Free CAT library

Direct, Inverse & Joint Variation Models

Formulate physical and industrial relationships through direct, inverse, and joint variation laws, utilizing the decimal multiplier pipeline for instant multi-variable percentage scaling without computing constants.

1. The Story & Mental Model: Tethers, Seesaws & The Multi-Dimensional Turbine

Think of physical quantities in the real world as interconnected elements of a mechanical machine:

  • Direct Variation (A∝BA \propto B): The Elastic Tether.

    Pull an elastic band twice as hard, and it stretches twice as far. If you double the force, the elongation doubles. AA and BB march together in lockstep; their quotient AB=k\frac{A}{B} = k is permanently fixed.

  • Inverse Variation (A∝1BA \propto \frac{1}{B}): The Mechanical Seesaw.

    Think of a playground seesaw. If a heavier adult sits on one side, they must sit closer to the pivot to balance a lighter child sitting far away. As one variable rises, the other is forced down; their product A⋅B=kA \cdot B = k is permanently fixed.

  • Joint Variation (A∝BmCpDqA \propto \frac{B^m C^p}{D^q}): The Offshore Wind Turbine.

    Consider an enormous offshore wind turbine generating electrical power (PP).

    • If air density (ρ\rho) increases, power increases directly (P∝ρP \propto \rho).

    • If blade radius (RR) increases, the swept circular area expands quadratically (P∝R2P \propto R^2).

    • If wind velocity (vv) increases, kinetic energy per second explodes as the cube of velocity (P∝v3P \propto v^3).

    • If electrical transmission line resistance (rr) increases, power delivered decreases inversely (P∝1rP \propto \frac{1}{r}).

    Every input variable exerts an exponential, multiplicative pull on the final output:

    P=k⋅ρ⋅R2⋅v3rP = k \cdot \frac{\rho \cdot R^2 \cdot v^3}{r}

Multiplicative Thinking vs Additive Thinking

In competitive exams like CAT and IPMAT, students who approach variation problems with additive thinking get crushed by lengthy algebra.

In variation, changes are multipliers (MM), not additive increments! The variation constant kk is merely a unit-converting bridge between dimensions. When comparing two states of the same physical system, kk cancels out identically:

A2A1=(B2B1)m(C2C1)p(D1D2)q\frac{A_2}{A_1} = \left(\frac{B_2}{B_1}\right)^m \left(\frac{C_2}{C_1}\right)^p \left(\frac{D_1}{D_2}\right)^q

Never spend precious exam seconds calculating kk if the question only asks for percentage changes or relative ratios!


2. The CAT Question Blueprint: How Exam Setters Disguise Variation Models

Exam setters design variation questions around four distinct analytical frameworks:

  1. The Multi-Parameter Engineering Law:

    Questions set in fluid dynamics, mechanical friction, or thermodynamic heat dissipation (H∝I2RtH \propto I^2 R t). You are given a baseline calibration state (A1,B1,C1)(A_1, B_1, C_1) to establish system parameters, and asked to compute the response when multiple operating variables shift simultaneously.

  2. The Compound Percentage Shock Pipeline:

    Variables BB and CC experience independent percentage increases and decreases (e.g., BB increases by +20%+20\%, CC decreases by −10%-10\%). You must compute the net percentage change in AA where A∝B2C3A \propto \frac{B^2}{C^3}. High-scorers apply decimal multipliers directly in a single line.

  3. The Multi-Variable Machine & Workforce Productivity Model:

    Factory output WW varies jointly with the number of machines NN, their operating efficiency η\eta, and the square root of uptime hours H\sqrt{H}, while varying inversely with defect tolerance τ\tau.

  4. The Dual-Component Optimization Model (Cruising Speed Economics):

    A vehicle or vessel's energy consumption per kilometer has two opposing components: propulsion energy (which varies directly with v2v^2) and hotel/operational overhead per kilometer (which varies inversely with vv). Examiners ask for the cruising speed that minimizes total consumption per kilometer.


