Arrangement: Concepts & Solved Examples
Master the architectural principles of Linear, Dual-Row, Circular, and Polygonal Arrangements in CAT DILR. Learn to model entity-slot topologies, navigate perspective reversals (North vs South, Inward vs Outward), exploit separation metrics ( p A - p B - 1), and deploy systematic 4-phase constraint propagation pipelines.
1. Foundational Taxonomy of Arrangement Problems
In Data Interpretation and Logical Reasoning (DILR), Arrangement puzzles require mapping a finite set of distinct entities into an ordered geometric configuration of slots . While seemingly straightforward, CAT-level arrangement sets superimpose complex relational constraints, hidden polarities, dual-attribute matrices, and branching conditional dependencies.
The standard geometries tested in CAT comprise four distinct topologies:
-
Unidirectional Linear Row: A single sequence of slots along an axis, where entities face a uniform cardinal direction (typically North or South).
-
Dual Opposing Parallel Rows: Two parallel lines of entities facing each other (e.g., Row 1 facing South and Row 2 facing North), establishing direct face-to-face and cross-diagonal relationships.
-
Circular Rings: Periodic closed loops where relative orientation (Inward toward the center vs. Outward away from the center) governs directional parity (clockwise vs. counter-clockwise).
-
Polygonal & Conference Tables: Rectangular, square, or hexagonal layouts distinguishing between corner seats and middle/edge seats, with defined face-to-face and diagonal vectors.
2. Linear Row Positioning & Directional Perspectives
Single-Row Coordinate Frame
Let a row of slots be indexed from left to right as .
| Slot 1 | Slot 2 | Slot 3 | … | Slot $n-1$ | Slot $n$ |
|---|---|---|---|---|---|
| Left Extreme End | Interior Slot | Interior Slot | … | Interior Slot | Right Extreme End |
-
Facing North:
-
The entity's left aligns with the viewer's left (towards lower index slots, ).
-
The entity's right aligns with the viewer's right (towards higher index slots, ).
-
-
Facing South:
-
The entity's left points towards the viewer's right (higher indices, ).
-
The entity's right points towards the viewer's left (lower indices, ).
-
Mathematical Separation Metrics
-
Immediate Neighbors / Adjacency: Two entities at slots and are adjacent if and only if:
-
Intervening Elements Count: The number of entities strictly situated between slot and slot is given by:
Critical Trap: If clue states "There are 3 servers between Rack A and Rack B", the slot difference is , not .
-
Offset Step Operator: "A is situated places to the left of B" (facing North):
3. Dual Parallel Opposing Rows
In dual-row configurations, entities in Row 1 face entities in Row 2.
| Row 1 (Facing South ↓ : Right = West / Viewer Left, Left = East / Viewer Right) | ||||
|---|---|---|---|---|
| Slot 1 (West) | Slot 2 | … | Slot $m-1$ | Slot $m$ (East) |
| ↔ Corridor / Line of Sight ↔ | ||||
| Slot 1 (West) | Slot 2 | … | Slot $m-1$ | Slot $m$ (East) |
| Row 2 (Facing North ↑ : Left = West / Viewer Left, Right = East / Viewer Right) | ||||
Positional Relationships Across Rows
-
Directly Facing Pairs: An entity at Row 1, Slot directly faces the entity at Row 2, Slot .
-
Diagonally Opposite Extreme Ends:
-
Pair 1: Row 1, Slot 1 and Row 2, Slot .
-
Pair 2: Row 1, Slot and Row 2, Slot 1.
-
-
Perspective Inversion Rule: Always establish a fixed cardinal axis (e.g., West = Index 1, East = Index ). A person in Row 1 moving to their "right" moves toward West (decreasing index), whereas a person in Row 2 moving to their "right" moves toward East (increasing index).
4. Circular Arrangements & Modulo Directional Calculus
In a circular arrangement of positions (indexed to clockwise), there are no extreme ends. Rotational invariance means the first entity can be fixed arbitrarily to establish the reference frame.
| Orientation | Direction: To One's Right | Direction: To One's Left |
|---|---|---|
| Facing Inward (Towards Center) | Counter-Clockwise (CCW / Decreasing Index) | Clockwise (CW / Increasing Index) |
| Facing Outward (Away from Center) | Clockwise (CW / Increasing Index) | Counter-Clockwise (CCW / Decreasing Index) |
Circular Metric Properties
-
Geodesic Distance: The shortest distance along the ring between slot and slot is:
-
Diametric Opposites (Even ): Slots and are directly opposite if:
In an 8-seater circle, the opposite of slot is .
