Free CAT library

Practice Exercise 1 (20 Questions)

20 rigorous practice questions on single and multi-pie donut charts, angular allocations (360° base), cross-metric ratios, optimization constraints, and material distribution caselets across 5 diverse modernized problem sets.

Practice Exercise 1 — Pie & Donut Chart Mastery

This exercise contains 20 comprehensive CAT-style questions spanning 5 diverse problem sets:

  • Set 1 (Questions 1 to 4): Global Enterprise AI Cloud Infrastructure — Analyzing angular degree allocations (360∘360^\circ base) against discrete cluster capacity shares, partition maximization, constraint minimization, and defective hardware recall impacts.

  • Set 2 (Questions 5 to 8): NexLogix Multimodal Freight Logistics — Three-chart comparative evaluation covering volume, revenue, and operating costs, identifying profit margins, breakeven losses, and unit transport cost efficiency.

  • Set 3 (Questions 9 to 12): Apex Semiconductor Foundry — Four-distribution multi-pie framework analyzing wafer fabrication volume, manufacturing expenses, export shipment volume, and commercial shipment revenue under strict audit quality constraints.

  • Set 4 (Questions 13 to 16): Vertex Quantum Labs — Compensation allocations and statutory tax deduction schedules, evaluating net salary ratios, cross-lead tax burdens, and budget scaling.

  • Set 5 (Questions 17 to 20): Apex Orbitals AeroSat-X Spacecraft — Sub-component material occurrence within categorical wholes, conditional fraction deductions, and logical scope determinations.

Practice questions

Question 1 · Foundation

Directions for questions 1 to 4: Answer the questions on the basis of the information given below.

In 2026, an enterprise AI cloud consortium operated across eight regional compute clusters — Alpha (C1C_1), Beta (C2C_2), Gamma (C3C_3), Delta (C4C_4), Epsilon (C5C_5), Zeta (C6C_6), Eta (C7C_7), and Theta (C8C_8). Each of these clusters deployed specialized AI hardware accelerators across five cutting-edge architectures:

  • Architecture A (Tensor Core TPU): 93.6∘93.6^\circ (26%26\%)

  • Architecture B (Quantum Tensor NPU): 54.0∘54.0^\circ (15%15\%)

  • Architecture C (HyperScale GPU): 90.0∘90.0^\circ (25%25\%)

  • Architecture D (Sparse Neural Engine): 50.4∘50.4^\circ (14%14\%)

  • Architecture E (Wafer Scale Engine): 72.0∘72.0^\circ (20%20\%)

The following donut charts depict the network-wide distribution of accelerators by architecture (Chart 1, subtended central angles out of 360∘360^\circ) and by regional compute cluster (Chart 2, percentage of aggregate network capacity).

Global AI Cloud Infrastructure 2026: Accelerator Deployment

Key Distributions Summary:

  • Accelerator Architectures (Chart 1): Total circle =360∘=100%= 360^\circ = 100\%.

    • Arch A: 93.6∘93.6^\circ (26%26\%)

    • Arch B: 54.0∘54.0^\circ (15%15\%)

    • Arch C: 90.0∘90.0^\circ (25%25\%)

    • Arch D: 50.4∘50.4^\circ (14%14\%)

    • Arch E: 72.0∘72.0^\circ (20%20\%)

  • Regional Compute Clusters (Chart 2): Aggregate Network Compute Capacity =100%= 100\%.

    • Alpha (C1C_1): 6%6\%

    • Beta (C2C_2): 8%8\%

    • Gamma (C3C_3): 10%10\%

    • Delta (C4C_4): 11%11\%

    • Epsilon (C5C_5): 13%13\%

    • Zeta (C6C_6): 14%14\%

    • Eta (C7C_7): 17%17\%

    • Theta (C8C_8): 21%21\%

The number of compute clusters that deployed hardware accelerators of only one architecture could not be more than:

  1. A

    7

  2. B

    5

  3. C

    6

  4. D

    8

Show answer and explanation

Answer: (A) 7

Step-by-step Solution:

To maximize the number of single-architecture clusters, each cluster assigned exclusively to an architecture must have its capacity accommodated within that architecture's network-wide capacity.

Let us greedily assign clusters to single architectures:

  1. Architecture A (26%26\% capacity): Can host Cluster Zeta (14%14\%) and Cluster Delta (11%11\%)   ⟹  14%+11%=25%≤26%\implies 14\% + 11\% = 25\% \le 26\%. (2 clusters)

  2. Architecture C (25%25\% capacity): Can host Cluster Epsilon (13%13\%) and Cluster Gamma (10%10\%)   ⟹  13%+10%=23%≤25%\implies 13\% + 10\% = 23\% \le 25\%. (2 clusters)

  3. Architecture E (20%20\% capacity): Can host Cluster Beta (8%8\%) and Cluster Alpha (6%6\%)   ⟹  8%+6%=14%≤20%\implies 8\% + 6\% = 14\% \le 20\%. (2 clusters)

  4. Architecture B (15%15\% capacity): Can host a single smaller cluster (or Architecture D with 14%14\% can host one).

Now, examine the remaining two large clusters: Cluster Eta (17%17\%) and Cluster Theta ($21%).

  • Cluster Theta (21%21\%) is larger than Architecture B (15%15\%), Architecture D (14%14\%), and Architecture E (20%20\%).

  • If Theta (21%21\%) is exclusively assigned to Architecture A (26%26\%), the remaining capacity in A is 26%−21%=5%26\% - 21\% = 5\%. However, the smallest cluster in the network is Alpha (6%6\%), meaning no other cluster can be assigned to Architecture A.

  • If Theta (21%21\%) is exclusively assigned to Architecture C (25%25\%), the remaining capacity is 4%<6%4\% < 6\%, leading to the same impossibility.

Thus, Cluster Theta cannot be purely dedicated to a single architecture alongside all other clusters. Consequently, at most 7 clusters could deploy only one architecture.

Hence, the correct answer is 7.

Question 2 · Foundation

Directions for questions 1 to 4: Answer the questions on the basis of the information given below.

In 2026, an enterprise AI cloud consortium operated across eight regional compute clusters — Alpha (C1C_1), Beta (C2C_2), Gamma (C3C_3), Delta (C4C_4), Epsilon (C5C_5), Zeta (C6C_6), Eta (C7C_7), and Theta (C8C_8). Each of these clusters deployed specialized AI hardware accelerators across five cutting-edge architectures:

  • Architecture A (Tensor Core TPU): 93.6∘93.6^\circ (26%26\%)

  • Architecture B (Quantum Tensor NPU): 54.0∘54.0^\circ (15%15\%)

  • Architecture C (HyperScale GPU): 90.0∘90.0^\circ (25%25\%)

  • Architecture D (Sparse Neural Engine): 50.4∘50.4^\circ (14%14\%)

  • Architecture E (Wafer Scale Engine): 72.0∘72.0^\circ (20%20\%)

The following donut charts depict the network-wide distribution of accelerators by architecture (Chart 1, subtended central angles out of 360∘360^\circ) and by regional compute cluster (Chart 2, percentage of aggregate network capacity).

Global AI Cloud Infrastructure 2026: Accelerator Deployment

Key Distributions Summary:

  • Accelerator Architectures (Chart 1): Total circle =360∘=100%= 360^\circ = 100\%.

    • Arch A: 93.6∘93.6^\circ (26%26\%)

    • Arch B: 54.0∘54.0^\circ (15%15\%)

    • Arch C: 90.0∘90.0^\circ (25%25\%)

    • Arch D: 50.4∘50.4^\circ (14%14\%)

    • Arch E: 72.0∘72.0^\circ (20%20\%)

  • Regional Compute Clusters (Chart 2): Aggregate Network Compute Capacity =100%= 100\%.

    • Alpha (C1C_1): 6%6\%

    • Beta (C2C_2): 8%8\%

    • Gamma (C3C_3): 10%10\%

    • Delta (C4C_4): 11%11\%

    • Epsilon (C5C_5): 13%13\%

    • Zeta (C6C_6): 14%14\%

    • Eta (C7C_7): 17%17\%

    • Theta (C8C_8): 21%21\%

If Cluster Theta (C8C_8) did not deploy any accelerators of Architecture A, and Architecture A did not constitute more than 35% of the total capacity of any single cluster, the capacity share of Architecture A in any of the clusters as a percentage of that cluster's total capacity could not be less than:

  1. A

    5.0%

  2. B

    6.25%

  3. C

    8.5%

  4. D

    7.5%

Show answer and explanation

Answer: (D) 7.5%

Step-by-step Solution:

Let xx be the capacity share of the target cluster CC as a percentage of the total infrastructure capacity (x∈{6,8,10,11,13,14,17}x \in \{6, 8, 10, 11, 13, 14, 17\}). We want to minimize:

Share of A in C=Capacity of A in Cx×100%\text{Share of A in } C = \frac{\text{Capacity of A in } C}{x} \times 100\%

To minimize the amount of Architecture A in cluster CC, the allocation of Architecture A to all other clusters must be pushed to the maximum allowable limit.