3. Core Concepts, Formulae & Derivations

A. Direct Variation

Two variables yy and xx vary directly (y∝xy \propto x) if their ratio remains constant:

y=kx  ⟺  yx=k(k≠0)y = kx \iff \frac{y}{x} = k \quad (k \neq 0)

For any two pairs of values (x1,y1)(x_1, y_1) and (x2,y2)(x_2, y_2):

y1x1=y2x2  ⟹  y2=y1(x2x1)\frac{y_1}{x_1} = \frac{y_2}{x_2} \implies y_2 = y_1 \left(\frac{x_2}{x_1}\right)

B. Inverse Variation

Two variables yy and xx vary inversely (y∝1xy \propto \frac{1}{x}) if their product remains constant:

y=kx  ⟺  xy=k(k≠0)y = \frac{k}{x} \iff xy = k \quad (k \neq 0)

For any two pairs of values (x1,y1)(x_1, y_1) and (x2,y2)(x_2, y_2):

x1y1=x2y2  ⟹  y2=y1(x1x2)x_1 y_1 = x_2 y_2 \implies y_2 = y_1 \left(\frac{x_1}{x_2}\right)

Notice the reciprocal inversion of the coordinate ratio: x1x2\frac{x_1}{x_2}, NOT x2x1\frac{x_2}{x_1}.

C. Joint Variation

If AA varies directly as BpB^p and CqC^q, and inversely as DrD^r:

A∝Bp⋅CqDr  ⟺  A=k⋅Bp⋅CqDrA \propto \frac{B^p \cdot C^q}{D^r} \iff A = k \cdot \frac{B^p \cdot C^q}{D^r}

State-to-State Ratio Transformation:

A2A1=(B2B1)p⋅(C2C1)q⋅(D1D2)r\frac{A_2}{A_1} = \left(\frac{B_2}{B_1}\right)^p \cdot \left(\frac{C_2}{C_1}\right)^q \cdot \left(\frac{D_1}{D_2}\right)^r

D. The Decimal Multiplier Pipeline for Percentage Shifts

Let each independent variable undergo a percentage change represented by its decimal multiplier:

  • B2=MB⋅B1B_2 = M_B \cdot B_1

  • C2=MC⋅C1C_2 = M_C \cdot C_1

  • D2=MD⋅D1D_2 = M_D \cdot D_1

Then the final multiplier for AA is:

MA=A2A1=MBp⋅MCqMDrM_A = \frac{A_2}{A_1} = \frac{M_B^p \cdot M_C^q}{M_D^r}

The net percentage change in AA is given by:

%ΔA=(MA−1)×100%\%\Delta A = (M_A - 1) \times 100\%


4. Common Pitfalls & Speed Shortcuts

The Vanishing Constant Trap:

Do NOT solve for kk if the question asks: "By what percentage does the output increase?"

Solving for kk adds 45-60 seconds of unnecessary arithmetic. Multiply the fractional or decimal multipliers directly.

The Inverse Ratio Inversion Blunder:

In inverse variation, students often accidentally write y2y1=x2x1\frac{y_2}{y_1} = \frac{x_2}{x_1} instead of x1x2\frac{x_1}{x_2}.

Always remember: Inverse means upside down!

Speed Shortcut: The Direct Power Multiplier:

  • Variable squared increases by +10%+10\%: Multiplier is (1.10)2=1.21(1.10)^2 = 1.21 (+21%+21\%).
  • Variable squared decreases by −20%-20\%: Multiplier is (0.80)2=0.64(0.80)^2 = 0.64 (−36%-36\%).
  • Variable with square root increases by +44%+44\%: Multiplier is 1.44=1.20\sqrt{1.44} = 1.20 (+20%+20\%).

Formulas

Direct Variation Law

A∝B  ⟺  A=kB  ⟺  A1B1=A2B2A \propto B \iff A = kB \iff \frac{A_1}{B_1} = \frac{A_2}{B_2}

Quotient is invariant; variables scale in direct proportion
Inverse Variation Law

A∝1B  ⟺  AB=k  ⟺  A1B1=A2B2A \propto \frac{1}{B} \iff AB = k \iff A_1 B_1 = A_2 B_2

Product is invariant; one variable scales inversely with the other
Joint Multi-Variable Law

A=kBpCqDr  ⟹  A2A1=(B2B1)p(C2C1)q(D1D2)rA = k \frac{B^p C^q}{D^r} \implies \frac{A_2}{A_1} = \left(\frac{B_2}{B_1}\right)^p \left(\frac{C_2}{C_1}\right)^q \left(\frac{D_1}{D_2}\right)^r