-
Mixed Orientation Protocol: When some entities face inward and others face outward:
-
Determine the spatial position of the reference entity first.
-
Inspect that entity's facing bit (Inward vs Outward).
-
Apply the appropriate parity step to position the neighbor.
-
5. Polygonal & Conference Table Layouts
Conference tables typically feature seats along the longer edges and shorter ends.
| North Edge (Facing Inward ↓) | |||
|---|---|---|---|
| Seat 1 (Corner) | Seat 2 (Edge) | Seat 3 (Edge) | Seat 4 (Corner) |
| — Conference Table Surface — | |||
| Seat 8 (Corner) | Seat 7 (Edge) | Seat 6 (Edge) | Seat 5 (Corner) |
| South Edge (Facing Inward ↑) | |||
-
Opposing Seats: Seat 1 faces Seat 8; Seat 2 faces Seat 7; Seat 3 faces Seat 6; Seat 4 faces Seat 5.
-
Corner Seats: Seats 1, 4, 5, 8. Each corner seat has exactly one collinear neighbor along its edge.
-
Diagonally Opposite Corners:
-
Seat 1 is diagonally opposite Seat 5.
-
Seat 4 is diagonally opposite Seat 8.
-
6. The Master 4-Phase Solving Protocol
+-------------------------------------------------------------------+
| Phase 1: Topological Setup & Grid Framework |
| - Identify geometry: Linear (1D), Dual-Row, Circular, Polygonal. |
| - Establish index conventions (1..n, West->East, Clockwise). |
+-------------------------------------------------------------------+
|
v
+-------------------------------------------------------------------+
| Phase 2: Anchor Placement (Absolute Coordinates) |
| - Place entities with fixed coordinates (e.g., "Apex is in middle" |
| or "Akash is at Seat 4"). |
+-------------------------------------------------------------------+
|
v
+-------------------------------------------------------------------+
| Phase 3: Relative Constraint Propagation & Block Formation |
| - Form rigid blocks: [A, B] adjacency or A _ _ B fixed offsets. |
| - Intersect domain restrictions with available open slots. |
+-------------------------------------------------------------------+
|
v
+-------------------------------------------------------------------+
| Phase 4: Systematic Branching & Contradiction Elimination |
| - If multiple valid slot pairs remain, branch into Case A / B. |
| - Test remaining clues against each branch; eliminate conflicts. |
| - Extract unique invariants across all surviving configurations. |
+-------------------------------------------------------------------+
Formulas
| Linear Separation & Intervening Metric | |
|---|---|
| Circular Shortest Geodesic Distance | |
| Circular Directional Step Operator | |
| Dual-Row Parallel Conference Opposition |
Traps and tips
- Trap 1: The 'Between' Count Off-by-One Error — When a clue states 'there are three servers situated between Rack P and Rack Q', the positional difference is , not . Confusing intervening element count with coordinate distance leads to corrupted slot allocations.
- Trap 2: The 'To the Left/Right' vs 'Immediately to the Left/Right' Distinction — In CAT arrangements, 'A sits to the left of B' means (anywhere to the left). It does NOT imply adjacency unless the qualifier 'immediately' or 'consecutive' is explicitly present.
- Trap 3: Perspective Inversion in Opposing Rows — When entities face each other across a table or corridor (Row 1 facing South, Row 2 facing North), their left/right references are mutually inverted. An entity in Row 1 turning to their right moves towards the viewer's left, whereas an entity in Row 2 turning to their right moves towards the viewer's right.
- Trap 4: Circular Mixed-Orientation Misattribution — In mixed inward/outward circular seating, never determine the neighbor's position before confirming the facing orientation of the reference node. An inward observer's right is counter-clockwise, whereas an outward observer's right is clockwise.
- Tip 5: Deploy Extreme-Offset Anchors First — Prioritize clues with the largest rigid offsets (e.g., 'A is 4 places to the right of B' in a 7-element row). In a 7-slot row, an offset of 4 restricts valid placements to just three candidate pairs: or , drastically collapsing the search space before evaluating secondary clues.
Solved examples
Solved Example Set 1: Questions 1 to 4 (High-Density AI Compute Racks & Power Draws)
Directions for Questions 1 to 4
In an enterprise AI Datacenter, seven high-density server racks—designated Alpha, Apex, Cypher, Delta, Forge, Fusion, and Giga—are aligned along a primary liquid-cooling corridor.