We are given:

  1. Cluster Theta (21%21\% of total capacity) deploys 0%0\% of Architecture A.

  2. Architecture A constitutes at most 35%35\% (0.350.35) of the capacity of any other cluster.

The combined capacity of all other clusters excluding Theta (21%21\%) and the target cluster CC (x%x\%) is:

Combined Capacity of Other Clusters=100%−21%−x%=(79−x)%\text{Combined Capacity of Other Clusters} = 100\% - 21\% - x\% = (79 - x)\%

The maximum amount of Architecture A absorbed by these remaining clusters is:

0.35×(79−x)%=27.65%−0.35x%0.35 \times (79 - x)\% = 27.65\% - 0.35x\%

Since the total capacity of Architecture A across the network is 26%26\%, the minimum capacity of Architecture A that must be deployed in cluster CC is:

Min Capacity of A in C=26%−(27.65%−0.35x%)=0.35x−1.65%\text{Min Capacity of A in } C = 26\% - (27.65\% - 0.35x\%) = 0.35x - 1.65\%

Expressing this as a percentage of cluster CC's capacity xx:

Share of A in C=(0.35x−1.65x)×100%=(0.35−1.65x)×100%\text{Share of A in } C = \left(\frac{0.35x - 1.65}{x}\right) \times 100\% = \left(0.35 - \frac{1.65}{x}\right) \times 100\%

Because 1.65/x1.65/x decreases as xx increases, this percentage is minimized when xx is at its minimum possible value. Among the remaining eligible clusters, the smallest is Cluster Alpha with x=6%x = 6\%:

Min Share=(0.35−1.656)×100%=(0.35−0.275)×100%=0.075×100%=7.5%\text{Min Share} = \left(0.35 - \frac{1.65}{6}\right) \times 100\% = (0.35 - 0.275) \times 100\% = 0.075 \times 100\% = 7.5\%

Hence, the capacity share of Architecture A in any cluster could not be less than 7.5%.

Question 3 · Foundation

Directions for questions 1 to 4: Answer the questions on the basis of the information given below.

In 2026, an enterprise AI cloud consortium operated across eight regional compute clusters — Alpha (C1C_1), Beta (C2C_2), Gamma (C3C_3), Delta (C4C_4), Epsilon (C5C_5), Zeta (C6C_6), Eta (C7C_7), and Theta (C8C_8). Each of these clusters deployed specialized AI hardware accelerators across five cutting-edge architectures:

  • Architecture A (Tensor Core TPU): 93.6∘93.6^\circ (26%26\%)

  • Architecture B (Quantum Tensor NPU): 54.0∘54.0^\circ (15%15\%)

  • Architecture C (HyperScale GPU): 90.0∘90.0^\circ (25%25\%)

  • Architecture D (Sparse Neural Engine): 50.4∘50.4^\circ (14%14\%)

  • Architecture E (Wafer Scale Engine): 72.0∘72.0^\circ (20%20\%)

The following donut charts depict the network-wide distribution of accelerators by architecture (Chart 1, subtended central angles out of 360∘360^\circ) and by regional compute cluster (Chart 2, percentage of aggregate network capacity).

Global AI Cloud Infrastructure 2026: Accelerator Deployment

Key Distributions Summary:

  • Accelerator Architectures (Chart 1): Total circle =360∘=100%= 360^\circ = 100\%.

    • Arch A: 93.6∘93.6^\circ (26%26\%)

    • Arch B: 54.0∘54.0^\circ (15%15\%)

    • Arch C: 90.0∘90.0^\circ (25%25\%)

    • Arch D: 50.4∘50.4^\circ (14%14\%)

    • Arch E: 72.0∘72.0^\circ (20%20\%)

  • Regional Compute Clusters (Chart 2): Aggregate Network Compute Capacity =100%= 100\%.

    • Alpha (C1C_1): 6%6\%

    • Beta (C2C_2): 8%8\%

    • Gamma (C3C_3): 10%10\%

    • Delta (C4C_4): 11%11\%

    • Epsilon (C5C_5): 13%13\%

    • Zeta (C6C_6): 14%14\%

    • Eta (C7C_7): 17%17\%

    • Theta (C8C_8): 21%21\%

Due to a firmware defect, Architecture C had to decommission 20% of its accelerators deployed across the network in 2026. It is also known that every cluster had deployed at least 8% of these defective accelerators. If the capacity of each cluster was adjusted after this decommission, then, after adjustment, the capacity share of any single cluster as a percentage of total network capacity could not be less than:

  1. A

    3.2%

  2. B

    4.8%

  3. C

    4.0%

  4. D

    2.9%

Show answer and explanation

Answer: (C) 4.0%

Step-by-step Solution:

Let the initial network capacity be 100 units.

  • Architecture C initially accounts for 25%25\% of the network, which equals 25 units.

  • Total defective accelerators decommissioned from Architecture C:

Total Decommissioned=20%×25=5.0 units\text{Total Decommissioned} = 20\% \times 25 = 5.0 \text{ units}

  • The adjusted total network capacity after decommission:

Adjusted Total Network Capacity=100−5.0=95.0 units\text{Adjusted Total Network Capacity} = 100 - 5.0 = 95.0 \text{ units}

Every cluster deployed at least 8%8\% of these defective units:

Minimum decommission per cluster=8%×5.0=0.40 units\text{Minimum decommission per cluster} = 8\% \times 5.0 = 0.40 \text{ units}

To minimize the adjusted capacity share of any single cluster:

  1. Choose the cluster with the smallest initial capacity, which is Cluster Alpha (6%6\% = 6.0 units).

  2. Maximize the decommission from Cluster Alpha by setting the decommission of the other 7 clusters to their minimum allowable level (0.400.40 units each):

Decommission from other 7 clusters=7×0.40=2.80 units\text{Decommission from other 7 clusters} = 7 \times 0.40 = 2.80 \text{ units}

Maximum Decommission from Cluster Alpha=5.0−2.80=2.20 units\text{Maximum Decommission from Cluster Alpha} = 5.0 - 2.80 = 2.20 \text{ units}

Adjusted capacity of Cluster Alpha:

Adjusted Capacity of Alpha=6.0−2.20=3.80 units\text{Adjusted Capacity of Alpha} = 6.0 - 2.20 = 3.80 \text{ units}

As a percentage of the adjusted total network capacity (95.095.0 units):

Adjusted Share of Alpha=3.8095.0×100%=38950×100%=250×100%=4.0%\text{Adjusted Share of Alpha} = \frac{3.80}{95.0} \times 100\% = \frac{38}{950} \times 100\% = \frac{2}{50} \times 100\% = 4.0\%

Hence, after adjustment, the share of any cluster could not be less than 4.0%.

Question 4 · Foundation

Directions for questions 1 to 4: Answer the questions on the basis of the information given below.

In 2026, an enterprise AI cloud consortium operated across eight regional compute clusters — Alpha (C1C_1), Beta (C2C_2), Gamma (C3C_3), Delta (C4C_4), Epsilon (C5C_5), Zeta (C6C_6), Eta (C7C_7), and Theta (C8C_8). Each of these clusters deployed specialized AI hardware accelerators across five cutting-edge architectures:

  • Architecture A (Tensor Core TPU): 93.6∘93.6^\circ (26%26\%)

  • Architecture B (Quantum Tensor NPU): 54.0∘54.0^\circ (15%15\%)

  • Architecture C (HyperScale GPU): 90.0∘90.0^\circ (25%25\%)

  • Architecture D (Sparse Neural Engine): 50.4∘50.4^\circ (14%14\%)

  • Architecture E (Wafer Scale Engine): 72.0∘72.0^\circ (20%20\%)

The following donut charts depict the network-wide distribution of accelerators by architecture (Chart 1, subtended central angles out of 360∘360^\circ) and by regional compute cluster (Chart 2, percentage of aggregate network capacity).

Global AI Cloud Infrastructure 2026: Accelerator Deployment

Key Distributions Summary:

  • Accelerator Architectures (Chart 1): Total circle =360∘=100%= 360^\circ = 100\%.

    • Arch A: 93.6∘93.6^\circ (26%26\%)

    • Arch B: 54.0∘54.0^\circ (15%15\%)

    • Arch C: 90.0∘90.0^\circ (25%25\%)

    • Arch D: 50.4∘50.4^\circ (14%14\%)

    • Arch E: 72.0∘72.0^\circ (20%20\%)

  • Regional Compute Clusters (Chart 2): Aggregate Network Compute Capacity =100%= 100\%.

    • Alpha (C1C_1): 6%6\%

    • Beta (C2C_2): 8%8\%

    • Gamma (C3C_3): 10%10\%

    • Delta (C4C_4): 11%11\%

    • Epsilon (C5C_5): 13%13\%

    • Zeta (C6C_6): 14%14\%

    • Eta (C7C_7): 17%17\%

    • Theta (C8C_8): 21%21\%

If Cluster Theta (C8C_8) deployed at least 30% of the total accelerators deployed of architectures A and C put together, then at most what percentage of the total accelerators of architecture B was deployed by Cluster Theta?