Multiplicative scaling across all exponents
Decimal Multiplier Pipeline

MA=MBp⋅MCqMDr  ⟹  %ΔA=(MA−1)×100%M_A = \frac{M_B^p \cdot M_C^q}{M_D^r} \implies \%\Delta A = (M_A - 1) \times 100\%

Bypasses constant k completely for percentage shift questions

Traps and tips

  • Never calculate the constant of variation k when only percentage changes or ratios are requested.
  • For inverse relationships, invert the ratio: A2 / A1 = D1 / D2.
  • Watch the exponent: A 20% increase in velocity (M = 1.2) causes a 44% increase in drag force (M^2 = 1.44) and a 72.8% increase in kinetic power (M^3 = 1.728).
  • Dual-component optimization: To minimize E(v) = av^2 + b/v, take derivative E'(v) = 2av - b/v^2 = 0 => v^3 = b / (2a).

Solved examples

Example 4.1: Aerodynamic Drag & Quadratic Velocity in High-Speed Rail

The aerodynamic resistance drag force FF opposing a high-speed bullet train varies jointly as its frontal cross-sectional area AA and the square of its cruising speed vv (F∝Av2F \propto A v^2). When traveling at 120 km/h120\text{ km/h}, a train prototype with a frontal area of 12 m212\text{ m}^2 experiences a measured drag force of 8,640 Newtons8,640\text{ Newtons}.

(a) Determine the constant of variation kk in consistent metric units.

(b) Using the ratio scaling method, calculate the drag force experienced by an expanded commercial train with frontal area 15 m215\text{ m}^2 traveling at 160 km/h160\text{ km/h}.

Show solution

Let us model the aerodynamic drag law systematically.

Part (a): Compute the variation constant kk

The physical governing equation is:

F=k⋅A⋅v2F = k \cdot A \cdot v^2

Substitute baseline values: F1=8,640 NF_1 = 8,640\text{ N}, A1=12 m2A_1 = 12\text{ m}^2, v1=120 km/hv_1 = 120\text{ km/h}:

8,640=k×12×(120)28,640 = k \times 12 \times (120)^2

8,640=k×12×14,4008,640 = k \times 12 \times 14,400

8,640=172,800k8,640 = 172,800 k

k=8,640172,800=120=0.05 N⋅h2/(m2⋅km2)k = \frac{8,640}{172,800} = \frac{1}{20} = 0.05\text{ N} \cdot \text{h}^2 / (\text{m}^2 \cdot \text{km}^2)

Part (b): Calculate F2F_2 using the Ratio Scaling Shortcut

Instead of recalculating from scratch, write the state-to-state ratio:

F2F1=(A2A1)⋅(v2v1)2\frac{F_2}{F_1} = \left(\frac{A_2}{A_1}\right) \cdot \left(\frac{v_2}{v_1}\right)^2

Substitute given values: A2=15,A1=12,v2=160,v1=120A_2 = 15, A_1 = 12, v_2 = 160, v_1 = 120:

A2A1=1512=54\frac{A_2}{A_1} = \frac{15}{12} = \frac{5}{4}

v2v1=160120=43  ⟹  (v2v1)2=(43)2=169\frac{v_2}{v_1} = \frac{160}{120} = \frac{4}{3} \implies \left(\frac{v_2}{v_1}\right)^2 = \left(\frac{4}{3}\right)^2 = \frac{16}{9}

Now combine the factors:

F2F1=54×169=5×49=209\frac{F_2}{F_1} = \frac{5}{4} \times \frac{16}{9} = \frac{5 \times 4}{9} = \frac{20}{9}

Compute the new drag force:

F2=F1×209=8,640×209=960×20=19,200 NewtonsF_2 = F_1 \times \frac{20}{9} = 8,640 \times \frac{20}{9} = 960 \times 20 = 19,200\text{ Newtons}

Cross-Check using kk:

F2=0.05×15×(160)2=0.75×25,600=19,200 NF_2 = 0.05 \times 15 \times (160)^2 = 0.75 \times 25,600 = 19,200\text{ N}

Both methods match with 100% precision.

Takeaway: In joint variation with powers, express new values as products of coordinate ratios, simplifying fractions before multiplying.