The racks are installed in a single row in strictly increasing order of their continuous power draws (in kilowatts, kW), either from left to right or from right to left. It is known that their power draws are seven consecutive natural numbers between 11 kW and 20 kW, both inclusive.
Furthermore, the facilities engineering team provides the following structural clues:
-
Clue I: Rack Alpha consumes exactly 3 kW more power than Rack Delta.
-
Clue II: Rack Apex is situated in the exact middle of the row (Slot 4).
-
Clue III: The absolute difference between the power draws of Rack Apex and Rack Fusion, which has the lower power draw between the two, is identical to the absolute difference between the power draws of Rack Delta and Rack Cypher, which has the higher power draw between the two.
-
Clue IV: Rack Fusion consumes less power than Rack Giga.
Question 1
The absolute difference between the continuous power draws of Rack Forge and Rack Apex is identical to the absolute difference between the continuous power draws of Rack Delta and:
(1) Alpha
(2) Apex
(3) Cypher
(4) Forge
Question 2
The absolute difference between the continuous power draws (in Watts) of Rack Giga and Rack Delta is:
(1) 1,000 W
(2) 2,000 W
(3) 4,000 W
(4) Cannot be determined
Question 3
The maximum possible value of the continuous power draw of Rack Alpha exceeds the minimum possible value of the continuous power draw of Rack Fusion by:
(1) 5 kW
(2) 6 kW
(3) 7 kW
(4) 8 kW
Question 4
What is the arithmetic mean of all possible continuous power draws (in kW) of Rack Delta?
(1) 13 kW
(2) 14 kW
(3) 14.5 kW
(4) Cannot be determined
Show solution
Step-by-Step Deductive Solution
1. Mathematical Coordinate Mapping
Let the seven sequential rack slots be indexed in increasing order of continuous power draw. Since the power ratings are seven consecutive natural numbers, the difference in power draw between any two slots and in kW is precisely equal to their positional separation:
2. Constraint Processing & Anchor Placement
-
Middle Slot Anchor (Clue II):
-
Alpha-Delta Offset (Clue I):
-
Since Slot 4 is occupied by Apex, Delta cannot be at Slot 4 (which would require Alpha at Slot 7).
-
If Alpha were at Slot 7, Delta would be at Slot 4 (conflict with Apex).
-
If Delta were at Slot 1, Alpha would be at Slot 4 (conflict with Apex).
-
Thus, the only possible candidate pairs for are:
-
Branch 1:
-
Branch 2:
-
-
-
Parity Difference Equation (Clue III):
where and .
-
Testing Branch 1 ():
-
Fusion must be at Slot 1 or Slot 3.
-
If Fusion : . But Slot 5 is occupied by Alpha! Contradiction.
-
If Fusion : . But Slot 3 is already occupied by Fusion! Contradiction.
-
Hence, Branch 1 is completely invalid.
-
-
Testing Branch 2 ():
-
Fusion must be at Slot 1 or Slot 2.
-
If Fusion : . But Slot 6 is occupied by Alpha! Contradiction.
-
If Fusion : . Valid!
-
Slots remaining: Slot 1 and Slot 7.
-
Racks remaining: Forge and Giga.
-
Clue IV dictates: . Since Fusion is at Slot 2, Giga can occupy Slot 7.
-
Thus: and .
-
Master Rack Arrangement Table
| Slot 1 | Slot 2 | Slot 3 | Slot 4 | Slot 5 | Slot 6 | Slot 7 |
|---|---|---|---|---|---|---|
| Forge | Fusion | Delta | Apex | Cypher | Alpha | Giga |
| Lowest kW | ↑ | ↑ | Middle | ↑ | ↑ | Highest kW |
Numeric Range Evaluation
The 7 power values are consecutive natural numbers in . The possible sets of 7 consecutive numbers are:
-
Set A:
-
Set B:
-
Set C:
-
Set D:
Question-by-Question Answers
Question 1:
-
Difference between Forge (Slot 1) and Apex (Slot 4) .
-
For Rack Delta (Slot 3), a difference of corresponds to Slot , which is Rack Alpha.
-
Correct Choice: (1) Alpha
Question 2:
-
Positional difference between Giga (Slot 7) and Delta (Slot 3) .
-
Converting to Watts: .
-
Correct Choice: (3) 4,000 W
Question 3:
-
Maximum possible power draw of Alpha (Slot 6) occurs under Set D: .
