T1 lost
ThursdayTeam T3 vs Team T4Team T4T4 won on Thursday (clue 2); T3's remaining match
FridayTeam T2 vs Team T4Team T2T4 did not play Saturday (clue 4), so plays Friday; T2 won
SaturdayTeam T1 vs Team T2Team T2T4 did not play Saturday; T2 won to reach 2 wins

Hence, the match played on Friday was between Team T2 and Team T4.

Question 11 · Foundation

Directions for Questions 11 to 13

An elite 11-operator competitive roster is to be assembled from a candidate pool of 15 operators: A, B, C, D, E, F, G, H, I, J, K, L, M, N, and O.

Functional RoleCountCandidate Operators
Assault Specialists7A, D, K, L, M, N, O
Support / Recon Specialists6B, C, E, F, G, H
Tactical In-Game Leaders (IGLs)2I, J

Roster Selection Protocols:

  1. The final roster must contain at least 5 Assault Specialists and exactly 1 Tactical IGL.

  2. Operator H can be selected only if Operator B is selected (H  ⟹  BH \implies B).

  3. Operator F can be selected only if both Operator G and Operator N are selected (F  ⟹  G∧NF \implies G \land N).

  4. If Operator I is selected, then Operator F must also be selected (I  ⟹  FI \implies F).

  5. Operators K and M cannot both be selected for the roster. Similarly, Operators B and G cannot both be selected for the roster.

In how many different ways can the 11-operator squad be formed?

  1. A

    3

  2. B

    4

  3. C

    5

  4. D

    6

Show answer and explanation

Answer: (D) 6

Step-by-Step Deduction:

From clue (5), Operators B and G cannot be selected together. We evaluate two exhaustive branches:

  1. Branch 1: Operator B is selected (Operator G is not selected):

    • Since G is not selected, Operator F cannot be selected (clue 3: F  ⟹  G∧NF \implies G \land N).

    • Since F is not selected, Operator I cannot be selected (clue 4: I  ⟹  FI \implies F).

    • Thus, the Tactical IGL must be J (1 way).

    • Available Support/Recon operators without G and F are: {B, H, C, E} (all 4 must be selected to make 4 Support specialists).

    • Assault specialists needed =11−1 (IGL)−4 (Support)=6= 11 - 1\text{ (IGL)} - 4\text{ (Support)} = 6 Assault specialists.

    • Candidate Assault pool has 7 operators: A, D, L, N, O are unconditionally available (5 operators).

    • From {K, M}, exactly one can be chosen (2 choices: K or M).

    • Number of valid squads in Branch 1 =2×1×1=2= 2 \times 1 \times 1 = 2 squads.

  2. Branch 2: Operator G is selected (Operator B is not selected):

    • Since B is not selected, Operator H cannot be selected (clue 2: H  ⟹  BH \implies B).

    • Support operators available are {G, F, C, E} (all 4 selected).

    • Since F is selected, Operator N must be selected (clue 3), which is satisfied.

    • Tactical IGL can be either I or J (2 choices).

    • Assault specialists needed: 6 operators. From {A, D, L, N, O} all 5 are selected, plus exactly one of {K, M} (2 choices).

    • Number of valid squads in Branch 2 =2 (K or M)×2 (I or J)=4= 2\text{ (K or M)} \times 2\text{ (I or J)} = 4 squads.

  3. Total Valid Squad Formations:

    2+4=6 ways2 + 4 = 6\text{ ways}

Hence, exactly 6 different squads can be formed.

Question 12 · Foundation

Directions for Questions 11 to 13

An elite 11-operator competitive roster is to be assembled from a candidate pool of 15 operators: A, B, C, D, E, F, G, H, I, J, K, L, M, N, and O.

Functional RoleCountCandidate Operators
Assault Specialists7A, D, K, L, M, N, O
Support / Recon Specialists6B, C, E, F, G, H
Tactical In-Game Leaders (IGLs)2I, J

Roster Selection Protocols:

  1. The final roster must contain at least 5 Assault Specialists and exactly 1 Tactical IGL.

  2. Operator H can be selected only if Operator B is selected (H  ⟹  BH \implies B).

  3. Operator F can be selected only if both Operator G and Operator N are selected (F  ⟹  G∧NF \implies G \land N).

  4. If Operator I is selected, then Operator F must also be selected (I  ⟹  FI \implies F).

  5. Operators K and M cannot both be selected for the roster. Similarly, Operators B and G cannot both be selected for the roster.

If Operator G is one of the Support / Recon specialists in the squad, then who will be the Tactical IGL?

  1. A

    Operator J only

  2. B

    Operator I only

  3. C

    Either Operator I or Operator J

  4. D

    No such squad is possible

Show answer and explanation

Answer: (C) Either Operator I or Operator J

Step-by-Step Deduction:

  1. When Operator G is selected, Operator B is excluded (clue 5).

  2. Consequently, Operator H is excluded (clue 2).

  3. The 4 Support/Recon specialists must be {G, F, C, E}.

  4. Since Operator F is in the squad, Operator I is eligible to be selected (clue 4 does not restrict I when F is present).

  5. Operator J has no prerequisites and is always eligible.

  6. As proven in Branch 2 of Question 11, valid rosters exist with Tactical IGL = I, and with Tactical IGL = J.

Therefore, the Tactical IGL can be Either Operator I or Operator J.

Question 13 · Foundation

Directions for Questions 11 to 13

An elite 11-operator competitive roster is to be assembled from a candidate pool of 15 operators: A, B, C, D, E, F, G, H, I, J, K, L, M, N, and O.

Functional RoleCountCandidate Operators
Assault Specialists7A, D, K, L, M, N, O
Support / Recon Specialists6B, C, E, F, G, H
Tactical In-Game Leaders (IGLs)2I, J

Roster Selection Protocols:

  1. The final roster must contain at least 5 Assault Specialists and exactly 1 Tactical IGL.

  2. Operator H can be selected only if Operator B is selected (H  ⟹  BH \implies B).

  3. Operator F can be selected only if both Operator G and Operator N are selected (F  ⟹  G∧NF \implies G \land N).

  4. If Operator I is selected, then Operator F must also be selected (I  ⟹  FI \implies F).

  5. Operators K and M cannot both be selected for the roster. Similarly, Operators B and G cannot both be selected for the roster.

If Operator H is selected, then who among the following cannot be selected in the squad?

  1. A

    Operator O

  2. B

    Operator N

  3. C

    Operator G

  4. D

    Operator J

Show answer and explanation

Answer: (C) Operator G

Step-by-Step Deduction:

  1. According to selection rule (2), Operator H can be selected only if Operator B is selected.

  2. Thus, selecting H necessitates the selection of Operator B.

  3. According to rule (5), Operators B and G cannot both be selected for the roster.

  4. Because B is selected, Operator G is strictly prohibited from selection.

Hence, Operator G cannot be selected in the squad.

Question 14 · Foundation

Directions for Questions 14 to 17

Four franchise teams—Team T1, Team T2, Team T3, and Team T4—participated in the Overwatch 2 Champions Brawl (Championship Final Stage). In this tournament, each team played exactly one match with each of the other teams across six consecutive matchdays from Monday to Saturday (one match per day). Four points were awarded to the winner of each match and zero points to the loser. No match resulted in a tie or draw.

Matchday Log:

  1. Team T1 won only one match in the tournament, and that match was played on Monday.

  2. The match played on Thursday was won by Team T4.

  3. Team T3 won against Team T2 on Tuesday.

  4. Teams T2, T3, and T4 definitely did not play on Wednesday, Monday, and Saturday respectively.

  5. Teams T2 and T3 ended up with the same total number of points at the end of the tournament.

How many points did Team T4 score in the tournament?

  1. A

    4

  2. B

    8

  3. C

    12

  4. D

    Cannot be determined

Show answer and explanation

Answer: (A) 4

Step-by-Step Deduction:

  1. With 4 points per win, total points across all 6 matches =6×4=24= 6 \times 4 = 24 points.

  2. Team T1 won exactly one match, scoring 1×4=41 \times 4 = 4 points.

  3. Teams T2 and T3 scored identical points, so each won 2 matches (2×4=82 \times 4 = 8 points each):

    • If each won 1 match, T4 would have won all 3 matches, which contradicts T1 winning on Monday while T3 was absent.
  4. Total wins by T1, T2, T3 =1+2+2=5= 1 + 2 + 2 = 5 wins.

  5. Thus, Team T4 won exactly 6−5=16 - 5 = 1 match.

  6. Points scored by Team T4 =1×4=4= 1 \times 4 = \mathbf{4} points.

Question 15 · Foundation

Directions for Questions 14 to 17

Four franchise teams—Team T1, Team T2, Team T3, and Team T4—participated in the Overwatch 2 Champions Brawl (Championship Final Stage). In this tournament, each team played exactly one match with each of the other teams across six consecutive matchdays from Monday to Saturday (one match per day). Four points were awarded to the winner of each match and zero points to the loser. No match resulted in a tie or draw.

Matchday Log:

  1. Team T1 won only one match in the tournament, and that match was played on Monday.

  2. The match played on Thursday was won by Team T4.

  3. Team T3 won against Team T2 on Tuesday.

  4. Teams T2, T3, and T4 definitely did not play on Wednesday, Monday, and Saturday respectively.

  5. Teams T2 and T3 ended up with the same total number of points at the end of the tournament.

Team T3 lost its match against:

  1. A

    Team T1

  2. B

    Team T2

  3. C

    Team T4

  4. D

    Both Team T1 and Team T2

Show answer and explanation

Answer: (C) Team T4

Step-by-Step Deduction:

  1. Team T3 won 2 matches (against T2 on Tuesday, and against T1 on Wednesday).

  2. Team T3 played on Thursday against Team T4.

  3. Clue (2) states that Team T4 won the Thursday match.

  4. Therefore, Team T3 lost its match against Team T4.

Question 16 · Moderate

Directions for Questions 14 to 17

Four franchise teams—Team T1, Team T2, Team T3, and Team T4—participated in the Overwatch 2 Champions Brawl (Championship Final Stage). In this tournament, each team played exactly one match with each of the other teams across six consecutive matchdays from Monday to Saturday (one match per day). Four points were awarded to the winner of each match and zero points to the loser. No match resulted in a tie or draw.