Example 4.2: Joint Percentage Scaling in Surgical Illumination

The illumination intensity II on an operating table delivered by an overhead surgical lamp varies directly as the luminous source power PP and inversely as the square of the vertical distance dd from the table (I∝Pd2I \propto \frac{P}{d^2}). During a specialized procedure, the biomedical engineering team increases the source power by 28%28\% and simultaneously lowers the lamp so that its distance to the table decreases by 20%20\%. Determine the exact percentage increase in illumination intensity experienced on the operating table.

Show solution

We solve this without defining arbitrary numbers or solving for kk, using the Decimal Multiplier Pipeline.

Step 1: Identify power relationships and multipliers

Governing equation:

I=k⋅Pd2I = k \cdot \frac{P}{d^2}

  • Source power PP increases by +28%+28\%:

    MP=1+0.28=1.28=128100=3225M_P = 1 + 0.28 = 1.28 = \frac{128}{100} = \frac{32}{25}

  • Distance dd decreases by −20%-20\%:

    Md=1−0.20=0.80=45M_d = 1 - 0.20 = 0.80 = \frac{4}{5}

Step 2: Compute the squared distance multiplier

Since dd appears in the denominator raised to power 22:

Md2=(0.80)2=0.64=1625M_d^2 = (0.80)^2 = 0.64 = \frac{16}{25}

Step 3: Calculate the net intensity multiplier MIM_I

MI=MPMd2=1.280.64=2.00M_I = \frac{M_P}{M_d^2} = \frac{1.28}{0.64} = 2.00

Step 4: Compute the percentage change

%ΔI=(MI−1)×100%=(2.00−1)×100%=+100%\%\Delta I = (M_I - 1) \times 100\% = (2.00 - 1) \times 100\% = +100\%

Conclusion:

The illumination intensity on the operating table exactly doubles, representing a 100%100\% increase.

Takeaway: Use decimal multipliers directly for joint percentage problems; M I = M P / (M d)^2 yields the exact scaling factor in one line.

Example 4.3: Multi-Variable Workforce and Robotic Assembly Law

In an advanced semiconductor fabrication facility, hourly microchip output WW varies jointly as the number of robotic arms RR, the square root of their operational frequency ff, and inversely as the micrometer defect tolerance threshold τ\tau (W∝RfτW \propto \frac{R \sqrt{f}}{\tau}).

Baseline records show that 1616 robotic arms operating at frequency 100 Hz100\text{ Hz} with defect tolerance threshold 0.05 \mum0.05\text{ \mu m} produce 3,2003,200 microchips per hour. If the production line is reconfigured to 2525 robotic arms operating at 144 Hz144\text{ Hz} with a tightened defect tolerance of 0.04 \mum0.04\text{ \mu m}, calculate the new hourly microchip output.

Show solution

Let us apply the joint variation state-to-state scaling formula.

Step 1: Formulate the ratio equation

Given:

W=k⋅RfτW = k \cdot \frac{R \sqrt{f}}{\tau}

The state ratio is:

W2W1=(R2R1)⋅f2f1⋅(τ1τ2)\frac{W_2}{W_1} = \left(\frac{R_2}{R_1}\right) \cdot \sqrt{\frac{f_2}{f_1}} \cdot \left(\frac{\tau_1}{\tau_2}\right)

Notice that tolerance τ\tau is inverted because it varies inversely.

Step 2: Compute individual component ratios

  • Robotic arms ratio:

    R2R1=2516\frac{R_2}{R_1} = \frac{25}{16}

  • Frequency square root ratio:

    f2f1=144100=1210=65\sqrt{\frac{f_2}{f_1}} = \sqrt{\frac{144}{100}} = \frac{12}{10} = \frac{6}{5}

  • Tolerance inverted ratio:

    τ1τ2=0.050.04=54\frac{\tau_1}{\tau_2} = \frac{0.05}{0.04} = \frac{5}{4}

Step 3: Multiply all component ratios

W2W1=2516×65×54\frac{W_2}{W_1} = \frac{25}{16} \times \frac{6}{5} \times \frac{5}{4}

Cancel the 55 in numerator and denominator:

W2W1=25×616×4=15064=7532\frac{W_2}{W_1} = \frac{25 \times 6}{16 \times 4} = \frac{150}{64} = \frac{75}{32}

Step 4: Compute final microchip output W2W_2

Given W1=3,200W_1 = 3,200:

W2=3,200×7532=100×75=7,500 microchips per hourW_2 = 3,200 \times \frac{75}{32} = 100 \times 75 = 7,500\text{ microchips per hour}

Takeaway: For variables appearing under radicals or in denominators, calculate each individual ratio factor separately before finding the net product.