  1. A

    38.0%

  2. B

    32.5%

  3. C

    42.0%

  4. D

    35.0%

Show answer and explanation

Answer: (A) 38.0%

Step-by-step Solution:

Let the total network capacity be 100 units.

  • Architecture A =26= 26 units (26%26\%)

  • Architecture C =25= 25 units (25%25\%)

  • Architecture B =15= 15 units (15%15\%)

  • Cluster Theta =21= 21 units (21%21\%)

Combined total capacity of Architectures A and C across the network:

Total (A+C)=26+25=51 units\text{Total }(A + C) = 26 + 25 = 51 \text{ units}

Cluster Theta deployed at least 30%30\% of this combined total:

Deployment of (A+C) in Theta≥30%×51=15.3 units\text{Deployment of }(A + C) \text{ in Theta} \ge 30\% \times 51 = 15.3 \text{ units}

Since Cluster Theta's total capacity is 21 units, the capacity remaining in Theta for all other architectures (B, D, E) is at most:

Remaining Capacity in Theta≤21−15.3=5.7 units\text{Remaining Capacity in Theta} \le 21 - 15.3 = 5.7 \text{ units}

To maximize the percentage of Architecture B deployed by Theta, we assume this entire remaining headroom is dedicated exclusively to Architecture B (with zero units of D and E deployed in Theta):

Max Accelerators of B in Theta=5.7 units\text{Max Accelerators of B in Theta} = 5.7 \text{ units}

Total accelerators of Architecture B across the entire network =15= 15 units.

Maximum Percentage of B in Theta=5.715×100%=57150×100%=1950×100%=38.0%\text{Maximum Percentage of B in Theta} = \frac{5.7}{15} \times 100\% = \frac{57}{150} \times 100\% = \frac{19}{50} \times 100\% = 38.0\%

Hence, at most 38.0% of the total accelerators of Architecture B was deployed by Cluster Theta.

Question 5 · Foundation

Directions for questions 5 to 8: Answer the questions on the basis of the information given below.

NexLogix Inc. is an autonomous logistics and supply chain enterprise that fulfills shipments across three primary modes of transportation: Air Cargo, Electric Rail, and Autonomous Road Fleet.

The following donut charts illustrate the distribution of total shipment volume (Chart 1), gross revenue generated (Chart 2), and total operating cost incurred (Chart 3) across the three modes of transportation for the fiscal year 2026. Assume that transportation operations were the sole source of cost and revenue for the company.

NexLogix Multimodal Freight Logistics: Operational Metrics 2026

Summary of Central Angle Distributions (360∘360^\circ Base per Chart):

  • Chart 1 (Shipment Volume):

    • Autonomous Road Fleet: 180∘180^\circ (50.0%50.0\%)

    • Electric Rail: 108∘108^\circ (30.0%30.0\%)

    • Air Cargo: 72∘72^\circ (20.0%20.0\%)

  • Chart 2 (Revenue Generated):

    • Air Cargo: 162∘162^\circ (45.0%45.0\%)

    • Electric Rail: 126∘126^\circ (35.0%35.0\%)

    • Autonomous Road Fleet: 72∘72^\circ (20.0%20.0\%)

  • Chart 3 (Total Operating Cost):

    • Air Cargo: 180∘180^\circ (50.0%50.0\%)

    • Electric Rail: 108∘108^\circ (30.0%30.0\%)

    • Autonomous Road Fleet: 72∘72^\circ (20.0%20.0\%)

In 2026, if the company made an overall profit of 25%, what was the profit percentage on the shipments handled via Air Cargo transport?

  1. A

    12.5%

  2. B

    10.0%

  3. C

    15.0%

  4. D

    8.33%

Show answer and explanation

Answer: (A) 12.5%

Step-by-step Solution:

Let the total gross revenue be RR and the total operating cost be CC.

Given that the company achieved an overall profit of 25%25\%:

Overall Profit=R−CC=0.25  ⟹  R=1.25C\text{Overall Profit} = \frac{R - C}{C} = 0.25 \implies R = 1.25 C

From Chart 2, Air Cargo accounts for 162∘162^\circ out of 360∘360^\circ of total revenue:

Revenue from Air Cargo=162360R=0.45R=0.45×(1.25C)=0.5625C\text{Revenue from Air Cargo} = \frac{162}{360} R = 0.45 R = 0.45 \times (1.25 C) = 0.5625 C

From Chart 3, Air Cargo accounts for 180∘180^\circ out of 360∘360^\circ of total operating cost:

Cost of Air Cargo=180360C=0.50C\text{Cost of Air Cargo} = \frac{180}{360} C = 0.50 C

Profit generated on Air Cargo shipments:

ProfitAir=RevenueAir−CostAir=0.5625C−0.50C=0.0625C\text{Profit}_{\text{Air}} = \text{Revenue}_{\text{Air}} - \text{Cost}_{\text{Air}} = 0.5625 C - 0.50 C = 0.0625 C

Profit percentage on Air Cargo:

Profit PercentageAir=ProfitAirCostAir×100%=0.0625C0.50C×100%=12.5%\text{Profit Percentage}_{\text{Air}} = \frac{\text{Profit}_{\text{Air}}}{\text{Cost}_{\text{Air}}} \times 100\% = \frac{0.0625 C}{0.50 C} \times 100\% = 12.5\%

Hence, the profit percentage on Air Cargo shipments was 12.5%.

Question 6 · Foundation

Directions for questions 5 to 8: Answer the questions on the basis of the information given below.

NexLogix Inc. is an autonomous logistics and supply chain enterprise that fulfills shipments across three primary modes of transportation: Air Cargo, Electric Rail, and Autonomous Road Fleet.

The following donut charts illustrate the distribution of total shipment volume (Chart 1), gross revenue generated (Chart 2), and total operating cost incurred (Chart 3) across the three modes of transportation for the fiscal year 2026. Assume that transportation operations were the sole source of cost and revenue for the company.

NexLogix Multimodal Freight Logistics: Operational Metrics 2026

Summary of Central Angle Distributions (360∘360^\circ Base per Chart):

  • Chart 1 (Shipment Volume):

    • Autonomous Road Fleet: 180∘180^\circ (50.0%50.0\%)

    • Electric Rail: 108∘108^\circ (30.0%30.0\%)

    • Air Cargo: 72∘72^\circ (20.0%20.0\%)

  • Chart 2 (Revenue Generated):

    • Air Cargo: 162∘162^\circ (45.0%45.0\%)

    • Electric Rail: 126∘126^\circ (35.0%35.0\%)

    • Autonomous Road Fleet: 72∘72^\circ (20.0%20.0\%)

  • Chart 3 (Total Operating Cost):

    • Air Cargo: 180∘180^\circ (50.0%50.0\%)

    • Electric Rail: 108∘108^\circ (30.0%30.0\%)

    • Autonomous Road Fleet: 72∘72^\circ (20.0%20.0\%)

Through which mode of transportation did the company generate the maximum absolute profit in 2026?

  1. A

    Electric Rail

  2. B

    Autonomous Road Fleet

  3. C

    Air Cargo

  4. D

    Cannot be determined

Show answer and explanation

Answer: (D) Cannot be determined

Step-by-step Solution:

Let total revenue be RR and total operating cost be CC.

Using the central angles from Chart 2 (Revenue) and Chart 3 (Cost), the profit function for each mode is:

  • Autonomous Road Fleet:

    ProfitRoad=72360R−72360C=0.20R−0.20C=0.20(R−C)\text{Profit}_{\text{Road}} = \frac{72}{360} R - \frac{72}{360} C = 0.20 R - 0.20 C = 0.20(R - C)

  • Electric Rail:

    ProfitRail=126360R−108360C=0.35R−0.30C\text{Profit}_{\text{Rail}} = \frac{126}{360} R - \frac{108}{360} C = 0.35 R - 0.30 C

  • Air Cargo:

    ProfitAir=162360R−180360C=0.45R−0.50C\text{Profit}_{\text{Air}} = \frac{162}{360} R - \frac{180}{360} C = 0.45 R - 0.50 C

Notice that the ranking of profits depends entirely on the value of the revenue-to-cost ratio k=R/Ck = R/C:

  1. If R=CR = C (k=1k = 1):

    • ProfitRoad=0\text{Profit}_{\text{Road}} = 0

    • ProfitRail=+0.05C\text{Profit}_{\text{Rail}} = +0.05 C (Maximum)

    • ProfitAir=−0.05C\text{Profit}_{\text{Air}} = -0.05 C

  2. If R=2CR = 2C (k=2k = 2):

    • ProfitRoad=0.20C\text{Profit}_{\text{Road}} = 0.20 C

    • ProfitRail=0.40C\text{Profit}_{\text{Rail}} = 0.40 C

    • ProfitAir=0.40C\text{Profit}_{\text{Air}} = 0.40 C (Rail and Air tie for maximum)

  3. If R=3CR = 3C (k=3k = 3):

    • ProfitRoad=0.40C\text{Profit}_{\text{Road}} = 0.40 C

    • ProfitRail=0.75C\text{Profit}_{\text{Rail}} = 0.75 C

    • ProfitAir=0.85C\text{Profit}_{\text{Air}} = 0.85 C (Air is strictly Maximum)

Because the absolute base values of RR and CC (or their ratio) are not given, the mode that generated the maximum profit cannot be determined.