-
Minimum possible power draw of Fusion (Slot 2) occurs under Set A: .
-
Difference .
-
Correct Choice: (3) 7 kW
Question 4:
-
Possible power ratings for Delta (Slot 3) across the four valid sets: .
-
Arithmetic Mean:
-
Correct Choice: (3) 14.5 kW
Solved Example Set 2: Questions 5 to 8 (Robotics Architecture Scrum Seating & Workstreams)
Directions for Questions 5 to 8
An autonomous robotics engineering squad consists of 5 core specialists: Lead Architect Vance (Team Lead), Systems Director Nadia (Director), and three junior engineers: Priya (Sensor Fusion Engineer), Pax (Senior Motion Planner), and Sam (Junior Controls Engineer).
During an executive scrum, they sit in a single row of five chairs (numbered 1 to 5 from left to right). Each of them leads exactly one specialized engineering workstream out of 5 domains:
-
3 Compute-Intensive Workstreams: Neural Vision, LiDAR SLAM, Predictive Pathing.
-
2 Logic/Heuristic Workstreams: State Estimation, Safety Formal Verification.
The squad's composition is subject to the following structural and protocol constraints:
-
Clue (i): Priya is not seated adjacent to Lead Architect Vance.
-
Clue (ii): No junior engineer is seated adjacent to both principal leads (Vance and Nadia).
-
Clue (iii): Exactly one of the principal leads leads a compute-intensive workstream.
-
Clue (iv): One of the principal leads, who heads State Estimation, is seated adjacent to two of the junior engineers.
-
Clue (v): The engineers leading Predictive Pathing and State Estimation are seated immediately adjacent to each other.
-
Clue (vi): The engineers leading the two logic/heuristic workstreams are not seated adjacent to each other.
-
Clue (vii): All three male engineers of the squad (Vance, Pax, Sam) are not seated together in a contiguous trio.
-
Clue (viii): The number of engineers seated to the right of the State Estimation engineer is not greater than the number of engineers seated to their left.
Question 5
Based on the given information, which of the following can be determined uniquely?
(1) The workstream led by Lead Architect Vance
(2) Which engineer leads Safety Formal Verification
(3) The engineer who is seated at the middle position
(4) Which engineer leads Predictive Pathing
Question 6
If senior motion planner Pax leads Neural Vision, which workstream is led by junior controls engineer Sam?
(1) Predictive Pathing
(2) Safety Formal Verification
(3) LiDAR SLAM
(4) Cannot be determined
Question 7
Which of the following conditions is required and sufficient to uniquely determine the workstream led by Lead Architect Vance?
(1) Junior controls engineer Sam leads Safety Formal Verification
(2) Sensor fusion engineer Priya leads LiDAR SLAM
(3) Sensor fusion engineer Priya leads Predictive Pathing
(4) No additional information is required
Question 8
The seating position of how many members of the squad can be determined uniquely?
(1) 2
(2) 3
(3) 1
(4) All 5
Show solution
Step-by-Step Deductive Solution
1. Entity & Attribute Setup
-
Squad Members: Vance (Male, Principal Lead), Nadia (Female, Principal Lead), Priya (Female, Junior), Pax (Male, Junior), Sam (Male, Junior).
-
Junior Engineers: .
-
Workstreams:
-
Compute-Intensive: .
-
Logic/Heuristic: .
-
2. Deducing Positions & Roles
-
Position of State Estimation Lead (Clue iv & viii):
-
One principal lead heads State Estimation and is adjacent to two junior engineers this principal lead cannot be at an extreme end (Slots 1 or 5). They must sit at Slot 2, 3, or 4.
-
Clue (viii): Count of people to their right count of people to their left.
-
Slot index : People to right , people to left .
-
.
-
-
If State Estimation lead were at Slot 3 (middle), the two adjacent seats (Slots 2 and 4) would both be junior engineers. Then the other principal lead must be at Slot 1 or Slot 5. But then the junior engineer at Slot 2 or Slot 4 would be adjacent to both principal leads (e.g., if other lead is at Slot 1, junior at Slot 2 touches Slot 1 and Slot 3), violating Clue (ii)!
-
Thus, the State Estimation lead cannot be at Slot 3.
-
Therefore, the State Estimation lead MUST be at Slot 4.
-
-
Positions of the Two Principal Leads:
-
The State Estimation lead is at Slot 4. Their two adjacent seats (Slots 3 and 5) must be junior engineers (Clue iv).