Example 4.4: Inverse Square Law with Point Shift in Cellular Coverage

The signal intensity SS from a cellular base station tower varies inversely as the square of the distance dd from the tower (S∝1d2S \propto \frac{1}{d^2}). A telecom field-test vehicle moves directly away from the tower from Point A to Point B along a straight road, increasing its distance from the tower by 50 meters50\text{ meters}. As a result of this movement, the measured signal intensity drops by 64%64\%. Find the initial distance of Point A from the transmission tower.

Show solution

Let us model the inverse square relationship with a distance shift.

Step 1: Set up the governing inverse square ratio

Let the initial distance from the tower to Point A be d1=dd_1 = d meters.

The new distance to Point B is d2=(d+50)d_2 = (d + 50) meters.

The signal intensity drops by 64%64\%, meaning the final intensity is:

S2=(1−0.64)S1=0.36S1  ⟹  S2S1=0.36=36100=925S_2 = (1 - 0.64) S_1 = 0.36 S_1 \implies \frac{S_2}{S_1} = 0.36 = \frac{36}{100} = \frac{9}{25}

Step 2: Relate intensity ratio to distance ratio

Since S∝1d2S \propto \frac{1}{d^2}:

S2S1=(d1d2)2\frac{S_2}{S_1} = \left(\frac{d_1}{d_2}\right)^2

Equate the two expressions:

(dd+50)2=925\left(\frac{d}{d + 50}\right)^2 = \frac{9}{25}

Step 3: Extract the square root

Since distances are strictly positive real numbers:

dd+50=925=35\frac{d}{d + 50} = \sqrt{\frac{9}{25}} = \frac{3}{5}

Step 4: Solve for initial distance dd

Cross-multiply:

5d=3(d+50)5d = 3(d + 50)

5d=3d+1505d = 3d + 150

2d=150  ⟹  d=75 meters2d = 150 \implies d = 75\text{ meters}

Verification:

  • Initial distance: d1=75 md_1 = 75\text{ m}.

  • New distance: d2=75+50=125 md_2 = 75 + 50 = 125\text{ m}.

  • Intensity ratio: (75125)2=(35)2=925=0.36=36%\left(\frac{75}{125}\right)^2 = \left(\frac{3}{5}\right)^2 = \frac{9}{25} = 0.36 = 36\%.

  • Drop in intensity: 100%−36%=64%100\% - 36\% = 64\%. Exactly matches!

Takeaway: In inverse square problems with percentage drops, take the square root of the residual percentage (1 - drop) to solve distance shifts linearly.

Example 4.5: Electric Ferry Energy Optimization Curve

An electric passenger ferry's energy consumption per kilometer has two distinct sources:

  1. Propulsion energy per kilometer varies directly as the square of cruising speed vv (Eprop∝v2E_{\text{prop}} \propto v^2).

  2. Auxiliary hotel/air-conditioning electrical load per kilometer varies inversely as cruising speed vv (Eaux∝1vE_{\text{aux}} \propto \frac{1}{v}).

Thus, total energy consumed per kilometer is modeled as E(v)=k1v2+k2vE(v) = k_1 v^2 + \frac{k_2}{v}.

Sea trials show that at 10 knots10\text{ knots}, propulsion consumption is 5 kWh/km5\text{ kWh/km} and auxiliary consumption is 80 kWh/km80\text{ kWh/km} (total 85 kWh/km85\text{ kWh/km}).

(a) Determine the constants k1k_1 and k2k_2.

(b) Find the cruising speed vv that minimizes total energy consumption per kilometer, and compute this minimum energy rate.

Show solution

Let us calibrate the dual-variation model and optimize it.