Hence, the correct answer is Cannot be determined.

Question 7 · Moderate

Directions for questions 5 to 8: Answer the questions on the basis of the information given below.

NexLogix Inc. is an autonomous logistics and supply chain enterprise that fulfills shipments across three primary modes of transportation: Air Cargo, Electric Rail, and Autonomous Road Fleet.

The following donut charts illustrate the distribution of total shipment volume (Chart 1), gross revenue generated (Chart 2), and total operating cost incurred (Chart 3) across the three modes of transportation for the fiscal year 2026. Assume that transportation operations were the sole source of cost and revenue for the company.

NexLogix Multimodal Freight Logistics: Operational Metrics 2026

Summary of Central Angle Distributions (360∘360^\circ Base per Chart):

  • Chart 1 (Shipment Volume):

    • Autonomous Road Fleet: 180∘180^\circ (50.0%50.0\%)

    • Electric Rail: 108∘108^\circ (30.0%30.0\%)

    • Air Cargo: 72∘72^\circ (20.0%20.0\%)

  • Chart 2 (Revenue Generated):

    • Air Cargo: 162∘162^\circ (45.0%45.0\%)

    • Electric Rail: 126∘126^\circ (35.0%35.0\%)

    • Autonomous Road Fleet: 72∘72^\circ (20.0%20.0\%)

  • Chart 3 (Total Operating Cost):

    • Air Cargo: 180∘180^\circ (50.0%50.0\%)

    • Electric Rail: 108∘108^\circ (30.0%30.0\%)

    • Autonomous Road Fleet: 72∘72^\circ (20.0%20.0\%)

Which mode of transportation had the least operating cost per shipment in the year 2026 for the company?

  1. A

    Electric Rail

  2. B

    Autonomous Road Fleet

  3. C

    Air Cargo

  4. D

    Cannot be determined

Show answer and explanation

Answer: (B) Autonomous Road Fleet

Step-by-step Solution:

Let the total number of shipments be NN and the total operating cost be CC.

Operating cost per shipment for mode ii is:

Cost per shipmenti=Operating Cost of mode iShipment Volume of mode i=(θcost,i/360)×C(θvol,i/360)×N=(θcost,iθvol,i)×CN\text{Cost per shipment}_i = \frac{\text{Operating Cost of mode } i}{\text{Shipment Volume of mode } i} = \frac{(\theta_{\text{cost}, i} / 360) \times C}{(\theta_{\text{vol}, i} / 360) \times N} = \left(\frac{\theta_{\text{cost}, i}}{\theta_{\text{vol}, i}}\right) \times \frac{C}{N}

Because the ratio C/NC/N is identical across all three modes, comparing unit costs is equivalent to comparing the ratio of central angles θcostθvol\frac{\theta_{\text{cost}}}{\theta_{\text{vol}}}:

  • Autonomous Road Fleet:

    θcostθvol=72∘180∘=0.40\frac{\theta_{\text{cost}}}{\theta_{\text{vol}}} = \frac{72^\circ}{180^\circ} = 0.40

  • Electric Rail:

    θcostθvol=108∘108∘=1.00\frac{\theta_{\text{cost}}}{\theta_{\text{vol}}} = \frac{108^\circ}{108^\circ} = 1.00

  • Air Cargo:

    θcostθvol=180∘72∘=2.50\frac{\theta_{\text{cost}}}{\theta_{\text{vol}}} = \frac{180^\circ}{72^\circ} = 2.50

Comparing the three ratios:

0.40<1.00<2.500.40 < 1.00 < 2.50

Autonomous Road Fleet has the strictly lowest operating cost per shipment (0.40×C/N0.40 \times C/N).

Hence, the correct answer is Autonomous Road Fleet.

Question 8 · Moderate

Directions for questions 5 to 8: Answer the questions on the basis of the information given below.

NexLogix Inc. is an autonomous logistics and supply chain enterprise that fulfills shipments across three primary modes of transportation: Air Cargo, Electric Rail, and Autonomous Road Fleet.

The following donut charts illustrate the distribution of total shipment volume (Chart 1), gross revenue generated (Chart 2), and total operating cost incurred (Chart 3) across the three modes of transportation for the fiscal year 2026. Assume that transportation operations were the sole source of cost and revenue for the company.

NexLogix Multimodal Freight Logistics: Operational Metrics 2026

Summary of Central Angle Distributions (360∘360^\circ Base per Chart):

  • Chart 1 (Shipment Volume):

    • Autonomous Road Fleet: 180∘180^\circ (50.0%50.0\%)

    • Electric Rail: 108∘108^\circ (30.0%30.0\%)

    • Air Cargo: 72∘72^\circ (20.0%20.0\%)

  • Chart 2 (Revenue Generated):

    • Air Cargo: 162∘162^\circ (45.0%45.0\%)

    • Electric Rail: 126∘126^\circ (35.0%35.0\%)

    • Autonomous Road Fleet: 72∘72^\circ (20.0%20.0\%)

  • Chart 3 (Total Operating Cost):

    • Air Cargo: 180∘180^\circ (50.0%50.0\%)

    • Electric Rail: 108∘108^\circ (30.0%30.0\%)

    • Autonomous Road Fleet: 72∘72^\circ (20.0%20.0\%)

In 2026, if the company operated at overall breakeven (made neither profit nor loss), then for how many modes of transportation did the company incur a financial loss?

  1. A

    0

  2. B

    1

  3. C

    2

  4. D

    3

Show answer and explanation

Answer: (B) 1

Step-by-step Solution:

At overall breakeven, total revenue equals total operating cost:

R=CR = C

Evaluating the profit/loss generated by each mode under R=CR = C:

  • Autonomous Road Fleet:

    ProfitRoad=0.20R−0.20C=0.20C−0.20C=0(Breakeven)\text{Profit}_{\text{Road}} = 0.20 R - 0.20 C = 0.20 C - 0.20 C = 0 \quad (\text{Breakeven})

  • Electric Rail:

    ProfitRail=0.35R−0.30C=0.35C−0.30C=+0.05C>0(Profit)\text{Profit}_{\text{Rail}} = 0.35 R - 0.30 C = 0.35 C - 0.30 C = +0.05 C > 0 \quad (\text{Profit})

  • Air Cargo:

    ProfitAir=0.45R−0.50C=0.45C−0.50C=−0.05C<0(Financial Loss)\text{Profit}_{\text{Air}} = 0.45 R - 0.50 C = 0.45 C - 0.50 C = -0.05 C < 0 \quad (\text{Financial Loss})

Only Air Cargo generates a negative profit (loss), while Electric Rail is profitable and Autonomous Road Fleet breaks even.

Hence, the company incurred a loss for exactly 1 mode of transportation.

Question 9 · Moderate

Directions for questions 9 to 12: Answer the questions on the basis of the information given below.

Apex Semiconductor Foundry manufactures six advanced microchip SKUs: Product A (NPU), Product B (HBM-C), Product C (Edge-AI), Product D (RF-SoC), Product E (Q-Optic), and Product F (Host-CPU).

The following charts outline the distribution of silicon wafer fabrication output, total manufacturing expenses, commercial shipment volume, and commercial shipment value across the six products in the fiscal year 2026.

  • The foundry enforces a strict internal quality control audit: any microchip failing specification benchmarks is immediately rejected and recycled.

  • All products commercially shipped in 2026 were manufactured in the same fiscal year itself.

  • Commercial shipment constitutes the sole source of sales revenue for the foundry.

Profit=Sales Revenue−Expenses\text{Profit} = \text{Sales Revenue} - \text{Expenses}

Profitability (%)=ProfitExpenses×100%\text{Profitability (\%)} = \frac{\text{Profit}}{\text{Expenses}} \times 100\%

Apex Semiconductor Foundry: Fiscal Year 2026 Microchip Metrics

Percentage Distribution Summary across the 6 SKUs:

  • 1. Wafer Fabrication Output (Volume %): A: 10%10\%, B: 22%22\%, C: 18%18\%, D: 24%24\%, E: 14%14\%, F: 12%12\%

  • 2. Manufacturing Expenses Share (%): A: 16%16\%, B: 18%18\%, C: 15%15\%, D: 18%18\%, E: 13%13\%, F: 20%20\%

  • 3. Commercial Shipped Volume Share (%): A: 12%12\%, B: 18%18\%, C: 15%15\%, D: 28%28\%, E: 11%11\%, F: 16%16\%

  • 4. Commercial Shipment Value Share (%): A: 15%15\%, B: 14%14\%, C: 21%21\%, D: 18%18\%, E: 17%17\%, F: 15%15\%

In 2026, the microchips commercially shipped as a percentage of the total microchips manufactured by the foundry could not be more than:

  1. A

    80.0%

  2. B

    83.33%

  3. C

    75.0%

  4. D

    71.43%

Show answer and explanation

Answer: (C) 75.0%

Step-by-step Solution:

Let total microchips manufactured be PtotalP_{\text{total}} and total microchips commercially shipped be VtotalV_{\text{total}}.