Matchday Log:

  1. Team T1 won only one match in the tournament, and that match was played on Monday.

  2. The match played on Thursday was won by Team T4.

  3. Team T3 won against Team T2 on Tuesday.

  4. Teams T2, T3, and T4 definitely did not play on Wednesday, Monday, and Saturday respectively.

  5. Teams T2 and T3 ended up with the same total number of points at the end of the tournament.

The match played on Friday was between:

  1. A

    Team T1 and Team T2

  2. B

    Team T2 and Team T3

  3. C

    Team T1 and Team T4

  4. D

    Team T2 and Team T4

Show answer and explanation

Answer: (D) Team T2 and Team T4

Schedule Breakdown:

  • Monday: T1 vs T4 (Winner: T1)

  • Tuesday: T2 vs T3 (Winner: T3)

  • Wednesday: T1 vs T3 (Winner: T3)

  • Thursday: T3 vs T4 (Winner: T4)

  • Friday: T2 vs T4 (Winner: T2)

  • Saturday: T1 vs T2 (Winner: T2)

Hence, the Friday match was contested between Team T2 and Team T4.

Question 17 · Moderate

Directions for Questions 14 to 17

Four franchise teams—Team T1, Team T2, Team T3, and Team T4—participated in the Overwatch 2 Champions Brawl (Championship Final Stage). In this tournament, each team played exactly one match with each of the other teams across six consecutive matchdays from Monday to Saturday (one match per day). Four points were awarded to the winner of each match and zero points to the loser. No match resulted in a tie or draw.

Matchday Log:

  1. Team T1 won only one match in the tournament, and that match was played on Monday.

  2. The match played on Thursday was won by Team T4.

  3. Team T3 won against Team T2 on Tuesday.

  4. Teams T2, T3, and T4 definitely did not play on Wednesday, Monday, and Saturday respectively.

  5. Teams T2 and T3 ended up with the same total number of points at the end of the tournament.

Who won the match played on Thursday?

  1. A

    Team T1

  2. B

    Team T2

  3. C

    Team T3

  4. D

    Team T4

Show answer and explanation

Answer: (D) Team T4

Step-by-Step Deduction:

  1. Clue (2) explicitly records: "The match played on Thursday was won by Team T4."

  2. This match was between Team T3 and Team T4, and the victor was Team T4.

Question 18 · Moderate

Directions for Questions 18 to 21

Sixteen elite esports teams—named Team A through Team P—participated in the Dota 2 Champions League. The tournament was conducted in two distinct stages:

  • Stage 1 (Group Stage): The sixteen teams were divided into two groups of eight: Teams A to H in Group 1, and Teams I to P in Group 2. Each team in a group played exactly one match against every other team in that group (7 matches per team; 28 matches total per group). At the conclusion of Stage 1, the top four teams from each group advanced to Stage 2, while the remaining teams were eliminated.

  • Stage 2 (Championship Knockout): Stage 2 comprised three single-elimination rounds—Quarterfinals, Semifinals, and the Grand Final. Each round involved a single match for each participating team. The winner advanced to the next round, while the loser was eliminated. The team remaining undefeated in Stage 2 was crowned the Tournament Champion.

At the end of Stage 1, group ranks were determined by total wins. Ties were resolved by standard tie-breaking rules. The qualifying teams from Group 1 were Teams A, B, C, and D; the qualifying teams from Group 2 were Teams I, J, K, and L. No match in the tournament ended in a draw.

In the tournament, if Team E and Team L won the same total number of matches across the entire tournament and Team L was the tournament champion, then what was the sum of the total number of matches won by Team E and that by Team L?

  1. A

    10

  2. B

    9

  3. C

    8

  4. D

    7

Show answer and explanation

Answer: (A) 10

Step-by-Step Deduction:

  1. Team L's Record:

    • Team L was the tournament champion, so Team L won all 3 of its Stage 2 matches (Quarterfinal, Semifinal, Grand Final).

    • In Stage 1, Team L qualified from Group 2. By Landau's tournament theorem, any qualifying team in an 8-team round-robin must win at least 2 matches in Stage 1.

    • Thus, total tournament wins for Team L =Wins(L,Stage 1)+3≥2+3=5= \text{Wins}(L, \text{Stage 1}) + 3 \ge 2 + 3 = 5 wins.

  2. Team E's Record:

    • Team E was in Group 1 and did not qualify for Stage 2 (qualifiers were A, B, C, D).

    • Thus, Team E played only in Stage 1 (finishing at best 5th in Group 1).

    • Can 5 teams have 6 wins each in an 8-team group? Total wins =5×6=30>28= 5 \times 6 = 30 > 28 (impossible).

    • Therefore, Team E could win at most 5 matches in Stage 1.

  3. Equating Wins:

    • Since Wins(E)=Wins(L)\text{Wins}(E) = \text{Wins}(L), and Wins(E)≤5\text{Wins}(E) \le 5 while Wins(L)≥5\text{Wins}(L) \ge 5, the only consistent solution is:

      Wins(E)=Wins(L)=5\text{Wins}(E) = \text{Wins}(L) = 5

    • Therefore, the sum of matches won by Team E and Team L is:

      5+5=105 + 5 = \mathbf{10}

Hence, the correct answer is 10.

Question 19 · Moderate

Directions for Questions 18 to 21

Sixteen elite esports teams—named Team A through Team P—participated in the Dota 2 Champions League. The tournament was conducted in two distinct stages:

  • Stage 1 (Group Stage): The sixteen teams were divided into two groups of eight: Teams A to H in Group 1, and Teams I to P in Group 2. Each team in a group played exactly one match against every other team in that group (7 matches per team; 28 matches total per group). At the conclusion of Stage 1, the top four teams from each group advanced to Stage 2, while the remaining teams were eliminated.

  • Stage 2 (Championship Knockout): Stage 2 comprised three single-elimination rounds—Quarterfinals, Semifinals, and the Grand Final. Each round involved a single match for each participating team. The winner advanced to the next round, while the loser was eliminated. The team remaining undefeated in Stage 2 was crowned the Tournament Champion.

At the end of Stage 1, group ranks were determined by total wins. Ties were resolved by standard tie-breaking rules. The qualifying teams from Group 1 were Teams A, B, C, and D; the qualifying teams from Group 2 were Teams I, J, K, and L. No match in the tournament ended in a draw.

The number of matches won in the first stage by a team that advanced to the second stage could not be less than:

  1. A

    1

  2. B

    2

  3. C

    3

  4. D

    4

Show answer and explanation

Answer: (B) 2

Step-by-Step Deduction:

  1. In an 8-team single round-robin tournament, each team plays 7 matches, for a total of 8×72=28\frac{8 \times 7}{2} = 28 matches.

  2. By Landau's Theorem, a sequence of non-decreasing scores (s1≤s2≤⋯≤s8)(s_1 \le s_2 \le \dots \le s_8) is a valid tournament score sequence if and only if:

    ∑i=1ksi≥k(k−1)2for all 1≤k≤8, with equality for k=8.\sum_{i=1}^{k} s_i \ge \frac{k(k-1)}{2} \quad \text{for all } 1 \le k \le 8, \text{ with equality for } k = 8.

  3. To test if the 4th qualifying team (which corresponds to s5s_5 in ascending order) can have only 1 win:

    • If s5=1s_5 = 1, then s1,s2,s3,s4,s5≤1s_1, s_2, s_3, s_4, s_5 \le 1.

    • Then the sum of the first 5 scores ∑i=15si≤5×1=5\sum_{i=1}^{5} s_i \le 5 \times 1 = 5.

    • However, Landau's condition for k=5k = 5 mandates:

      ∑i=15si≥5×42=10\sum_{i=1}^{5} s_i \ge \frac{5 \times 4}{2} = 10

    • Since 5<105 < 10, this is a direct mathematical contradiction. A team cannot qualify with only 1 win.

  4. For s5=2s_5 = 2, consider the score sequence [2,2,2,2,2,6,6,6][2, 2, 2, 2, 2, 6, 6, 6]:

    • Running sums: 2,4,6,8,10,16,22,282, 4, 6, 8, 10, 16, 22, 28. All satisfy ∑i=1ksi≥k(k−1)2\sum_{i=1}^k s_i \ge \frac{k(k-1)}{2}.

    • Here, the top 4 teams have scores 6,6,6,26, 6, 6, 2, meaning a team can advance with 2 wins.

Therefore, the minimum number of wins to advance could not be less than 2.

Question 20 · Moderate

Directions for Questions 18 to 21

Sixteen elite esports teams—named Team A through Team P—participated in the Dota 2 Champions League. The tournament was conducted in two distinct stages:

  • Stage 1 (Group Stage): The sixteen teams were divided into two groups of eight: Teams A to H in Group 1, and Teams I to P in Group 2. Each team in a group played exactly one match against every other team in that group (7 matches per team; 28 matches total per group). At the conclusion of Stage 1, the top four teams from each group advanced to Stage 2, while the remaining teams were eliminated.

  • Stage 2 (Championship Knockout): Stage 2 comprised three single-elimination rounds—Quarterfinals, Semifinals, and the Grand Final. Each round involved a single match for each participating team. The winner advanced to the next round, while the loser was eliminated. The team remaining undefeated in Stage 2 was crowned the Tournament Champion.

At the end of Stage 1, group ranks were determined by total wins. Ties were resolved by standard tie-breaking rules. The qualifying teams from Group 1 were Teams A, B, C, and D; the qualifying teams from Group 2 were Teams I, J, K, and L. No match in the tournament ended in a draw.

How many of the following statements is/are true?

(i) The maximum number of teams that could have exactly one win in the first stage was 6.

(ii) The maximum number of teams that could have exactly three wins in the first stage was 12.

(iii) The number of teams that had exactly 2 wins in the second stage was 2.

  1. A

    None

  2. B

    1

  3. C

    2

  4. D

    3

Show answer and explanation

Answer: (C) 2

Evaluation of Statements:

  1. Statement (i): Maximum number of teams with 1 win in Stage 1 was 6.

    • In a group of 8, at most 3 teams can have 1 win (by Landau's condition: 4×1=4<64 \times 1 = 4 < 6).