Part (a): Calibrate constants k1k_1 and k2k_2

Given baseline speed v=10 knotsv = 10\text{ knots}:

  • Propulsion energy:

    Eprop=k1(10)2=100k1=5  ⟹  k1=5100=0.05 kWh/(km⋅knot2)E_{\text{prop}} = k_1 (10)^2 = 100 k_1 = 5 \implies k_1 = \frac{5}{100} = 0.05\text{ kWh}/(\text{km} \cdot \text{knot}^2)

  • Auxiliary energy:

    Eaux=k210=80  ⟹  k2=800 kWh⋅knot/kmE_{\text{aux}} = \frac{k_2}{10} = 80 \implies k_2 = 800\text{ kWh} \cdot \text{knot}/\text{km}

Therefore, the total energy consumption function is:

E(v)=0.05v2+800vE(v) = 0.05 v^2 + \frac{800}{v}

Part (b): Minimize total energy consumption per kilometer

To find the speed vv that minimizes E(v)E(v), differentiate with respect to vv and set to zero:

E′(v)=ddv(0.05v2+800v−1)=2(0.05)v−800v2=0.10v−800v2E'(v) = \frac{d}{dv}\left(0.05 v^2 + 800 v^{-1}\right) = 2(0.05) v - \frac{800}{v^2} = 0.10 v - \frac{800}{v^2}

Set E′(v)=0E'(v) = 0:

0.10v=800v20.10 v = \frac{800}{v^2}

0.10v3=800  ⟹  v3=8000.10=8,0000.10 v^3 = 800 \implies v^3 = \frac{800}{0.10} = 8,000

Extracting the cube root:

v=8,0003=20 knotsv = \sqrt[3]{8,000} = 20\text{ knots}

(Alternatively via AM-GM Inequality: Split 800v\frac{800}{v} into two equal terms 400v+400v\frac{400}{v} + \frac{400}{v} to equate powers: 0.05v2=400v  ⟹  v3=8000  ⟹  v=200.05 v^2 = \frac{400}{v} \implies v^3 = 8000 \implies v = 20).

Compute minimum energy consumption at v=20 knotsv = 20\text{ knots}:

E(20)=0.05(20)2+80020=0.05(400)+40=20+40=60 kWh/kmE(20) = 0.05(20)^2 + \frac{800}{20} = 0.05(400) + 40 = 20 + 40 = 60\text{ kWh/km}

Notice that 60 kWh/km<85 kWh/km60\text{ kWh/km} < 85\text{ kWh/km}.

Conclusion:

The energy-optimal cruising speed is 20 knots20\text{ knots}, yielding a minimum energy rate of 60 kWh/km60\text{ kWh/km}.

Takeaway: Dual variation models of form a v^2 + b/v reach their absolute minimum when the cubic velocity condition v^3 = b/(2a) is satisfied.

Example 4.6: Joint Inverse Variation in Catalytic Reactor Dynamics

In an automated chemical synthesis reactor, the reaction completion time TT varies directly as the fluid batch volume VV and the target temperature rise Δθ\Delta \theta, and inversely as the catalyst mass MM and the square root of reactor operating pressure PP:

T=k⋅V⋅ΔθMPT = k \cdot \frac{V \cdot \Delta \theta}{M \sqrt{P}}

In calibration run 1, a batch with V1=18 LitersV_1 = 18\text{ Liters} and Δθ1=25∘C\Delta \theta_1 = 25^\circ\text{C}, utilizing catalyst mass M1=4 gramsM_1 = 4\text{ grams} under pressure P1=16 atmP_1 = 16\text{ atm}, achieves complete reaction in T1=45 minutesT_1 = 45\text{ minutes}.

In production run 2, the engineers adjust the process parameters to V2=27 LitersV_2 = 27\text{ Liters}, Δθ2=30∘C\Delta \theta_2 = 30^\circ\text{C}, M2=6 gramsM_2 = 6\text{ grams}, and P2=36 atmP_2 = 36\text{ atm}. Calculate the new reaction completion time T2T_2.

Show solution

We execute the solution via coordinate ratio scaling.

Step 1: Set up the multi-variable ratio equation

T2T1=(V2V1)⋅(Δθ2Δθ1)⋅(M1M2)⋅P1P2\frac{T_2}{T_1} = \left(\frac{V_2}{V_1}\right) \cdot \left(\frac{\Delta \theta_2}{\Delta \theta_1}\right) \cdot \left(\frac{M_1}{M_2}\right) \cdot \sqrt{\frac{P_1}{P_2}}

Notice that MM and PP are inverted due to inverse variation.