Because all shipped units were manufactured in 2026, for any individual SKU ii, the number of shipped units cannot exceed the number of manufactured units:

Shippedi≤Manufacturedi  ⟹  Vi⋅Vtotal≤Pi⋅Ptotal\text{Shipped}_i \le \text{Manufactured}_i \implies V_i \cdot V_{\text{total}} \le P_i \cdot P_{\text{total}}

VtotalPtotal≤PiVifor all i∈{A,B,C,D,E,F}\frac{V_{\text{total}}}{P_{\text{total}}} \le \frac{P_i}{V_i} \quad \text{for all } i \in \{A, B, C, D, E, F\}

Therefore, the overall shipment percentage VtotalPtotal\frac{V_{\text{total}}}{P_{\text{total}}} is constrained by the minimum value of PiVi\frac{P_i}{V_i} across all six products:

  • Product A: PAVA=1012≈0.8333\frac{P_A}{V_A} = \frac{10}{12} \approx 0.8333

  • Product B: PBVB=2218≈1.2222\frac{P_B}{V_B} = \frac{22}{18} \approx 1.2222

  • Product C: PCVC=1815=1.2000\frac{P_C}{V_C} = \frac{18}{15} = 1.2000

  • Product D: PDVD=2428≈0.8571\frac{P_D}{V_D} = \frac{24}{28} \approx 0.8571

  • Product E: PEVE=1411≈1.2727\frac{P_E}{V_E} = \frac{14}{11} \approx 1.2727

  • Product F: PFVF=1216=0.7500\frac{P_F}{V_F} = \frac{12}{16} = 0.7500

The tightest constraint is imposed by Product F:

min⁡i(PiVi)=1216=0.7500=75.0%\min_i \left(\frac{P_i}{V_i}\right) = \frac{12}{16} = 0.7500 = 75.0\%

Thus, the volume of microchips exported cannot exceed 75.0% of the total microchips manufactured.

Hence, the correct answer is 75.0%.

Question 10 · Moderate

Directions for questions 9 to 12: Answer the questions on the basis of the information given below.

Apex Semiconductor Foundry manufactures six advanced microchip SKUs: Product A (NPU), Product B (HBM-C), Product C (Edge-AI), Product D (RF-SoC), Product E (Q-Optic), and Product F (Host-CPU).

The following charts outline the distribution of silicon wafer fabrication output, total manufacturing expenses, commercial shipment volume, and commercial shipment value across the six products in the fiscal year 2026.

  • The foundry enforces a strict internal quality control audit: any microchip failing specification benchmarks is immediately rejected and recycled.

  • All products commercially shipped in 2026 were manufactured in the same fiscal year itself.

  • Commercial shipment constitutes the sole source of sales revenue for the foundry.

Profit=Sales Revenue−Expenses\text{Profit} = \text{Sales Revenue} - \text{Expenses}

Profitability (%)=ProfitExpenses×100%\text{Profitability (\%)} = \frac{\text{Profit}}{\text{Expenses}} \times 100\%

Apex Semiconductor Foundry: Fiscal Year 2026 Microchip Metrics

Percentage Distribution Summary across the 6 SKUs:

  • 1. Wafer Fabrication Output (Volume %): A: 10%10\%, B: 22%22\%, C: 18%18\%, D: 24%24\%, E: 14%14\%, F: 12%12\%

  • 2. Manufacturing Expenses Share (%): A: 16%16\%, B: 18%18\%, C: 15%15\%, D: 18%18\%, E: 13%13\%, F: 20%20\%

  • 3. Commercial Shipped Volume Share (%): A: 12%12\%, B: 18%18\%, C: 15%15\%, D: 28%28\%, E: 11%11\%, F: 16%16\%

  • 4. Commercial Shipment Value Share (%): A: 15%15\%, B: 14%14\%, C: 21%21\%, D: 18%18\%, E: 17%17\%, F: 15%15\%

In 2026, if Product D was a profit making product for the foundry, what was the maximum number of products that could be loss making products for the foundry?

  1. A

    2

  2. B

    3

  3. C

    4

  4. D

    1

Show answer and explanation

Answer: (B) 3

Step-by-step Solution:

Let total manufacturing expenses be EtotalE_{\text{total}} and total shipment sales revenue be StotalS_{\text{total}}.

For any product ii:

Profiti=Si⋅Stotal−Ei⋅Etotal\text{Profit}_i = S_i \cdot S_{\text{total}} - E_i \cdot E_{\text{total}}

  • Product ii makes a profit if:

    StotalEtotal>EiSi\frac{S_{\text{total}}}{E_{\text{total}}} > \frac{E_i}{S_i}

  • Product ii incurs a loss if:

    StotalEtotal<EiSi\frac{S_{\text{total}}}{E_{\text{total}}} < \frac{E_i}{S_i}

We are given that Product D is profit making:

StotalEtotal>EDSD=18%18%=1.000\frac{S_{\text{total}}}{E_{\text{total}}} > \frac{E_D}{S_D} = \frac{18\%}{18\%} = 1.000

To maximize the number of loss-making products, we let the global ratio StotalEtotal\frac{S_{\text{total}}}{E_{\text{total}}} be just slightly above 1.0001.000 (e.g., 1.000+ϵ1.000 + \epsilon). Under this condition, any product whose ratio EiSi\frac{E_i}{S_i} is strictly greater than 1.0001.000 will be a loss-making product.

Computing EiSi\frac{E_i}{S_i} for each SKU:

  • SKU A: EASA=1615≈1.067>1.000  ⟹  Can be loss-making\frac{E_A}{S_A} = \frac{16}{15} \approx 1.067 > 1.000 \implies \text{Can be loss-making}

  • SKU B: EBSB=1814≈1.286>1.000  ⟹  Can be loss-making\frac{E_B}{S_B} = \frac{18}{14} \approx 1.286 > 1.000 \implies \text{Can be loss-making}

  • SKU C: ECSC=1521≈0.714<1.000\frac{E_C}{S_C} = \frac{15}{21} \approx 0.714 < 1.000

  • SKU D: EDSD=1818=1.000  ⟹  Profit-making\frac{E_D}{S_D} = \frac{18}{18} = 1.000 \implies \text{Profit-making}

  • SKU E: EESE=1317≈0.765<1.000\frac{E_E}{S_E} = \frac{13}{17} \approx 0.765 < 1.000

  • SKU F: EFSF=2015≈1.333>1.000  ⟹  Can be loss-making\frac{E_F}{S_F} = \frac{20}{15} \approx 1.333 > 1.000 \implies \text{Can be loss-making}

Exactly 3 products (SKUs A, B, and F) have EiSi>1.000\frac{E_i}{S_i} > 1.000.

Hence, the maximum number of loss-making products is 3.

Question 11 · Moderate

Directions for questions 9 to 12: Answer the questions on the basis of the information given below.

Apex Semiconductor Foundry manufactures six advanced microchip SKUs: Product A (NPU), Product B (HBM-C), Product C (Edge-AI), Product D (RF-SoC), Product E (Q-Optic), and Product F (Host-CPU).

The following charts outline the distribution of silicon wafer fabrication output, total manufacturing expenses, commercial shipment volume, and commercial shipment value across the six products in the fiscal year 2026.

  • The foundry enforces a strict internal quality control audit: any microchip failing specification benchmarks is immediately rejected and recycled.

  • All products commercially shipped in 2026 were manufactured in the same fiscal year itself.

  • Commercial shipment constitutes the sole source of sales revenue for the foundry.

Profit=Sales Revenue−Expenses\text{Profit} = \text{Sales Revenue} - \text{Expenses}

Profitability (%)=ProfitExpenses×100%\text{Profitability (\%)} = \frac{\text{Profit}}{\text{Expenses}} \times 100\%

Apex Semiconductor Foundry: Fiscal Year 2026 Microchip Metrics

Percentage Distribution Summary across the 6 SKUs:

  • 1. Wafer Fabrication Output (Volume %): A: 10%10\%, B: 22%22\%, C: 18%18\%, D: 24%24\%, E: 14%14\%, F: 12%12\%

  • 2. Manufacturing Expenses Share (%): A: 16%16\%, B: 18%18\%, C: 15%15\%, D: 18%18\%, E: 13%13\%, F: 20%20\%

  • 3. Commercial Shipped Volume Share (%): A: 12%12\%, B: 18%18\%, C: 15%15\%, D: 28%28\%, E: 11%11\%, F: 16%16\%

  • 4. Commercial Shipment Value Share (%): A: 15%15\%, B: 14%14\%, C: 21%21\%, D: 18%18\%, E: 17%17\%, F: 15%15\%

The commercial shipment price per unit of which microchip SKU was the highest?