    • A valid distribution with three 1-win teams in a group is [1,1,1,4,4,5,6,6][1, 1, 1, 4, 4, 5, 6, 6].

    • Across both Group 1 and Group 2, 3+3=63 + 3 = 6 teams can have exactly one win.

    • Thus, Statement (i) is TRUE.

  2. Statement (ii): Maximum number of teams with 3 wins in Stage 1 was 12.

    • In a group of 8, seven teams can each have 3 wins: [3,3,3,3,3,3,3,7][3, 3, 3, 3, 3, 3, 3, 7] (total wins =21+7=28= 21 + 7 = 28, completely valid).

    • Across both groups, up to 7+7=147 + 7 = 14 teams can have 3 wins.

    • Thus, Statement (ii) is FALSE (it is 14, not 12).

  3. Statement (iii): The number of teams with exactly 2 wins in the second stage was 2.

    • In Stage 2, before the Grand Final, both finalists have won 2 knockout matches (Quarterfinal and Semifinal).

    • Under the problem structure, exactly 2 teams achieve 2 knockout wins en route to the final.

    • Thus, Statement (iii) is considered TRUE.

Therefore, exactly 2 statements ((i) and (iii)) are true.

Question 21 · Moderate

Directions for Questions 18 to 21

Sixteen elite esports teams—named Team A through Team P—participated in the Dota 2 Champions League. The tournament was conducted in two distinct stages:

  • Stage 1 (Group Stage): The sixteen teams were divided into two groups of eight: Teams A to H in Group 1, and Teams I to P in Group 2. Each team in a group played exactly one match against every other team in that group (7 matches per team; 28 matches total per group). At the conclusion of Stage 1, the top four teams from each group advanced to Stage 2, while the remaining teams were eliminated.

  • Stage 2 (Championship Knockout): Stage 2 comprised three single-elimination rounds—Quarterfinals, Semifinals, and the Grand Final. Each round involved a single match for each participating team. The winner advanced to the next round, while the loser was eliminated. The team remaining undefeated in Stage 2 was crowned the Tournament Champion.

At the end of Stage 1, group ranks were determined by total wins. Ties were resolved by standard tie-breaking rules. The qualifying teams from Group 1 were Teams A, B, C, and D; the qualifying teams from Group 2 were Teams I, J, K, and L. No match in the tournament ended in a draw.

The value of the total number of matches won in the first stage by teams A, B, C, and D combined could not be more than:

  1. A

    16

  2. B

    18

  3. C

    20

  4. D

    22

Show answer and explanation

Answer: (D) 22

Step-by-Step Deduction:

  1. Group 1 has 8 teams playing a total of 28 matches.

  2. The 4 non-qualifying teams (bottom 4 teams) must have played among themselves at least (42)=6\binom{4}{2} = 6 matches.

    • Therefore, the sum of wins of the bottom 4 teams cannot be less than 6:

      ∑i=14si≥6\sum_{i=1}^{4} s_i \ge 6

  3. Consequently, the maximum total number of matches won by the top 4 teams (A, B, C, D) is:

    Total Wins(A,B,C,D)=28−∑i=14si≤28−6=22\text{Total Wins}(A, B, C, D) = 28 - \sum_{i=1}^{4} s_i \le 28 - 6 = \mathbf{22}

  4. This maximum of 22 is attainable with the valid win sequence [1,1,2,2,4,6,6,6][1, 1, 2, 2, 4, 6, 6, 6], where the top four teams score 6+6+6+4=226 + 6 + 6 + 4 = 22 wins.

Hence, the maximum possible sum of wins is 22.

Question 22 · Moderate

Directions for Questions 22 to 24

Two network security commanders—Commander Blue and Commander Red—play a tactical partitioning game on a 4×44 \times 4 server grid. Each cell in the grid contains an integer bandwidth yield (in Gbps):

3235
6278
10243
7295

Rules of Engagement:

  • Commander Blue and Commander Red make moves alternately, with Commander Blue moving first.

  • A move consists of splitting the active grid configuration into two equal halves and retaining one half.

  • Commander Blue is allowed to split the grid only vertically, choosing to retain either the left half or the right half.

  • Commander Red is allowed to split the grid only horizontally, choosing to retain either the upper half or the lower half.

  • After two moves by each commander (4 moves total), exactly one cell remains. The number in that cell represents the final bandwidth gain (payoff) secured by Commander Blue (who wishes to maximize this value, while Commander Red seeks to minimize it).

If Commander Blue chooses (retain right) followed by (retain left) in his turns, what is the best move sequence for Commander Red to reduce Commander Blue's bandwidth gain to a minimum?

  1. A

    (retain upper) then (retain lower)

  2. B

    (retain lower) then (retain upper)

  3. C

    (retain upper) then (retain upper)

  4. D

    (retain lower) then (retain lower)

Show answer and explanation

Answer: (C) (retain upper) then (retain upper)

Step-by-Step Deduction:

  1. Commander Blue's moves:

    • Turn 1: (retain right)   ⟹  \implies columns 2 and 3 of the original grid are retained.

    • Turn 2: (retain left)   ⟹  \implies column 2 of the original grid is retained.

  2. The cells remaining in column 2 from top to bottom are:

    • Row 0: 3

    • Row 1: 7

    • Row 2: 4

    • Row 3: 9

  3. Commander Red chooses two horizontal splits to minimize the final value:

    • If Red chooses (retain upper) then (retain lower): retains Row 1   ⟹  \implies value = 7.

    • If Red chooses (retain lower) then (retain upper): retains Row 2   ⟹  \implies value = 4.

    • If Red chooses (retain upper) then (retain upper): retains Row 0   ⟹  \implies value = 3.

    • If Red chooses (retain lower) then (retain lower): retains Row 3   ⟹  \implies value = 9.

  4. To reduce Commander Blue's gain to the minimum possible (3 Gbps3\text{ Gbps}), Commander Red must execute (retain upper) then (retain upper).

Question 23 · Moderate

Directions for Questions 22 to 24

Two network security commanders—Commander Blue and Commander Red—play a tactical partitioning game on a 4×44 \times 4 server grid. Each cell in the grid contains an integer bandwidth yield (in Gbps):

3235
6278
10243
7295

Rules of Engagement:

  • Commander Blue and Commander Red make moves alternately, with Commander Blue moving first.

  • A move consists of splitting the active grid configuration into two equal halves and retaining one half.

  • Commander Blue is allowed to split the grid only vertically, choosing to retain either the left half or the right half.

  • Commander Red is allowed to split the grid only horizontally, choosing to retain either the upper half or the lower half.

  • After two moves by each commander (4 moves total), exactly one cell remains. The number in that cell represents the final bandwidth gain (payoff) secured by Commander Blue (who wishes to maximize this value, while Commander Red seeks to minimize it).

If both commanders select their moves intelligently with optimal minimax strategies, what will be Commander Blue's final bandwidth gain at the end of the game?

  1. A

    5 Gbps

  2. B

    4 Gbps

  3. C

    3 Gbps

  4. D

    None of these

Show answer and explanation

Answer: (B) 4 Gbps

Minimax Game-Theoretic Analysis:

After Turn 1 (Blue) and Turn 1 (Red), the game reduces to one of four 2×22 \times 2 quadrants:

  1. Top-Left Quadrant (Cols 0-1, Rows 0-1):

    [3262]\begin{bmatrix} 3 & 2 \\ 6 & 2 \end{bmatrix}

    • Col 0 gives min⁡(3,6)=3\min(3, 6) = 3; Col 1 gives min⁡(2,2)=2\min(2, 2) = 2.

    • Blue maximizes: max⁡(3,2)=3\max(3, 2) = 3.

  2. Bottom-Left Quadrant (Cols 0-1, Rows 2-3):

    [10272]\begin{bmatrix} 10 & 2 \\ 7 & 2 \end{bmatrix}

    • Col 0 gives min⁡(10,7)=7\min(10, 7) = 7; Col 1 gives min⁡(2,2)=2\min(2, 2) = 2.

    • Blue maximizes: max⁡(7,2)=7\max(7, 2) = 7.

  3. Top-Right Quadrant (Cols 2-3, Rows 0-1):

    [3578]\begin{bmatrix} 3 & 5 \\ 7 & 8 \end{bmatrix}

    • Col 2 gives min⁡(3,7)=3\min(3, 7) = 3; Col 3 gives min⁡(5,8)=5\min(5, 8) = 5.

    • Blue maximizes: max⁡(3,5)=5\max(3, 5) = 5.

  4. Bottom-Right Quadrant (Cols 2-3, Rows 2-3):

    [4395]\begin{bmatrix} 4 & 3 \\ 9 & 5 \end{bmatrix}

    • Col 2 gives min⁡(4,9)=4\min(4, 9) = 4; Col 3 gives min⁡(3,5)=3\min(3, 5) = 3.

    • Blue maximizes: max⁡(4,3)=4\max(4, 3) = 4.

Commander Red's Turn 1 Response:

  • If Blue chooses Left: Red chooses min⁡(Top-Left,Bottom-Left)=min⁡(3,7)=3\min(\text{Top-Left}, \text{Bottom-Left}) = \min(3, 7) = 3.

  • If Blue chooses Right: Red chooses min⁡(Top-Right,Bottom-Right)=min⁡(5,4)=4\min(\text{Top-Right}, \text{Bottom-Right}) = \min(5, 4) = 4.

Commander Blue's Turn 1 Choice:

  • Blue chooses Right, securing max⁡(3,4)=4 Gbps\max(3, 4) = \mathbf{4\text{ Gbps}}.

Question 24 · Moderate

Directions for Questions 22 to 24

Two network security commanders—Commander Blue and Commander Red—play a tactical partitioning game on a 4×44 \times 4 server grid. Each cell in the grid contains an integer bandwidth yield (in Gbps):

3235
6278
10243
7295

Rules of Engagement:

  • Commander Blue and Commander Red make moves alternately, with Commander Blue moving first.

  • A move consists of splitting the active grid configuration into two equal halves and retaining one half.

  • Commander Blue is allowed to split the grid only vertically, choosing to retain either the left half or the right half.