Step 2: Calculate each coordinate ratio individually

  • Volume ratio:

    V2V1=2718=32\frac{V_2}{V_1} = \frac{27}{18} = \frac{3}{2}

  • Temperature rise ratio:

    Δθ2Δθ1=3025=65\frac{\Delta \theta_2}{\Delta \theta_1} = \frac{30}{25} = \frac{6}{5}

  • Catalyst mass inverted ratio:

    M1M2=46=23\frac{M_1}{M_2} = \frac{4}{6} = \frac{2}{3}

  • Pressure square root inverted ratio:

    P1P2=1636=46=23\sqrt{\frac{P_1}{P_2}} = \sqrt{\frac{16}{36}} = \frac{4}{6} = \frac{2}{3}

Step 3: Multiply all component ratios

T2T1=32×65×23×23\frac{T_2}{T_1} = \frac{3}{2} \times \frac{6}{5} \times \frac{2}{3} \times \frac{2}{3}

Notice cancellations:

  • 32×23=1\frac{3}{2} \times \frac{2}{3} = 1

  • Remaining factors: 65×23=1215=45\frac{6}{5} \times \frac{2}{3} = \frac{12}{15} = \frac{4}{5}

Thus:

T2T1=45\frac{T_2}{T_1} = \frac{4}{5}

Step 4: Compute the new reaction time T2T_2

Given T1=45 minutesT_1 = 45\text{ minutes}:

T2=45×45=9×4=36 minutesT_2 = 45 \times \frac{4}{5} = 9 \times 4 = 36\text{ minutes}

Conclusion:

The new reaction completion time is exactly 36 minutes36\text{ minutes}.

Takeaway: Pair each direct and inverse parameter into a simplified coordinate fraction before multiplying to eliminate multi-step arithmetic errors.

Practice questions

Question 1 · CAT Level

The coal consumption CC of a steam turbine varies directly as the square of operating velocity VV, directly as running distance DD, and inversely as the square root of payload weight WW. If velocity increases by 20%20\%, distance decreases by 25%25\%, and payload weight increases by 44%44\%, what is the net percentage change in coal consumption?

  1. A

    Decreases by 10%10\%

  2. B

    Increases by 8%8\%

  3. C

    Decreases by 12.5%12.5\%

  4. D

    Remains unchanged

Show answer and explanation

Answer: (A) Decreases by 10\%

The variation equation is C=kV2DWC = k \frac{V^2 D}{\sqrt{W}}.

Let initial values be V,D,WV, D, W. The new parameters are V′=1.2VV' = 1.2V, D′=0.75DD' = 0.75D, and W′=1.44WW' = 1.44W.

Evaluating the transformed radical: W′=1.44W=1.2W\sqrt{W'} = \sqrt{1.44W} = 1.2\sqrt{W}.

Hence, the new consumption is C′=k(1.2V)2(0.75D)1.2W=k1.44×0.751.2⋅V2DW=0.90CC' = k \frac{(1.2V)^2 (0.75D)}{1.2\sqrt{W}} = k \frac{1.44 \times 0.75}{1.2} \cdot \frac{V^2 D}{\sqrt{W}} = 0.90 C.

Therefore, coal consumption decreases by exactly 10%10\%.

Question 2 · CAT Level

The reduction in speed of an express electric train varies directly as the square root of the number of carriages attached. With no carriages attached, the maximum speed is 48 km/h48\text{ km/h}, whereas with 1616 carriages, its speed drops to 36 km/h36\text{ km/h}. What is the maximum number of carriages the train can pull while still maintaining forward motion?

  1. A

    255255

  2. B

    256256

  3. C

    224224

  4. D

    250250

Show answer and explanation

Answer: (A) 255

Speed reduction R=knR = k\sqrt{n}, and operating speed is S=48−knS = 48 - k\sqrt{n}.

When n=16n = 16, speed S=36 km/hS = 36\text{ km/h}, so R=48−36=12 km/h  ⟹  12=k16=4k  ⟹  k=3R = 48 - 36 = 12\text{ km/h} \implies 12 = k\sqrt{16} = 4k \implies k = 3.