  1. A

    Product A

  2. B

    Product C

  3. C

    Product F

  4. D

    Product E

Show answer and explanation

Answer: (D) Product E

Step-by-step Solution:

The shipment price per unit for product ii is:

Pricei=Commercial ValueiShipped Volumei=Si⋅StotalVi⋅Vtotal=(SiVi)×(StotalVtotal)\text{Price}_i = \frac{\text{Commercial Value}_i}{\text{Shipped Volume}_i} = \frac{S_i \cdot S_{\text{total}}}{V_i \cdot V_{\text{total}}} = \left(\frac{S_i}{V_i}\right) \times \left(\frac{S_{\text{total}}}{V_{\text{total}}}\right)

Because the factor StotalVtotal\frac{S_{\text{total}}}{V_{\text{total}}} is common to all SKUs, the product with the highest price per unit is the one with the maximum value-to-volume ratio SiVi\frac{S_i}{V_i}:

  • Product A: SAVA=1512=1.250\frac{S_A}{V_A} = \frac{15}{12} = 1.250

  • Product B: SBVB=1418≈0.778\frac{S_B}{V_B} = \frac{14}{18} \approx 0.778

  • Product C: SCVC=2115=1.400\frac{S_C}{V_C} = \frac{21}{15} = 1.400

  • Product D: SDVD=1828≈0.643\frac{S_D}{V_D} = \frac{18}{28} \approx 0.643

  • Product E: SEVE=1711≈1.545\frac{S_E}{V_E} = \frac{17}{11} \approx 1.545

  • Product F: SFVF=1516≈0.938\frac{S_F}{V_F} = \frac{15}{16} \approx 0.938

Comparing the values:

1.545>1.400>1.250>0.938>0.778>0.6431.545 > 1.400 > 1.250 > 0.938 > 0.778 > 0.643

Product E exhibits the highest ratio (1.5451.545), meaning its commercial shipment price per unit was the highest.

Hence, the correct answer is Product E.

Question 12 · Moderate

Directions for questions 9 to 12: Answer the questions on the basis of the information given below.

Apex Semiconductor Foundry manufactures six advanced microchip SKUs: Product A (NPU), Product B (HBM-C), Product C (Edge-AI), Product D (RF-SoC), Product E (Q-Optic), and Product F (Host-CPU).

The following charts outline the distribution of silicon wafer fabrication output, total manufacturing expenses, commercial shipment volume, and commercial shipment value across the six products in the fiscal year 2026.

  • The foundry enforces a strict internal quality control audit: any microchip failing specification benchmarks is immediately rejected and recycled.

  • All products commercially shipped in 2026 were manufactured in the same fiscal year itself.

  • Commercial shipment constitutes the sole source of sales revenue for the foundry.

Profit=Sales Revenue−Expenses\text{Profit} = \text{Sales Revenue} - \text{Expenses}

Profitability (%)=ProfitExpenses×100%\text{Profitability (\%)} = \frac{\text{Profit}}{\text{Expenses}} \times 100\%

Apex Semiconductor Foundry: Fiscal Year 2026 Microchip Metrics

Percentage Distribution Summary across the 6 SKUs:

  • 1. Wafer Fabrication Output (Volume %): A: 10%10\%, B: 22%22\%, C: 18%18\%, D: 24%24\%, E: 14%14\%, F: 12%12\%

  • 2. Manufacturing Expenses Share (%): A: 16%16\%, B: 18%18\%, C: 15%15\%, D: 18%18\%, E: 13%13\%, F: 20%20\%

  • 3. Commercial Shipped Volume Share (%): A: 12%12\%, B: 18%18\%, C: 15%15\%, D: 28%28\%, E: 11%11\%, F: 16%16\%

  • 4. Commercial Shipment Value Share (%): A: 15%15\%, B: 14%14\%, C: 21%21\%, D: 18%18\%, E: 17%17\%, F: 15%15\%

For which microchip SKU was the internal rejection rate maximum?

  1. A

    Product B

  2. B

    Product C

  3. C

    Product E

  4. D

    Product F

Show answer and explanation

Answer: (C) Product E

Step-by-step Solution:

The internal rejection rate for SKU ii is defined as:

Rejection Ratei=Manufacturedi−ShippediManufacturedi=1−ShippediManufacturedi=1−(VtotalPtotal)×ViPi\text{Rejection Rate}_i = \frac{\text{Manufactured}_i - \text{Shipped}_i}{\text{Manufactured}_i} = 1 - \frac{\text{Shipped}_i}{\text{Manufactured}_i} = 1 - \left(\frac{V_{\text{total}}}{P_{\text{total}}}\right) \times \frac{V_i}{P_i}

Maximizing the rejection rate is strictly equivalent to minimizing the ratio ViPi\frac{V_i}{P_i} (the proportion of manufactured chips that successfully shipped):

  • Product A: VAPA=1210=1.2000\frac{V_A}{P_A} = \frac{12}{10} = 1.2000

  • Product B: VBPB=1822≈0.8182\frac{V_B}{P_B} = \frac{18}{22} \approx 0.8182

  • Product C: VCPC=1518≈0.8333\frac{V_C}{P_C} = \frac{15}{18} \approx 0.8333

  • Product D: VDPD=2824≈1.1667\frac{V_D}{P_D} = \frac{28}{24} \approx 1.1667

  • Product E: VEPE=1114≈0.7857\frac{V_E}{P_E} = \frac{11}{14} \approx 0.7857

  • Product F: VFPF=1612≈1.3333\frac{V_F}{P_F} = \frac{16}{12} \approx 1.3333

Comparing the ratios:

VEPE=0.7857 is strictly the lowest among all six SKUs.\frac{V_E}{P_E} = 0.7857 \text{ is strictly the lowest among all six SKUs.}

Since Product E has the lowest shipment-to-production ratio, it had the highest proportion of manufactured units rejected during quality inspection.

Hence, the correct answer is Product E.

Question 13 · Moderate

Directions for questions 13 to 16: Answer the questions on the basis of the information given below.

Six Principal Research Leads — Lead A (Ananya), Lead B (Bikram), Lead C (Chitra), Lead D (Deepak), Lead E (Esha), and Lead F (Faizan) — lead advanced research teams at Vertex Quantum Labs.

The first donut chart displays the break-up of the company's total gross compensation budget across these six leads. The second donut chart shows the statutory income tax rate withheld as a percentage of the respective lead's individual gross compensation.

Net Compensation=Gross Compensation−Tax Withheld\text{Net Compensation} = \text{Gross Compensation} - \text{Tax Withheld}

Vertex Quantum Labs: Compensation Breakdown & Statutory Tax

Compensation & Tax Rate Schedule:

  • Chart 1 (Gross Compensation Budget Share):

    • Lead A: 15%15\%

    • Lead B: 20%20\%

    • Lead C: 10%10\%

    • Lead D: 15%15\%

    • Lead E: 15%15\%

    • Lead F: 25%25\%

  • Chart 2 (Statutory Tax Withheld as % of Individual Gross Compensation):

    • Lead A: 10%10\%

    • Lead B: 15%15\%

    • Lead C: 10%10\%

    • Lead D: 20%20\%

    • Lead E: 10%10\%

    • Lead F: 20%20\%

What is the ratio of the net compensation received by Lead A, Lead B, Lead C, Lead D, Lead E, and Lead F respectively?

  1. A

    27 : 34 : 18 : 24 : 27 : 40

  2. B

    27 : 34 : 18 : 22 : 27 : 40

  3. C

    25 : 32 : 18 : 24 : 27 : 38

  4. D

    27 : 34 : 16 : 24 : 27 : 40

Show answer and explanation

Answer: (A) 27 : 34 : 18 : 24 : 27 : 40

Step-by-step Solution:

Let the total gross compensation budget across all six leads be 100 units.

Using the formula Net Compensation=Gross×(1−Tax Rate)\text{Net Compensation} = \text{Gross} \times (1 - \text{Tax Rate}):

  • Lead A: Gross =15= 15; Tax =10%= 10\% of 15=1.515 = 1.5; Net =15−1.5=13.5= 15 - 1.5 = 13.5

  • Lead B: Gross =20= 20; Tax =15%= 15\% of 20=3.020 = 3.0; Net =20−3.0=17.0= 20 - 3.0 = 17.0

  • Lead C: Gross =10= 10; Tax =10%= 10\% of 10=1.010 = 1.0; Net =10−1.0=9.0= 10 - 1.0 = 9.0

  • Lead D: Gross =15= 15; Tax =20%= 20\% of 15=3.015 = 3.0; Net =15−3.0=12.0= 15 - 3.0 = 12.0

  • Lead E: Gross =15= 15; Tax =10%= 10\% of 15=1.515 = 1.5; Net =15−1.5=13.5= 15 - 1.5 = 13.5

  • Lead F: Gross =25= 25; Tax =20%= 20\% of 25=5.025 = 5.0; Net =25−5.0=20.0= 25 - 5.0 = 20.0

The ratio of their net compensations is:

13.5:17.0:9.0:12.0:13.5:20.013.5 : 17.0 : 9.0 : 12.0 : 13.5 : 20.0

Multiply by 2 to convert all terms into integers:

27:34:18:24:27:4027 : 34 : 18 : 24 : 27 : 40

Hence, the correct answer is 27 : 34 : 18 : 24 : 27 : 40.