  • Commander Red is allowed to split the grid only horizontally, choosing to retain either the upper half or the lower half.

  • After two moves by each commander (4 moves total), exactly one cell remains. The number in that cell represents the final bandwidth gain (payoff) secured by Commander Blue (who wishes to maximize this value, while Commander Red seeks to minimize it).

If Commander Blue's first move is (retain right), then whatever moves Commander Red may select, Commander Blue can always force a bandwidth gain of no less than:

  1. A

    4 Gbps

  2. B

    7 Gbps

  3. C

    5 Gbps

  4. D

    None of these

Show answer and explanation

Answer: (A) 4 Gbps

Step-by-Step Deduction:

  1. If Blue moves (retain right), the active grid is the right half (columns 2 and 3).

  2. Red can choose either:

    • (retain upper): Leaves the Top-Right quadrant with cells [3578]\begin{bmatrix} 3 & 5 \\ 7 & 8 \end{bmatrix}.

      Blue then chooses (retain right) to pick column 3, yielding min⁡(5,8)=5 Gbps\min(5, 8) = 5\text{ Gbps}.

    • (retain lower): Leaves the Bottom-Right quadrant with cells [4395]\begin{bmatrix} 4 & 3 \\ 9 & 5 \end{bmatrix}.

      Blue then chooses (retain left) to pick column 2, yielding min⁡(4,9)=4 Gbps\min(4, 9) = 4\text{ Gbps}.

  3. Therefore, regardless of whether Red chooses upper or lower, Blue can guarantee a gain of at least:

    min⁡(5,4)=4 Gbps\min(5, 4) = \mathbf{4\text{ Gbps}}

Hence, Blue forces a gain of no less than 4 Gbps.

Question 25 · Moderate

Directions for Questions 25 to 28

An electric hypercar prototype features an automated energy buffer whose charge level is measured in integer units from 0,1,2,…,M0, 1, 2, \dots, M MegaJoules (MJ), where M>0M > 0. The power management system executes four types of control commands:

CommandOperation & Meaning
BOOTSet buffer charge level directly to 1 MJ.
SHUTDOWNSet buffer charge level directly to 0 MJ.
BOOST, nFrom current charge, increase by $n$ MJ; if maximum capacity $M$ is reached, stop at $M$ (i.e. $\min(\text{level} + n, M)$).
DRAIN, nFrom current charge, decrease by $n$ MJ; if 0 MJ is reached, stop at 0 (i.e. $\max(\text{level} - n, 0)$).

In each question below, a sequence of instructions is executed. Let n1n_1 denote the initial charge level before execution, and n2n_2 denote the final charge level after execution.

Execution Sequence: BOOST, 30 ; DRAIN, 12.

Which of the following statements is true regarding the above instructions?

  1. A

    n1 = n2 if M = 12 and n1 = 0

  2. B

    M = 25 provided n1 > 0

  3. C

    n1 > 35 provided M = 1000

  4. D

    n1 = 45 provided M = 30

Show answer and explanation

Answer: (A) n1 = n2 if M = 12 and n1 = 0

Step-by-Step Deduction:

  1. Given the sequence BOOST, 30 ; DRAIN, 12:

    • After BOOST, 30: level=min⁡(n1+30,M)\text{level} = \min(n_1 + 30, M).

    • After DRAIN, 12: n2=max⁡(min⁡(n1+30,M)−12,0)n_2 = \max(\min(n_1 + 30, M) - 12, 0).

  2. Test option (1): If M=12M = 12 and n1=0n_1 = 0:

    • After BOOST, 30: min⁡(0+30,12)=12\min(0 + 30, 12) = 12.

    • After DRAIN, 12: max⁡(12−12,0)=0\max(12 - 12, 0) = 0.

    • Here, n2=0=n1n_2 = 0 = n_1, so n1=n2n_1 = n_2 holds true!

Hence, statement (1) is true.

Question 26 · Moderate

Directions for Questions 25 to 28

An electric hypercar prototype features an automated energy buffer whose charge level is measured in integer units from 0,1,2,…,M0, 1, 2, \dots, M MegaJoules (MJ), where M>0M > 0. The power management system executes four types of control commands:

CommandOperation & Meaning
BOOTSet buffer charge level directly to 1 MJ.
SHUTDOWNSet buffer charge level directly to 0 MJ.
BOOST, nFrom current charge, increase by $n$ MJ; if maximum capacity $M$ is reached, stop at $M$ (i.e. $\min(\text{level} + n, M)$).
DRAIN, nFrom current charge, decrease by $n$ MJ; if 0 MJ is reached, stop at 0 (i.e. $\max(\text{level} - n, 0)$).

In each question below, a sequence of instructions is executed. Let n1n_1 denote the initial charge level before execution, and n2n_2 denote the final charge level after execution.

Execution Sequence: DRAIN, 6 ; BOOST, 6.

Which of the following statements is true regarding the above instructions?

  1. A

    n1 = n2 provided n1 >= 6

  2. B

    n1 = n2 provided n1 > 0

  3. C

    n2 = 6 provided M > 0

  4. D

    n1 > n2 provided M > 0

Show answer and explanation

Answer: (A) n1 = n2 provided n1 = 6

Step-by-Step Deduction:

  1. After DRAIN, 6: charge becomes max⁡(n1−6,0)\max(n_1 - 6, 0).

  2. If n1≥6n_1 \ge 6, then max⁡(n1−6,0)=n1−6\max(n_1 - 6, 0) = n_1 - 6.

  3. After BOOST, 6: charge becomes min⁡((n1−6)+6,M)=min⁡(n1,M)\min((n_1 - 6) + 6, M) = \min(n_1, M).

  4. Since n1≤Mn_1 \le M always holds, min⁡(n1,M)=n1\min(n_1, M) = n_1.

  5. Thus, n2=n1n_2 = n_1 whenever n1≥6n_1 \ge 6.

Hence, statement (1) is true.

Question 27 · Moderate

Directions for Questions 25 to 28

An electric hypercar prototype features an automated energy buffer whose charge level is measured in integer units from 0,1,2,…,M0, 1, 2, \dots, M MegaJoules (MJ), where M>0M > 0. The power management system executes four types of control commands:

CommandOperation & Meaning
BOOTSet buffer charge level directly to 1 MJ.
SHUTDOWNSet buffer charge level directly to 0 MJ.
BOOST, nFrom current charge, increase by $n$ MJ; if maximum capacity $M$ is reached, stop at $M$ (i.e. $\min(\text{level} + n, M)$).
DRAIN, nFrom current charge, decrease by $n$ MJ; if 0 MJ is reached, stop at 0 (i.e. $\max(\text{level} - n, 0)$).

In each question below, a sequence of instructions is executed. Let n1n_1 denote the initial charge level before execution, and n2n_2 denote the final charge level after execution.

Execution Sequence: BOOST, 15 ; BOOST, 15.

Which of the following statements is true regarding the above instructions?

  1. A

    n2 - n1 = 30 only if n1 = 0

  2. B

    n2 - n1 = 30 if M > 30 and n1 = 1

  3. C

    n2 - n1 = 15 if M = 31 and n1 = 0

  4. D

    n2 > n1 if M > 0

Show answer and explanation

Answer: (B) n2 - n1 = 30 if M 30 and n1 = 1

Step-by-Step Deduction:

  1. Two consecutive boosts of 15 MJ yield n2=min⁡(n1+30,M)n_2 = \min(n_1 + 30, M).

  2. The difference is n2−n1=min⁡(n1+30,M)−n1n_2 - n_1 = \min(n_1 + 30, M) - n_1.

  3. If M>30M > 30 (i.e. M≥31M \ge 31) and n1=1n_1 = 1:

    n1+30=1+30=31≤Mn_1 + 30 = 1 + 30 = 31 \le M

    Thus, n2=31n_2 = 31, and n2−n1=31−1=30n_2 - n_1 = 31 - 1 = 30.

Hence, statement (2) is true.

Question 28 · Moderate

Directions for Questions 25 to 28

An electric hypercar prototype features an automated energy buffer whose charge level is measured in integer units from 0,1,2,…,M0, 1, 2, \dots, M MegaJoules (MJ), where M>0M > 0. The power management system executes four types of control commands:

CommandOperation & Meaning
BOOTSet buffer charge level directly to 1 MJ.
SHUTDOWNSet buffer charge level directly to 0 MJ.
BOOST, nFrom current charge, increase by $n$ MJ; if maximum capacity $M$ is reached, stop at $M$ (i.e. $\min(\text{level} + n, M)$).
DRAIN, nFrom current charge, decrease by $n$ MJ; if 0 MJ is reached, stop at 0 (i.e. $\max(\text{level} - n, 0)$).

In each question below, a sequence of instructions is executed. Let n1n_1 denote the initial charge level before execution, and n2n_2 denote the final charge level after execution.

Execution Sequence: BOOST, 6 ; DRAIN, 5.

Which of the following statements is true regarding the above instructions?

  1. A

    n2 = n1 + 5 provided 1 < n1 < 8

  2. B

    n2 = n1 provided M < 7

  3. C

    n2 = n1 + 1 provided M - n1 >= 6

  4. D

    n2 - n1 < 0 provided M > 0

Show answer and explanation

Answer: (C) n2 = n1 + 1 provided M - n1 = 6

Step-by-Step Deduction:

  1. After BOOST, 6: charge becomes min⁡(n1+6,M)\min(n_1 + 6, M).

  2. If M−n1≥6M - n_1 \ge 6, then n1+6≤Mn_1 + 6 \le M, so the level reaches exactly n1+6n_1 + 6.

  3. After DRAIN, 5: charge becomes max⁡((n1+6)−5,0)=max⁡(n1+1,0)=n1+1\max((n_1 + 6) - 5, 0) = \max(n_1 + 1, 0) = n_1 + 1.

  4. Therefore, n2=n1+1n_2 = n_1 + 1 provided M−n1≥6M - n_1 \ge 6.

Hence, statement (3) is true.

Question 29 · Moderate

Directions for Questions 29 to 32

On Neo-Kyoto Island, the Esports Ethics Tribunal conducts investigations into tournament security incidents. During interrogations, synthetic referee AI bots follow a strict built-in truth-alternation protocol: whenever questioned, each AI bot always speaks exactly two sentences, one of which is strictly TRUE and the other strictly FALSE (in either order).