The locomotive will come to a complete standstill (S=0S = 0) when R=48 km/hR = 48\text{ km/h}.

Setting 3n=48  ⟹  n=16  ⟹  n=2563\sqrt{n} = 48 \implies \sqrt{n} = 16 \implies n = 256 carriages.

To maintain forward motion (S>0S > 0), it can pull at most 256−1=255256 - 1 = 255 carriages.

Question 3 · CAT Level

A variable quantity AA varies directly as the sum of two quantities BB and CC. Here, BB varies directly as xx while CC varies inversely as xx. When x=1x = 1, A=50A = 50, and when x=2x = 2, A=55A = 55. What is the value of AA when x=4x = 4?

  1. A

    8080

  2. B

    87.587.5

  3. C

    92.592.5

  4. D

    9595

Show answer and explanation

Answer: (B) 87.5

Since A=k0(B+C)=k0(k1x+k2/x)A = k_0(B + C) = k_0(k_1 x + k_2/x), we can write A=px+qxA = px + \frac{q}{x} for constants p,qp, q.

For x=1x = 1: p(1)+q1=50  ⟹  p+q=50p(1) + \frac{q}{1} = 50 \implies p + q = 50.

For x=2x = 2: 2p+q2=55  ⟹  4p+q=1102p + \frac{q}{2} = 55 \implies 4p + q = 110.

Subtracting the first equation from the second gives 3p=60  ⟹  p=203p = 60 \implies p = 20, and hence q=30q = 30.

For x=4x = 4: A=20(4)+304=80+7.5=87.5A = 20(4) + \frac{30}{4} = 80 + 7.5 = 87.5.

Question 4 · CAT Level

The illumination from a light source varies directly as its candlepower and inversely as the square of the distance from the source. Two lamps of candlepower 16 cp16\text{ cp} and 36 cp36\text{ cp} are placed 10 meters10\text{ meters} apart. At what distance from the weaker lamp on the straight line connecting them is the illumination received from both lamps identical?

  1. A

    3.5 m3.5\text{ m}

  2. B

    4.0 m4.0\text{ m}

  3. C

    4.5 m4.5\text{ m}

  4. D

    5.0 m5.0\text{ m}

Show answer and explanation

Answer: (B) 4.0 m

Let distance from the 16 cp16\text{ cp} lamp be x metersx\text{ meters}. Then the distance from the 36 cp36\text{ cp} lamp is (10−x) meters(10 - x)\text{ meters}.

Equating illumination from both sources: k⋅16x2=k⋅36(10−x)2\frac{k \cdot 16}{x^2} = \frac{k \cdot 36}{(10 - x)^2}.

Taking the square root on both sides: 4x=610−x\frac{4}{x} = \frac{6}{10 - x}.

Cross-multiplying gives 4(10−x)=6x  ⟹  40−4x=6x  ⟹  10x=40  ⟹  x=4.0 meters4(10 - x) = 6x \implies 40 - 4x = 6x \implies 10x = 40 \implies x = 4.0\text{ meters}.

Thus, equal illumination is achieved at 4 meters4\text{ meters} from the weaker lamp.

Question 5 · CAT Level

The pressure PP of a confined gas varies directly as its absolute temperature TT and inversely as its volume VV. If the volume is compressed by 20%20\% while its absolute temperature increases by 12%12\%, what is the percentage change in the pressure of the gas?

  1. A

    Increases by 40%40\%

  2. B

    Increases by 32%32\%

  3. C

    Increases by 44%44\%

  4. D

    Increases by 35%35\%

Show answer and explanation

Answer: (A) Increases by 40\%

From the given relation, P=kTVP = k \frac{T}{V}.

Let initial values be P,T,VP, T, V. The modified parameters are V′=0.80VV' = 0.80V and T′=1.12TT' = 1.12T.

The new pressure is P′=k1.12T0.80V=1.120.80(kTV)=1.40PP' = k \frac{1.12T}{0.80V} = \frac{1.12}{0.80} \left(k \frac{T}{V}\right) = 1.40 P.

The fractional increase is P′−PP=1.40−1=0.40\frac{P' - P}{P} = 1.40 - 1 = 0.40.

Hence, the pressure increases by exactly 40%40\%.

Try real CAT questions

Study this concept with interactive practice in PrepSoc.

Open the concept library