Question 14 · Moderate

Directions for questions 13 to 16: Answer the questions on the basis of the information given below.

Six Principal Research Leads — Lead A (Ananya), Lead B (Bikram), Lead C (Chitra), Lead D (Deepak), Lead E (Esha), and Lead F (Faizan) — lead advanced research teams at Vertex Quantum Labs.

The first donut chart displays the break-up of the company's total gross compensation budget across these six leads. The second donut chart shows the statutory income tax rate withheld as a percentage of the respective lead's individual gross compensation.

Net Compensation=Gross Compensation−Tax Withheld\text{Net Compensation} = \text{Gross Compensation} - \text{Tax Withheld}

Vertex Quantum Labs: Compensation Breakdown & Statutory Tax

Compensation & Tax Rate Schedule:

  • Chart 1 (Gross Compensation Budget Share):

    • Lead A: 15%15\%

    • Lead B: 20%20\%

    • Lead C: 10%10\%

    • Lead D: 15%15\%

    • Lead E: 15%15\%

    • Lead F: 25%25\%

  • Chart 2 (Statutory Tax Withheld as % of Individual Gross Compensation):

    • Lead A: 10%10\%

    • Lead B: 15%15\%

    • Lead C: 10%10\%

    • Lead D: 20%20\%

    • Lead E: 10%10\%

    • Lead F: 20%20\%

What is the gross compensation of Lead A, if Lead F pays $6,000 as tax?

  1. A

    $15,000

  2. B

    $20,000

  3. C

    $16,500

  4. D

    $18,000

Show answer and explanation

Answer: (D) $18,000

Step-by-step Solution:

Lead F pays 20%20\% of their gross compensation as tax.

Given that Lead F pays $6,000\text{\textdollar}6,000 in tax:

Gross Compensation of Lead F=$6,0000.20=$30,000\text{Gross Compensation of Lead F} = \frac{\text{\textdollar}6,000}{0.20} = \text{\textdollar}30,000

From Chart 1, the shares of the total gross compensation budget are:

  • Lead F accounts for 25%25\%

  • Lead A accounts for 15%15\%

Therefore, the ratio of Lead A's gross compensation to Lead F's gross compensation is:

GrossAGrossF=15%25%=35=0.60\frac{\text{Gross}_A}{\text{Gross}_F} = \frac{15\%}{25\%} = \frac{3}{5} = 0.60

Calculating Lead A's gross compensation:

GrossA=0.60×$30,000=$18,000\text{Gross}_A = 0.60 \times \text{\textdollar}30,000 = \text{\textdollar}18,000

Hence, the gross compensation of Lead A is $18,000.

Question 15 · CAT Level

Directions for questions 13 to 16: Answer the questions on the basis of the information given below.

Six Principal Research Leads — Lead A (Ananya), Lead B (Bikram), Lead C (Chitra), Lead D (Deepak), Lead E (Esha), and Lead F (Faizan) — lead advanced research teams at Vertex Quantum Labs.

The first donut chart displays the break-up of the company's total gross compensation budget across these six leads. The second donut chart shows the statutory income tax rate withheld as a percentage of the respective lead's individual gross compensation.

Net Compensation=Gross Compensation−Tax Withheld\text{Net Compensation} = \text{Gross Compensation} - \text{Tax Withheld}

Vertex Quantum Labs: Compensation Breakdown & Statutory Tax

Compensation & Tax Rate Schedule:

  • Chart 1 (Gross Compensation Budget Share):

    • Lead A: 15%15\%

    • Lead B: 20%20\%

    • Lead C: 10%10\%

    • Lead D: 15%15\%

    • Lead E: 15%15\%

    • Lead F: 25%25\%

  • Chart 2 (Statutory Tax Withheld as % of Individual Gross Compensation):

    • Lead A: 10%10\%

    • Lead B: 15%15\%

    • Lead C: 10%10\%

    • Lead D: 20%20\%

    • Lead E: 10%10\%

    • Lead F: 20%20\%

What is the ratio of the total gross compensation budget of all the six leads to their total net compensation received?

  1. A

    25 : 21

  2. B

    10 : 9

  3. C

    20 : 17

  4. D

    40 : 33

Show answer and explanation

Answer: (C) 20 : 17

Step-by-step Solution:

Let the total gross compensation budget of all six leads be 100 units.

The individual tax deductions are:

  • Lead A: 10%10\% of 15=1.515 = 1.5

  • Lead B: 15%15\% of 20=3.020 = 3.0

  • Lead C: 10%10\% of 10=1.010 = 1.0

  • Lead D: 20%20\% of 15=3.015 = 3.0

  • Lead E: 10%10\% of 15=1.515 = 1.5

  • Lead F: 20%20\% of 25=5.025 = 5.0

Total tax withheld across all six leads:

Total Tax=1.5+3.0+1.0+3.0+1.5+5.0=15.0 units\text{Total Tax} = 1.5 + 3.0 + 1.0 + 3.0 + 1.5 + 5.0 = 15.0 \text{ units}

Total net compensation received:

Total Net Compensation=100−15.0=85.0 units\text{Total Net Compensation} = 100 - 15.0 = 85.0 \text{ units}

The ratio of total gross compensation to total net compensation is:

Total GrossTotal Net=10085=2017\frac{\text{Total Gross}}{\text{Total Net}} = \frac{100}{85} = \frac{20}{17}

Hence, the correct answer is 20 : 17.

Question 16 · CAT Level

Directions for questions 13 to 16: Answer the questions on the basis of the information given below.

Six Principal Research Leads — Lead A (Ananya), Lead B (Bikram), Lead C (Chitra), Lead D (Deepak), Lead E (Esha), and Lead F (Faizan) — lead advanced research teams at Vertex Quantum Labs.

The first donut chart displays the break-up of the company's total gross compensation budget across these six leads. The second donut chart shows the statutory income tax rate withheld as a percentage of the respective lead's individual gross compensation.

Net Compensation=Gross Compensation−Tax Withheld\text{Net Compensation} = \text{Gross Compensation} - \text{Tax Withheld}

Vertex Quantum Labs: Compensation Breakdown & Statutory Tax

Compensation & Tax Rate Schedule:

  • Chart 1 (Gross Compensation Budget Share):

    • Lead A: 15%15\%

    • Lead B: 20%20\%

    • Lead C: 10%10\%

    • Lead D: 15%15\%

    • Lead E: 15%15\%

    • Lead F: 25%25\%

  • Chart 2 (Statutory Tax Withheld as % of Individual Gross Compensation):

    • Lead A: 10%10\%

    • Lead B: 15%15\%

    • Lead C: 10%10\%

    • Lead D: 20%20\%

    • Lead E: 10%10\%

    • Lead F: 20%20\%

What is the ratio of the total tax collected from Leads A, B, and C put together to that collected from Leads D, E, and F put together?

  1. A

    19 : 11

  2. B

    9 : 17

  3. C

    13 : 19

  4. D

    11 : 19

Show answer and explanation

Answer: (D) 11 : 19

Step-by-step Solution:

Let the total gross budget be 100 units.

Tax collected from Leads A, B, and C:

  • Tax(A)=1.5\text{Tax}(A) = 1.5

  • Tax(B)=3.0\text{Tax}(B) = 3.0

  • Tax(C)=1.0\text{Tax}(C) = 1.0

Total Tax(A+B+C)=1.5+3.0+1.0=5.5 units\text{Total Tax}(A + B + C) = 1.5 + 3.0 + 1.0 = 5.5 \text{ units}

Tax collected from Leads D, E, and F:

  • Tax(D)=3.0\text{Tax}(D) = 3.0

  • Tax(E)=1.5\text{Tax}(E) = 1.5

  • Tax(F)=5.0\text{Tax}(F) = 5.0

Total Tax(D+E+F)=3.0+1.5+5.0=9.5 units\text{Total Tax}(D + E + F) = 3.0 + 1.5 + 5.0 = 9.5 \text{ units}

The ratio of tax collected from (A+B+C)(A + B + C) to that from (D+E+F)(D + E + F) is:

Tax(A+B+C)Tax(D+E+F)=5.59.5=5595=1119\frac{\text{Tax}(A + B + C)}{\text{Tax}(D + E + F)} = \frac{5.5}{9.5} = \frac{55}{95} = \frac{11}{19}

Hence, the correct answer is 11 : 19.