During an investigation into a tournament server breach, security officials question three AI agents—Jax, Mikel, and Kyle—who reply as follows:

  • Jax says: "I didn't breach the server. Mikel didn't breach the server."

  • Mikel says: "I didn't breach the server. Kyle didn't breach the server."

  • Kyle says: "I didn't breach the server. I don't know who breached the server."

Assuming exactly one of them breached the server, who breached the server?

  1. A

    Jax

  2. B

    Mikel

  3. C

    Kyle

  4. D

    None of them

Show answer and explanation

Answer: (B) Mikel

Step-by-Step Deduction:

Assume exactly one agent breached the server:

  1. Test Hypothesis: Mikel breached the server:

    • Jax:

      • Statement 1: "I didn't breach the server." →\rightarrow TRUE (Jax is innocent).

      • Statement 2: "Mikel didn't breach the server." →\rightarrow FALSE (Mikel did it).

      • Jax speaks [TRUE, FALSE]. Consistent!

    • Mikel:

      • Statement 1: "I didn't breach the server." →\rightarrow FALSE (Mikel did it).

      • Statement 2: "Kyle didn't breach the server." →\rightarrow TRUE (Kyle is innocent).

      • Mikel speaks [FALSE, TRUE]. Consistent!

    • Kyle:

      • Statement 1: "I didn't breach the server." →\rightarrow TRUE (Kyle is innocent).

      • Statement 2: "I don't know who breached the server." →\rightarrow FALSE (Kyle knows).

      • Kyle speaks [TRUE, FALSE]. Consistent!

  2. All statements are completely consistent under the protocol. Testing other culprits results in contradictions.

Hence, Mikel breached the server.

Question 30 · Moderate

Directions for Questions 29 to 32

On Neo-Kyoto Island, the Esports Ethics Tribunal conducts investigations into tournament security incidents. During interrogations, synthetic referee AI bots follow a strict built-in truth-alternation protocol: whenever questioned, each AI bot always speaks exactly two sentences, one of which is strictly TRUE and the other strictly FALSE (in either order).

There is only one Chief Drone Pilot in the tournament arena. Investigators question three AI operators—Kairo, Leon, and Miro. They also observe that Kairo is wearing an elite Commander Badge.

  • Miro says: "Leon's mentor is the Chief Drone Pilot. Leon is not the System Administrator's protégé."

  • Kairo says: "I am the System Administrator. In this arena, only System Administrators can wear Commander Badges."

  • Leon says: "I am the System Administrator's protégé. Kairo is not the System Administrator."

Which of the following statements is true?

  1. A

    Leon is not Kairo's protégé

  2. B

    Kairo is the Chief Drone Pilot

  3. C

    Miro is the Chief Drone Pilot

  4. D

    Leon is the System Administrator

Show answer and explanation

Answer: (B) Kairo is the Chief Drone Pilot

Step-by-Step Deduction:

  1. Analyze Kairo:

    • Kairo is observed wearing a Commander Badge.

    • If Kairo's second statement ("Only System Administrators can wear Commander Badges") were TRUE, then Kairo MUST be a System Administrator, which would make his first statement ("I am the System Administrator") also TRUE.

    • This would produce two TRUE statements, violating the alternating protocol!

    • Therefore, Kairo's second statement is FALSE, and his first statement must be TRUE.

    • Deduction 1: Kairo IS the System Administrator.

  2. Analyze Leon:

    • Leon's second statement: "Kairo is not the System Administrator" →\rightarrow FALSE.

    • Therefore, Leon's first statement must be TRUE: "I am the System Administrator's protégé."

    • Deduction 2: Leon is Kairo's protégé.

  3. Analyze Miro:

    • Miro's second statement: "Leon is not the System Administrator's protégé" →\rightarrow FALSE.

    • Therefore, Miro's first statement must be TRUE: "Leon's mentor is the Chief Drone Pilot."

    • Since Leon's mentor is Kairo, Kairo is the Chief Drone Pilot.

Thus, Kairo is the Chief Drone Pilot.

Question 31 · CAT Level

Directions for Questions 29 to 32

On Neo-Kyoto Island, the Esports Ethics Tribunal conducts investigations into tournament security incidents. During interrogations, synthetic referee AI bots follow a strict built-in truth-alternation protocol: whenever questioned, each AI bot always speaks exactly two sentences, one of which is strictly TRUE and the other strictly FALSE (in either order).

An esports analyst arrives at a fork in the transit hyperloop leading toward the championship venue and questions three resident AI guides—Ray, Lex, and Lia—asking: "Which transit tunnel leads directly to the tournament arena?"

  • Ray says: "I never speak to unauthorized visitors. I am newly deployed to this sector."

  • Lex says: "I am paired with Lia. Take the left tunnel."

  • Lia says: "I am paired with Ray. Ray is not newly deployed to this sector."

Which of the following is true?

  1. A

    The left tunnel leads to the tournament arena

  2. B

    The right tunnel leads to the tournament arena

  3. C

    Lia is paired with Lex

  4. D

    None of these

Show answer and explanation

Answer: (A) The left tunnel leads to the tournament arena

Step-by-Step Deduction:

  1. Analyze Ray:

    • Ray's first statement is: "I never speak to unauthorized visitors." But Ray is currently speaking to the analyst! Hence, this statement is self-evidently FALSE.

    • By the alternation rule, Ray's second statement must be TRUE: "I am newly deployed to this sector."

  2. Analyze Lia:

    • Lia's second statement is: "Ray is not newly deployed to this sector." Since Ray is newly deployed, this statement is FALSE.

    • By the alternation rule, Lia's first statement must be TRUE: "I am paired with Ray."

  3. Analyze Lex:

    • Lex's first statement is: "I am paired with Lia." Since Lia is paired with Ray, Lex's first statement is FALSE.

    • By the alternation rule, Lex's second statement must be TRUE: "Take the left tunnel."

Therefore, the left tunnel leads directly to the tournament arena.

Question 32 · CAT Level

Directions for Questions 29 to 32

On Neo-Kyoto Island, the Esports Ethics Tribunal conducts investigations into tournament security incidents. During interrogations, synthetic referee AI bots follow a strict built-in truth-alternation protocol: whenever questioned, each AI bot always speaks exactly two sentences, one of which is strictly TRUE and the other strictly FALSE (in either order).

You need to locate the Chief Tournament Director among three squad leaders: Aaron, Brian, and Caleb. It is known that only Brian is wearing a crimson team jersey.

  • Aaron says: "I am not Brian's junior officer. The Chief Tournament Director wears a crimson team jersey."

  • Brian says: "I am Aaron's senior officer. Caleb is the Chief Tournament Director."

  • Caleb says: "The Chief Tournament Director is one among us. I am the Chief Tournament Director."

Who is the Chief Tournament Director?

  1. A

    Aaron

  2. B

    Brian

  3. C

    Caleb

  4. D

    None of them

Show answer and explanation

Answer: (B) Brian

Step-by-Step Deduction:

  1. Analyze Caleb:

    • Caleb says: (1) "The Chief is one among us", (2) "I am the Chief".

    • If statement (1) were FALSE, statement (2) would also be FALSE (contradicting the 1-true 1-false rule).

    • Therefore, statement (1) is TRUE, which means statement (2) is FALSE.

    • Deduction: Caleb is NOT the Chief.

  2. Analyze Brian:

    • Brian's second statement is: "Caleb is the Chief." Since Caleb is not the Chief, this is FALSE.

    • Therefore, Brian's first statement is TRUE: "I am Aaron's senior officer."

  3. Analyze Aaron:

    • Aaron's first statement: "I am not Brian's junior officer." Since Brian is Aaron's senior officer, this is FALSE.

    • Therefore, Aaron's second statement is TRUE: "The Chief Tournament Director wears a crimson team jersey."

  4. Only Brian is wearing a crimson team jersey. Thus, Brian is the Chief Tournament Director.

Question 33 · CAT Level

Directions for Questions 33 to 36

Four esports squad teammates—Sarah, Samantha, Stella, and Sophia—share all tournament rewards equally according to team policy. Following their championship victory, Team Director Paul awarded a sealed vault of championship energy tokens to Sarah. Because her teammates were not yet in the team lounge, Sarah divided all the tokens in the vault into four equal parts, claimed her one share, and returned the remaining tokens to the vault.

As Sarah was securing the vault, Samantha walked in. Samantha took all the remaining tokens out of the vault and divided them into four equal parts. Sarah and Samantha took one equal part each, and deposited the rest back into the vault.

Just then, Stella arrived. She took all the remaining tokens from the vault and divided them into four equal parts. The three teammates present—Sarah, Samantha, and Stella—took one equal part each, and returned the remainder to the vault.

Finally, Sophia entered the lounge. She took all the remaining tokens from the vault and divided them into four equal parts. All four teammates—Sarah, Samantha, Stella, and Sophia—took one equal part each, leaving the vault completely empty. In total, Sophia received 6 energy tokens.

How many energy tokens, in total, did Stella receive?

  1. A

    60

  2. B

    24

  3. C

    30

  4. D

    12

Show answer and explanation

Answer: (C) 30

Backward Induction Trace:

  1. Sophia's Entry (Stage 4):

    • Sophia divided the remaining tokens into 4 equal shares, and all 4 girls took 1 share each.

    • Sophia received 6 tokens in total, so each share at Stage 4 was 6 tokens.

    • Total tokens in the vault when Sophia entered =4×6=24= 4 \times 6 = 24 tokens.

  2. Stella's Entry (Stage 3):

    • When Stella arrived, she divided the vault into 4 equal parts. Sarah, Samantha, and Stella took 1 part each (3 parts taken), leaving 1 part in the vault.

    • That 1 remaining part was the 24 tokens found by Sophia.

    • Hence, each part at Stage 3 was 24 tokens.

    • Total tokens in the vault when Stella entered =4×24=96= 4 \times 24 = 96 tokens.

    • Stella ate 24 tokens at Stage 3.

  3. Samantha's Entry (Stage 2):

    • Samantha divided the vault into 4 equal parts. Sarah and Samantha took 1 part each (2 parts taken), leaving 2 parts in the vault.

    • Those 2 remaining parts equaled the 96 tokens found by Stella   ⟹  \implies each part was 962=48\frac{96}{2} = 48 tokens.

    • Total tokens in the vault when Samantha entered =4×48=192= 4 \times 48 = 192 tokens.

  4. Sarah's Entry (Stage 1):

    • Sarah divided the vault into 4 equal parts, took 1 part, leaving 3 parts in the vault.

    • Those 3 parts equaled the 192 tokens found by Samantha   ⟹  \implies each part was 1923=64\frac{192}{3} = 64 tokens.

    • Total original tokens awarded by Paul =4×64=256= 4 \times 64 = 256 tokens.

  5. Total Tokens for Stella:

    • Stella received tokens only in Stage 3 and Stage 4:

      Total for Stella=24 (Stage 3)+6 (Stage 4)=30 tokens\text{Total for Stella} = 24\text{ (Stage 3)} + 6\text{ (Stage 4)} = \mathbf{30\text{ tokens}}

Hence, Stella received 30 energy tokens in total.

Question 34 · CAT Level

Directions for Questions 33 to 36

Four esports squad teammates—Sarah, Samantha, Stella, and Sophia—share all tournament rewards equally according to team policy. Following their championship victory, Team Director Paul awarded a sealed vault of championship energy tokens to Sarah. Because her teammates were not yet in the team lounge, Sarah divided all the tokens in the vault into four equal parts, claimed her one share, and returned the remaining tokens to the vault.

As Sarah was securing the vault, Samantha walked in. Samantha took all the remaining tokens out of the vault and divided them into four equal parts. Sarah and Samantha took one equal part each, and deposited the rest back into the vault.

Just then, Stella arrived. She took all the remaining tokens from the vault and divided them into four equal parts. The three teammates present—Sarah, Samantha, and Stella—took one equal part each, and returned the remainder to the vault.

Finally, Sophia entered the lounge. She took all the remaining tokens from the vault and divided them into four equal parts. All four teammates—Sarah, Samantha, Stella, and Sophia—took one equal part each, leaving the vault completely empty. In total, Sophia received 6 energy tokens.

How many energy tokens did Director Paul originally award in the vault?

  1. A

    256

  2. B

    312

  3. C

    512

  4. D

    384

Show answer and explanation

Answer: (A) 256

Step-by-Step Deduction:

Following the backward reconstruction established in Question 33:

  • Tokens left after Stage 1 =3×share1=192= 3 \times \text{share}_1 = 192.

  • Original share size =1923=64= \frac{192}{3} = 64 tokens.

  • Total initial tokens awarded by Director Paul =4×64=256 tokens= 4 \times 64 = \mathbf{256\text{ tokens}}.

Question 35 · CAT Level

Directions for Questions 33 to 36

Four esports squad teammates—Sarah, Samantha, Stella, and Sophia—share all tournament rewards equally according to team policy. Following their championship victory, Team Director Paul awarded a sealed vault of championship energy tokens to Sarah. Because her teammates were not yet in the team lounge, Sarah divided all the tokens in the vault into four equal parts, claimed her one share, and returned the remaining tokens to the vault.

As Sarah was securing the vault, Samantha walked in. Samantha took all the remaining tokens out of the vault and divided them into four equal parts. Sarah and Samantha took one equal part each, and deposited the rest back into the vault.

Just then, Stella arrived. She took all the remaining tokens from the vault and divided them into four equal parts. The three teammates present—Sarah, Samantha, and Stella—took one equal part each, and returned the remainder to the vault.

Finally, Sophia entered the lounge. She took all the remaining tokens from the vault and divided them into four equal parts. All four teammates—Sarah, Samantha, Stella, and Sophia—took one equal part each, leaving the vault completely empty. In total, Sophia received 6 energy tokens.

How many energy tokens, in total, did Sarah receive?

  1. A

    64

  2. B

    284

  3. C

    144

  4. D

    142

Show answer and explanation

Answer: (D) 142

Step-by-Step Deduction:

Sarah received a share at every single stage of the distribution:

  • Stage 1: 64 tokens

  • Stage 2: 48 tokens

  • Stage 3: 24 tokens

  • Stage 4: 6 tokens

Total for Sarah=64+48+24+6=142 tokens\text{Total for Sarah} = 64 + 48 + 24 + 6 = \mathbf{142\text{ tokens}}

Question 36 · CAT Level

Directions for Questions 33 to 36

Four esports squad teammates—Sarah, Samantha, Stella, and Sophia—share all tournament rewards equally according to team policy. Following their championship victory, Team Director Paul awarded a sealed vault of championship energy tokens to Sarah. Because her teammates were not yet in the team lounge, Sarah divided all the tokens in the vault into four equal parts, claimed her one share, and returned the remaining tokens to the vault.

As Sarah was securing the vault, Samantha walked in. Samantha took all the remaining tokens out of the vault and divided them into four equal parts. Sarah and Samantha took one equal part each, and deposited the rest back into the vault.

Just then, Stella arrived. She took all the remaining tokens from the vault and divided them into four equal parts. The three teammates present—Sarah, Samantha, and Stella—took one equal part each, and returned the remainder to the vault.

Finally, Sophia entered the lounge. She took all the remaining tokens from the vault and divided them into four equal parts. All four teammates—Sarah, Samantha, Stella, and Sophia—took one equal part each, leaving the vault completely empty. In total, Sophia received 6 energy tokens.

How many energy tokens, in total, did Samantha receive?

  1. A

    18

  2. B

    60

  3. C

    78

  4. D

    156

Show answer and explanation

Answer: (C) 78

Step-by-Step Deduction:

Samantha was present and received tokens during Stages 2, 3, and 4:

  • Stage 2: 48 tokens

  • Stage 3: 24 tokens

  • Stage 4: 6 tokens

Total for Samantha=48+24+6=78 tokens\text{Total for Samantha} = 48 + 24 + 6 = \mathbf{78\text{ tokens}}

(Verification Check: 142 (Sarah)+78 (Samantha)+30 (Stella)+6 (Sophia)=256 tokens142\text{ (Sarah)} + 78\text{ (Samantha)} + 30\text{ (Stella)} + 6\text{ (Sophia)} = 256\text{ tokens}. Matches perfectly!)

Question 37 · CAT Level

Directions for Questions 37 to 40

Chief Telemetry Engineer Brandon logs his daily shift hours during an extended 16-week pre-season hypercar testing program. On any given working day, Brandon logs xx hours of Active Telemetry Analysis and yy hours of Standby Monitoring. This schedule holds for one full week, followed by an exactly inverted schedule the subsequent week, alternating every week for four weeks (one month). Every fifth week (the beginning of each new month), a new baseline testing pattern is established.

Whenever Brandon logs more Active Telemetry Analysis hours than Standby Monitoring hours in a week (x>yx > y), his hourly compensation rate is twice what he earns per hour when Standby Monitoring hours exceed Active Telemetry Analysis hours (y>xy > x).

The following table displays Brandon's daily schedule for the benchmark weeks 1, 5, 9, and 13:

Shift Type1st Week5th Week9th Week13th Week
Standby Monitoring (hours/day)2340
Active Telemetry (hours/day)5768

(Note: A testing week consists of 6 working days, and a testing month consists of exactly 4 weeks.)

If Brandon was paid $30 per active hour during the 1st week, what was his total salary for the 1st month?

  1. A

    $2,640

  2. B

    $2,160

  3. C

    $1,980

  4. D

    $2,520

Show answer and explanation

Answer: (B) $2,160

Step-by-Step Deduction:

  1. In Week 1, Active = 5 hrs, Standby = 2 hrs. Since Active > Standby, the rate is Rhigh=$30R_{\text{high}} = \text{\textdollar}30/hr.

    • Daily earning =5×$30=$150= 5 \times \text{\textdollar}30 = \text{\textdollar}150/day.

    • Weekly earning (6 days) =6×$150=$900= 6 \times \text{\textdollar}150 = \text{\textdollar}900/week.

  2. In Week 2, the schedule inverts: Active = 2 hrs, Standby = 5 hrs. Here Standby > Active, so the rate halves to Rlow=$302=$15R_{\text{low}} = \frac{\text{\textdollar}30}{2} = \text{\textdollar}15/hr.

    • Daily earning =2×$15=$30= 2 \times \text{\textdollar}15 = \text{\textdollar}30/day.

    • Weekly earning (6 days) =6×$30=$180= 6 \times \text{\textdollar}30 = \text{\textdollar}180/week.

  3. In Week 3, the schedule repeats Week 1: $900\text{\textdollar}900/week.

  4. In Week 4, the schedule repeats Week 2: $180\text{\textdollar}180/week.

  5. Total salary for Month 1:

    Total=$900+$180+$900+$180=$2,160\text{Total} = \text{\textdollar}900 + \text{\textdollar}180 + \text{\textdollar}900 + \text{\textdollar}180 = \mathbf{\text{\textdollar}2,160}

Hence, Brandon's total salary for the 1st month was $2,160.

Question 38 · CAT Level

Directions for Questions 37 to 40

Chief Telemetry Engineer Brandon logs his daily shift hours during an extended 16-week pre-season hypercar testing program. On any given working day, Brandon logs xx hours of Active Telemetry Analysis and yy hours of Standby Monitoring. This schedule holds for one full week, followed by an exactly inverted schedule the subsequent week, alternating every week for four weeks (one month). Every fifth week (the beginning of each new month), a new baseline testing pattern is established.

Whenever Brandon logs more Active Telemetry Analysis hours than Standby Monitoring hours in a week (x>yx > y), his hourly compensation rate is twice what he earns per hour when Standby Monitoring hours exceed Active Telemetry Analysis hours (y>xy > x).

The following table displays Brandon's daily schedule for the benchmark weeks 1, 5, 9, and 13:

Shift Type1st Week5th Week9th Week13th Week
Standby Monitoring (hours/day)2340
Active Telemetry (hours/day)5768

(Note: A testing week consists of 6 working days, and a testing month consists of exactly 4 weeks.)

Using the compensation rate established in Question 37, what was Brandon's average monthly salary across the first four months (16 weeks) under the standard payment structure?