Question 17 · CAT Level

Directions for questions 17 to 20: Refer to the charts given below.

[CAT 1994 Re-themed]

Apex Orbitals developed the AeroSat-X deep-space exploration satellite. The following donut charts show:

  1. The distribution of total spacecraft structural mass across primary material categories (Chart 1).

  2. The distribution of the Titanium-Carbon Structural Alloy across various spacecraft functional assemblies (Chart 2).

Apex Orbitals: AeroSat-X Deep-Space Satellite Mass Breakdown

Mass Allocations:

  • Chart 1: Distribution of Material in AeroSat-X (as % of Total Spacecraft Mass):

    • Cryogenic Propellant: 65%65\%

    • Titanium-Carbon Structural Alloy: 20%20\%

    • Avionics & Scientific Payload: 15%15\%

  • Chart 2: Distribution of Titanium-Carbon Structural Alloy across Subsystems (as % of Total Alloy Mass):

    • Solar Panel Deployment Booms: 5%5\%

    • Main Propulsion Engine Mounts: 20%20\%

    • Radiation & Thermal Shielding Shell: 25%25\%

    • Primary Core Truss Structure: 50%50\%

What fraction of AeroSat-X's total spacecraft mass consists of the Titanium-Carbon structural alloy used in the Solar Panel Deployment Booms and Main Propulsion Engine Mounts put together?

  1. A

    1/15

  2. B

    1/25

  3. C

    1/20

  4. D

    Cannot be determined

Show answer and explanation

Answer: (C) 1/20

Step-by-step Solution:

From Chart 2, the share of the Titanium-Carbon structural alloy accounted for by the Solar Panel Deployment Booms and Main Propulsion Engine Mounts combined is:

Booms Share+Engine Mounts Share=5%+20%=25% of total Structural Alloy mass\text{Booms Share} + \text{Engine Mounts Share} = 5\% + 20\% = 25\% \text{ of total Structural Alloy mass}

From Chart 1, the Titanium-Carbon Structural Alloy constitutes 20%20\% of the total spacecraft mass.

Therefore, the mass of alloy in these two assemblies as a fraction of the total spacecraft mass is:

Fraction of Total Mass=25%×20%=0.25×0.20=0.05\text{Fraction of Total Mass} = 25\% \times 20\% = 0.25 \times 0.20 = 0.05

Converting to a simple fraction:

0.05=5100=1200.05 = \frac{5}{100} = \frac{1}{20}

Hence, the correct answer is 1/20.

Question 18 · CAT Level

Directions for questions 17 to 20: Refer to the charts given below.

[CAT 1994 Re-themed]

Apex Orbitals developed the AeroSat-X deep-space exploration satellite. The following donut charts show:

  1. The distribution of total spacecraft structural mass across primary material categories (Chart 1).

  2. The distribution of the Titanium-Carbon Structural Alloy across various spacecraft functional assemblies (Chart 2).

Apex Orbitals: AeroSat-X Deep-Space Satellite Mass Breakdown

Mass Allocations:

  • Chart 1: Distribution of Material in AeroSat-X (as % of Total Spacecraft Mass):

    • Cryogenic Propellant: 65%65\%

    • Titanium-Carbon Structural Alloy: 20%20\%

    • Avionics & Scientific Payload: 15%15\%

  • Chart 2: Distribution of Titanium-Carbon Structural Alloy across Subsystems (as % of Total Alloy Mass):

    • Solar Panel Deployment Booms: 5%5\%

    • Main Propulsion Engine Mounts: 20%20\%

    • Radiation & Thermal Shielding Shell: 25%25\%

    • Primary Core Truss Structure: 50%50\%

What is the ratio of the distribution of Titanium-Carbon alloy in the Main Propulsion Engine Mounts to that in the Solar Panel Deployment Booms?

  1. A

    4 : 1

  2. B

    1 : 4

  3. C

    3 : 1

  4. D

    5 : 2

Show answer and explanation

Answer: (A) 4 : 1

Step-by-step Solution:

From Chart 2:

  • Main Propulsion Engine Mounts account for 20%20\% of the total Titanium-Carbon alloy mass.

  • Solar Panel Deployment Booms account for 5%5\% of the total Titanium-Carbon alloy mass.

Since both allocations are calculated against the same base (the total mass of Titanium-Carbon structural alloy), the ratio of alloy distribution is:

Alloy in Engine MountsAlloy in Solar Booms=20%5%=41=4:1\frac{\text{Alloy in Engine Mounts}}{\text{Alloy in Solar Booms}} = \frac{20\%}{5\%} = \frac{4}{1} = 4 : 1

Hence, the correct answer is 4 : 1.

Question 19 · CAT Level

Directions for questions 17 to 20: Refer to the charts given below.

[CAT 1994 Re-themed]

Apex Orbitals developed the AeroSat-X deep-space exploration satellite. The following donut charts show:

  1. The distribution of total spacecraft structural mass across primary material categories (Chart 1).

  2. The distribution of the Titanium-Carbon Structural Alloy across various spacecraft functional assemblies (Chart 2).

Apex Orbitals: AeroSat-X Deep-Space Satellite Mass Breakdown

Mass Allocations:

  • Chart 1: Distribution of Material in AeroSat-X (as % of Total Spacecraft Mass):

    • Cryogenic Propellant: 65%65\%

    • Titanium-Carbon Structural Alloy: 20%20\%

    • Avionics & Scientific Payload: 15%15\%

  • Chart 2: Distribution of Titanium-Carbon Structural Alloy across Subsystems (as % of Total Alloy Mass):

    • Solar Panel Deployment Booms: 5%5\%

    • Main Propulsion Engine Mounts: 20%20\%

    • Radiation & Thermal Shielding Shell: 25%25\%

    • Primary Core Truss Structure: 50%50\%

What percentage of AeroSat-X's total spacecraft mass is made up of the Solar Panel Deployment Booms assembly?

  1. A

    1.0%

  2. B

    5.0%

  3. C

    0.25%

  4. D

    Cannot be determined

Show answer and explanation

Answer: (D) Cannot be determined

Step-by-step Solution:

From Chart 2, the Titanium-Carbon alloy allocated to the Solar Panel Deployment Booms represents 5%5\% of the total structural alloy, which corresponds to:

0.05×20%=1.0% of the total spacecraft mass0.05 \times 20\% = 1.0\% \text{ of the total spacecraft mass}

However, this 1.0%1.0\% reflects only the Titanium-Carbon structural alloy content of the deployment booms. The physical Solar Panel Deployment Booms assembly also comprises photovoltaic cells, electrical wiring harnesses, deployment actuators, sensors, and thermal insulation.

Because no data is provided regarding the total assembly mass or the non-alloy material components of the Solar Panel Deployment Booms, the total mass of the booms assembly as a percentage of the spacecraft's mass cannot be determined.

Hence, the correct answer is Cannot be determined.

Question 20 · CAT Level

Directions for questions 17 to 20: Refer to the charts given below.

[CAT 1994 Re-themed]

Apex Orbitals developed the AeroSat-X deep-space exploration satellite. The following donut charts show:

  1. The distribution of total spacecraft structural mass across primary material categories (Chart 1).

  2. The distribution of the Titanium-Carbon Structural Alloy across various spacecraft functional assemblies (Chart 2).

Apex Orbitals: AeroSat-X Deep-Space Satellite Mass Breakdown

Mass Allocations:

  • Chart 1: Distribution of Material in AeroSat-X (as % of Total Spacecraft Mass):

    • Cryogenic Propellant: 65%65\%

    • Titanium-Carbon Structural Alloy: 20%20\%

    • Avionics & Scientific Payload: 15%15\%

  • Chart 2: Distribution of Titanium-Carbon Structural Alloy across Subsystems (as % of Total Alloy Mass):

    • Solar Panel Deployment Booms: 5%5\%

    • Main Propulsion Engine Mounts: 20%20\%

    • Radiation & Thermal Shielding Shell: 25%25\%

    • Primary Core Truss Structure: 50%50\%

In terms of total spacecraft mass, the portion of material other than Cryogenic Propellant and Titanium-Carbon Structural Alloy is equal to:

  1. A

    3/20

  2. B

    1/5

  3. C

    7/20

  4. D

    1/10

Show answer and explanation

Answer: (A) 3/20

Step-by-step Solution:

From Chart 1, the total spacecraft mass is partitioned into:

  • Cryogenic Propellant: 65%65\%

  • Titanium-Carbon Structural Alloy: 20%20\%

  • Avionics & Scientific Payload (all material other than propellant and alloy): 15%15\%

Material other than Propellant and Alloy=100%−(65%+20%)=15%\text{Material other than Propellant and Alloy} = 100\% - (65\% + 20\%) = 15\%

Converting 15%15\% into a reduced fraction:

15100=320\frac{15}{100} = \frac{3}{20}

Hence, the correct answer is 3/20.

Try real CAT questions

Study this concept with interactive practice in PrepSoc.

Open the concept library