  1. A

    $2,670

  2. B

    $3,060

  3. C

    $2,745

  4. D

    $2,520

Show answer and explanation

Answer: (C) $2,745

Monthly Compilation under Standard Policy:

  1. Month 1: Total =$2,160= \text{\textdollar}2,160.

  2. Month 2 (Weeks 5 to 8):

    • Weeks 5 & 7 (7 active, 3 standby): Daily =7×$30=$210  ⟹  = 7 \times \text{\textdollar}30 = \text{\textdollar}210 \implies Weekly =6×210=$1,260= 6 \times 210 = \text{\textdollar}1,260.

    • Weeks 6 & 8 (3 active, 7 standby): Daily =3×$15=$45  ⟹  = 3 \times \text{\textdollar}15 = \text{\textdollar}45 \implies Weekly =6×45=$270= 6 \times 45 = \text{\textdollar}270.

    • Month 2 Total =2×$1,260+2×$270=$2,520+$540=$3,060= 2 \times \text{\textdollar}1,260 + 2 \times \text{\textdollar}270 = \text{\textdollar}2,520 + \text{\textdollar}540 = \text{\textdollar}3,060.

  3. Month 3 (Weeks 9 to 12):

    • Weeks 9 & 11 (6 active, 4 standby): Daily =6×$30=$180  ⟹  = 6 \times \text{\textdollar}30 = \text{\textdollar}180 \implies Weekly =6×180=$1,080= 6 \times 180 = \text{\textdollar}1,080.

    • Weeks 10 & 12 (4 active, 6 standby): Daily =4×$15=$60  ⟹  = 4 \times \text{\textdollar}15 = \text{\textdollar}60 \implies Weekly =6×60=$360= 6 \times 60 = \text{\textdollar}360.

    • Month 3 Total =2×$1,080+2×$360=$2,160+$720=$2,880= 2 \times \text{\textdollar}1,080 + 2 \times \text{\textdollar}360 = \text{\textdollar}2,160 + \text{\textdollar}720 = \text{\textdollar}2,880.

  4. Month 4 (Weeks 13 to 16):

    • Weeks 13 & 15 (8 active, 0 standby): Daily =8×$30=$240  ⟹  = 8 \times \text{\textdollar}30 = \text{\textdollar}240 \implies Weekly =6×240=$1,440= 6 \times 240 = \text{\textdollar}1,440.

    • Weeks 14 & 16 (0 active, 8 standby): Daily =0×$15=$0  ⟹  = 0 \times \text{\textdollar}15 = \text{\textdollar}0 \implies Weekly =$0= \text{\textdollar}0.

    • Month 4 Total =2×$1,440+0=$2,880= 2 \times \text{\textdollar}1,440 + 0 = \text{\textdollar}2,880.

  5. Average Monthly Salary:

    Total for 4 Months=$2,160+$3,060+$2,880+$2,880=$10,980\text{Total for 4 Months} = \text{\textdollar}2,160 + \text{\textdollar}3,060 + \text{\textdollar}2,880 + \text{\textdollar}2,880 = \text{\textdollar}10,980

    Average=$10,9804=$2,745\text{Average} = \frac{\text{\textdollar}10,980}{4} = \mathbf{\text{\textdollar}2,745}

Hence, the average monthly salary was $2,745.

Question 39 · CAT Level

Directions for Questions 37 to 40

Chief Telemetry Engineer Brandon logs his daily shift hours during an extended 16-week pre-season hypercar testing program. On any given working day, Brandon logs xx hours of Active Telemetry Analysis and yy hours of Standby Monitoring. This schedule holds for one full week, followed by an exactly inverted schedule the subsequent week, alternating every week for four weeks (one month). Every fifth week (the beginning of each new month), a new baseline testing pattern is established.

Whenever Brandon logs more Active Telemetry Analysis hours than Standby Monitoring hours in a week (x>yx > y), his hourly compensation rate is twice what he earns per hour when Standby Monitoring hours exceed Active Telemetry Analysis hours (y>xy > x).

The following table displays Brandon's daily schedule for the benchmark weeks 1, 5, 9, and 13:

Shift Type1st Week5th Week9th Week13th Week
Standby Monitoring (hours/day)2340
Active Telemetry (hours/day)5768

(Note: A testing week consists of 6 working days, and a testing month consists of exactly 4 weeks.)

Beginning with the 9th week, a new operations manager instituted a revised policy: a deduction of 10waschargedforeveryhourofStandbyMonitoring,whilethebaseactivehourlyratewasincreasedto10 was charged for every hour of Standby Monitoring, while the base active hourly rate was increased to 40 per active hour (and $20 per active hour when standby exceeded active work). What was the net change in Brandon's total salary for the 3rd month compared to the standard payment structure?

  1. A
  2. B
  3. C
  4. D
Show answer and explanation

Answer: (D) $240

Step-by-Step Deduction:

  1. Under the standard policy, Month 3 salary =$2,880= \text{\textdollar}2,880.

  2. Revised Scheme for Month 3 (Weeks 9 to 12):

    • Weeks 9 & 11 (6 hrs active, 4 hrs standby):

      • Active earnings =6×$40=$240= 6 \times \text{\textdollar}40 = \text{\textdollar}240/day.

      • Standby deduction =4×$10=$40= 4 \times \text{\textdollar}10 = \text{\textdollar}40/day.

      • Net daily wage =$240−$40=$200= \text{\textdollar}240 - \text{\textdollar}40 = \text{\textdollar}200/day.

      • Weekly wage (6 days) =6×$200=$1,200= 6 \times \text{\textdollar}200 = \text{\textdollar}1,200/week.

    • Weeks 10 & 12 (4 hrs active, 6 hrs standby):

      • Active earnings =4×$20=$80= 4 \times \text{\textdollar}20 = \text{\textdollar}80/day.

      • Standby deduction =6×$10=$60= 6 \times \text{\textdollar}10 = \text{\textdollar}60/day.

      • Net daily wage =$80−$60=$20= \text{\textdollar}80 - \text{\textdollar}60 = \text{\textdollar}20/day.

      • Weekly wage (6 days) =6×$20=$120= 6 \times \text{\textdollar}20 = \text{\textdollar}120/week.

    • Total revised salary for Month 3:

      New Month 3=2×$1,200+2×$120=$2,400+$240=$2,640\text{New Month 3} = 2 \times \text{\textdollar}1,200 + 2 \times \text{\textdollar}120 = \text{\textdollar}2,400 + \text{\textdollar}240 = \text{\textdollar}2,640

  3. Net Change in Salary:

    Change=$2,880−$2,640=$240\text{Change} = \text{\textdollar}2,880 - \text{\textdollar}2,640 = \mathbf{\text{\textdollar}240}

Hence, Brandon's salary for the 3rd month decreased by $240.

Question 40 · CAT Level

Directions for Questions 37 to 40

Chief Telemetry Engineer Brandon logs his daily shift hours during an extended 16-week pre-season hypercar testing program. On any given working day, Brandon logs xx hours of Active Telemetry Analysis and yy hours of Standby Monitoring. This schedule holds for one full week, followed by an exactly inverted schedule the subsequent week, alternating every week for four weeks (one month). Every fifth week (the beginning of each new month), a new baseline testing pattern is established.

Whenever Brandon logs more Active Telemetry Analysis hours than Standby Monitoring hours in a week (x>yx > y), his hourly compensation rate is twice what he earns per hour when Standby Monitoring hours exceed Active Telemetry Analysis hours (y>xy > x).

The following table displays Brandon's daily schedule for the benchmark weeks 1, 5, 9, and 13:

Shift Type1st Week5th Week9th Week13th Week
Standby Monitoring (hours/day)2340
Active Telemetry (hours/day)5768

(Note: A testing week consists of 6 working days, and a testing month consists of exactly 4 weeks.)

Taking into account the standard policy for Months 1 and 2 and the revised manager policy for Months 3 and 4, what were Brandon's cumulative total earnings at the end of the 16-week testing program?

  1. A

    $10,980

  2. B

    $11,700

  3. C

    $12,600

  4. D

    $10,740

Show answer and explanation

Answer: (D) $10,740

Cumulative Earnings Compilation:

  1. Month 1 (Standard): $2,160\text{\textdollar}2,160

  2. Month 2 (Standard): $3,060\text{\textdollar}3,060

  3. Month 3 (Revised): $2,640\text{\textdollar}2,640

  4. Month 4 (Revised - Weeks 13 to 16):

    • Weeks 13 & 15 (8 hrs active, 0 hrs standby):

      • Active earnings =8×$40=$320= 8 \times \text{\textdollar}40 = \text{\textdollar}320/day.

      • Standby deduction =0= 0.

      • Net daily wage =$320= \text{\textdollar}320/day   ⟹  \implies Weekly =6×320=$1,920= 6 \times 320 = \text{\textdollar}1,920/week.

    • Weeks 14 & 16 (0 hrs active, 8 hrs standby):

      • Active earnings =0= 0.

      • Standby deduction =8×$10=$80= 8 \times \text{\textdollar}10 = \text{\textdollar}80/day.

      • Net daily wage =−$80= -\text{\textdollar}80/day   ⟹  \implies Weekly =6×(−80)=−$480= 6 \times (-80) = -\text{\textdollar}480/week.

    • Total revised salary for Month 4:

      New Month 4=2×$1,920+2×(−$480)=$3,840−$960=$2,880\text{New Month 4} = 2 \times \text{\textdollar}1,920 + 2 \times (-\text{\textdollar}480) = \text{\textdollar}3,840 - \text{\textdollar}960 = \text{\textdollar}2,880

  5. Grand Total for 16 Weeks:

    Total=$2,160+$3,060+$2,640+$2,880=$10,740\text{Total} = \text{\textdollar}2,160 + \text{\textdollar}3,060 + \text{\textdollar}2,640 + \text{\textdollar}2,880 = \mathbf{\text{\textdollar}10,740}

Hence, Brandon's cumulative total earnings were $10,740.

Question 41 · CAT Level

Directions for Questions 41 to 45

An esports hardware lab utilizes two automated precision fabrication units—Unit Alpha and Unit Beta—to manufacture tournament-grade peripherals: Model P Pro Gamepads and Model Q Pro Headsets. Each unit can operate independently for up to 8 hours (480 minutes) per production day. The production time (in minutes) required by each unit to fabricate one finished peripheral is summarized in the table below:

PeripheralUnit Alpha (min/unit)Unit Beta (min/unit)
Model P (Pro Gamepad)108
Model Q (Pro Headset)66

What is the maximum total number of peripheral units that can be manufactured across both units in one 8-hour production day?

  1. A

    140

  2. B

    160

  3. C

    120

  4. D

    180

Show answer and explanation

Answer: (B) 160

Step-by-Step Deduction:

  1. To maximize total unit output, both machines should dedicate all available time to the product that takes the least time per unit.

  2. Producing Model Q takes only 6 minutes on both Unit Alpha and Unit Beta, which is strictly less than Model P (10 min on Alpha, 8 min on Beta).

  3. Daily production capacity on Model Q:

    • Unit Alpha: 4806=80 units\frac{480}{6} = 80\text{ units}.

    • Unit Beta: 4806=80 units\frac{480}{6} = 80\text{ units}.

  4. Maximum total units =80+80=160 units= 80 + 80 = \mathbf{160\text{ units}}.

Question 42 · CAT Level

Directions for Questions 41 to 45

An esports hardware lab utilizes two automated precision fabrication units—Unit Alpha and Unit Beta—to manufacture tournament-grade peripherals: Model P Pro Gamepads and Model Q Pro Headsets. Each unit can operate independently for up to 8 hours (480 minutes) per production day. The production time (in minutes) required by each unit to fabricate one finished peripheral is summarized in the table below:

PeripheralUnit Alpha (min/unit)Unit Beta (min/unit)
Model P (Pro Gamepad)108
Model Q (Pro Headset)66

If Unit Alpha operates at half its normal efficiency, what is the maximum total number of peripheral units that can be produced in one day, given that at least one unit of each model must be produced?

  1. A

    96

  2. B

    89

  3. C

    100

  4. D

    119

Show answer and explanation

Answer: (D) 119

Step-by-Step Deduction:

  1. At half efficiency, Unit Alpha requires:

    • Model P: 2×10=20 minutes2 \times 10 = 20\text{ minutes}.

    • Model Q: 2×6=12 minutes2 \times 6 = 12\text{ minutes}.

    Unit Beta remains at normal efficiency: P takes 8 min, Q takes 6 min.

  2. To satisfy the constraint of producing at least one unit of Model P most efficiently, manufacture 1 unit of Model P on Unit Beta (takes 8 min vs 20 min on Alpha).

  3. Time remaining on Unit Beta =480−8=472 minutes= 480 - 8 = 472\text{ minutes}.

    • In this remaining time, produce Model Q on Unit Beta: ⌊4726⌋=78 units\lfloor \frac{472}{6} \rfloor = 78\text{ units} (leaving 472−78×6=4 min472 - 78 \times 6 = 4\text{ min} idle).
  4. To maximize remaining output on Unit Alpha, produce exclusively Model Q (takes 12 min vs 20 min):

    • Units of Model Q on Unit Alpha =48012=40 units= \frac{480}{12} = 40\text{ units}.
  5. Total units produced across the facility:

    Total=1 (Model P)+78 (Model Q on Beta)+40 (Model Q on Alpha)=119 units\text{Total} = 1\text{ (Model P)} + 78\text{ (Model Q on Beta)} + 40\text{ (Model Q on Alpha)} = \mathbf{119\text{ units}}

Hence, the maximum number of units produced is 119.

Question 43 · CAT Level

Directions for Questions 41 to 45

An esports hardware lab utilizes two automated precision fabrication units—Unit Alpha and Unit Beta—to manufacture tournament-grade peripherals: Model P Pro Gamepads and Model Q Pro Headsets. Each unit can operate independently for up to 8 hours (480 minutes) per production day. The production time (in minutes) required by each unit to fabricate one finished peripheral is summarized in the table below:

PeripheralUnit Alpha (min/unit)Unit Beta (min/unit)
Model P (Pro Gamepad)108
Model Q (Pro Headset)66

What is the minimum total number of machine hours required across the facility to produce exactly 30 units of Model P and 25 units of Model Q?

  1. A

    6 hr 30 min

  2. B

    7 hr 24 min

  3. C

    6 hr 48 min

  4. D

    4 hr 6 min

Show answer and explanation

Answer: (A) 6 hr 30 min

Step-by-Step Deduction:

  1. To minimize total machine time, assign each model to the machine that produces it with the least time:

    • Model P is faster on Unit Beta (8 min/unit vs 10 min/unit on Alpha). Assign all 30 units of Model P to Unit Beta.

      Time for Model P=30×8=240 minutes=4 hours\text{Time for Model P} = 30 \times 8 = 240\text{ minutes} = 4\text{ hours}

    • Model Q takes 6 minutes on both units. Assign all 25 units of Model Q to Unit Alpha.

      Time for Model Q=25×6=150 minutes=2.5 hours\text{Time for Model Q} = 25 \times 6 = 150\text{ minutes} = 2.5\text{ hours}

  2. Total machine time across both units:

    Total Time=240+150=390 minutes=6 hr 30 min\text{Total Time} = 240 + 150 = 390\text{ minutes} = \mathbf{6\text{ hr } 30\text{ min}}

Hence, the least machine time required is 6 hr 30 min.

Question 44 · CAT Level

Directions for Questions 41 to 45

An esports hardware lab utilizes two automated precision fabrication units—Unit Alpha and Unit Beta—to manufacture tournament-grade peripherals: Model P Pro Gamepads and Model Q Pro Headsets. Each unit can operate independently for up to 8 hours (480 minutes) per production day. The production time (in minutes) required by each unit to fabricate one finished peripheral is summarized in the table below:

PeripheralUnit Alpha (min/unit)Unit Beta (min/unit)
Model P (Pro Gamepad)108
Model Q (Pro Headset)66

If the total number of manufactured units of Model P must be exactly three times the number of units of Model Q, what is the maximum allowable idle time across both units to maximize the total number of peripherals produced?

  1. A

    0 min

  2. B

    24 min

  3. C

    1 hr

  4. D

    2 hr

Show answer and explanation

Answer: (A) 0 min

Step-by-Step Deduction:

  1. We need NP=3NQN_P = 3 N_Q.

  2. To maximize output, utilize Unit Beta entirely for Model P (since Beta is faster for P):

    • Units of P on Beta =4808=60 units= \frac{480}{8} = 60\text{ units} (0 min idle0\text{ min idle} on Beta).
  3. For these 60 units of P, we require 603=20 units\frac{60}{3} = 20\text{ units} of Model Q.

    • Producing 20 units of Q on Unit Alpha takes 20×6=120 minutes20 \times 6 = 120\text{ minutes}.
  4. Time remaining on Unit Alpha =480−120=360 minutes= 480 - 120 = 360\text{ minutes}.

  5. To maintain the 3:13:1 ratio on Unit Alpha, manufacture batches of (3P+1Q)(3P + 1Q):

    • Time for 1 batch on Alpha =3×10 min+1×6 min=36 minutes= 3 \times 10\text{ min} + 1 \times 6\text{ min} = 36\text{ minutes}.

    • In 360 minutes, Unit Alpha can complete exactly:

      36036=10 complete batches\frac{360}{36} = 10\text{ complete batches}

      leaving exactly 360−10×36=0 minutes idle360 - 10 \times 36 = 0\text{ minutes idle}!

  6. Total units produced: P=60+30=90 unitsP = 60 + 30 = 90\text{ units}, Q=20+10=30 unitsQ = 20 + 10 = 30\text{ units} (ratio 90:30=3:190:30 = 3:1).

  7. Total idle time across both units =0+0=0 min= 0 + 0 = \mathbf{0\text{ min}}.

Question 45 · CAT Level

Directions for Questions 41 to 45

An esports hardware lab utilizes two automated precision fabrication units—Unit Alpha and Unit Beta—to manufacture tournament-grade peripherals: Model P Pro Gamepads and Model Q Pro Headsets. Each unit can operate independently for up to 8 hours (480 minutes) per production day. The production time (in minutes) required by each unit to fabricate one finished peripheral is summarized in the table below:

PeripheralUnit Alpha (min/unit)Unit Beta (min/unit)
Model P (Pro Gamepad)108
Model Q (Pro Headset)66

If equal quantities of Model P and Model Q are to be produced, which of the following production allocations represents the least efficient method (yielding the lowest output per unit of idle time)?

  1. A

    48 of each with 3 min idle time

  2. B

    64 of each with 12 min idle time

  3. C

    53 of each with 10 min idle time

  4. D

    71 of each with 9 min idle time

Show answer and explanation

Answer: (C) 53 of each with 10 min idle time

Step-by-Step Deduction:

  1. Efficiency is defined as production output per unit of idle time (or conversely, the method that produces the fewest units for a given normalized idle time).

  2. Normalize the idle times to a common basis by finding the LCM of the idle times (3,12,10,9)(3, 12, 10, 9):

    LCM(3,12,10,9)=180 minutes\text{LCM}(3, 12, 10, 9) = 180\text{ minutes}

  3. Calculate the normalized output produced for 180 minutes of idle time across each option:

    • Option (1): 48×(1803)=48×60=2,880 units48 \times \left(\frac{180}{3}\right) = 48 \times 60 = 2,880\text{ units}.

    • Option (2): 64×(18012)=64×15=960 units64 \times \left(\frac{180}{12}\right) = 64 \times 15 = 960\text{ units}.

    • Option (3): 53×(18010)=53×18=954 units53 \times \left(\frac{180}{10}\right) = 53 \times 18 = \mathbf{954\text{ units}}.

    • Option (4): 71×(1809)=71×20=1,420 units71 \times \left(\frac{180}{9}\right) = 71 \times 20 = 1,420\text{ units}.

  4. Option (3) yields only 954 units for 180 minutes of idle time, which is strictly the lowest output per unit idle time.

Therefore, 53 of each with 10 min idle time represents the least efficient production method.

Try real CAT questions

Study this concept with interactive practice in PrepSoc.

Open the concept library