-
Thus, the other principal lead must occupy an extreme end: Slot 1.
-
Clue (ii) ensures no junior engineer is adjacent to both principal leads: Slot 1 (Lead 1), Slot 2 (Junior), Slot 3 (Junior), Slot 4 (Lead 2), Slot 5 (Junior).
-
Slot 2 touches Lead 1 (Slot 1) and Junior (Slot 3). Valid!
-
Slot 3 touches Junior (Slot 2) and Lead 2 (Slot 4). Valid!
-
Slot 5 touches Lead 2 (Slot 4). Valid!
-
-
-
Identifying Which Principal Lead is Where:
-
Clue (i): Priya cannot sit adjacent to Lead Architect Vance.
-
Clue (vii): All 3 males (Vance, Pax, Sam) cannot sit together.
-
If Nadia were at Slot 1 (Lead 1) and Vance at Slot 4 (Lead 2):
-
Priya cannot sit next to Vance Priya cannot be at Slot 3 or Slot 5.
-
So Priya must be at Slot 2 (adjacent to Nadia).
-
But then Slots 3, 4, 5 would be occupied by Pax, Vance, and Sam—a contiguous block of three males, violating Clue (vii)!
-
-
Therefore, Nadia cannot be at Slot 1.
-
Lead Architect Vance MUST be at Slot 1, and Systems Director Nadia MUST be at Slot 4 (State Estimation)!
-
-
Positioning Priya and the Junior Engineers:
-
Vance is at Slot 1. Priya cannot sit adjacent to Vance (Clue i) Priya cannot be at Slot 2.
-
Nadia is at Slot 4, and Slots 3 and 5 are junior engineers.
-
If Priya were at Slot 5: Slots 1, 2, 3 would be Vance, Pax, Sam (three contiguous males), violating Clue (vii)!
-
Hence, Priya MUST be at Slot 3 (the exact middle position)!
-
Slots 2 and 5 are occupied by .
-
-
Workstream Allocations:
-
Nadia (Slot 4) heads State Estimation (Logic/Heuristic).
-
Clue (iii): Exactly one principal lead heads a compute-intensive workstream. Since Nadia heads a logic workstream, Vance MUST head a compute-intensive workstream (Neural Vision or LiDAR SLAM).
-
Clue (vi): Logic workstreams cannot be adjacent. State Estimation is at Slot 4 Safety Formal Verification cannot be at Slot 3 or Slot 5.
-
Since Vance is compute-intensive, the only slot available for Safety Formal Verification is Slot 2!
-
Therefore, the engineer at Slot 2 (Pax or Sam) heads Safety Formal Verification.
-
Clue (v): Predictive Pathing must be adjacent to State Estimation (Slot 4) Predictive Pathing is at Slot 3 or Slot 5.
-
Master Scrum Seating Table
| Slot 1 | Slot 2 | Slot 3 | Slot 4 | Slot 5 |
|---|---|---|---|---|
| Vance | Pax or Sam | Priya | Nadia | Sam or Pax |
| Compute-Intensive | Safety Verification | Compute-Intensive | State Estimation | Compute-Intensive |
Question-by-Question Answers
Question 5:
-
Priya's position at Slot 3 (the exact middle) is uniquely fixed.
-
Correct Choice: (3) The engineer who is seated at the middle position
Question 6:
-
If senior engineer Pax leads Neural Vision (a compute workstream), Pax cannot occupy Slot 2 (which is dedicated to Safety Formal Verification).
-
Hence, Pax must occupy Slot 5, meaning junior engineer Sam occupies Slot 2 and leads Safety Formal Verification.
-
Correct Choice: (2) Safety Formal Verification
Question 7:
-
The three compute workstreams are Neural Vision, LiDAR SLAM, and Predictive Pathing.
-
Predictive Pathing must be adjacent to State Estimation (Slot 4) either Slot 3 or Slot 5.
-
If Priya (Slot 3) leads LiDAR SLAM, she does not lead Predictive Pathing, forcing Slot 5 to lead Predictive Pathing.
-
That leaves Neural Vision as the sole remaining compute workstream, which must be assigned to Vance (Slot 1).
-
Thus, knowing Priya leads LiDAR SLAM uniquely resolves Vance's workstream!
-
Correct Choice: (2) Sensor fusion engineer Priya leads LiDAR SLAM
Question 8:
-
The positions of exactly three individuals are uniquely fixed: Vance (Slot 1), Priya (Slot 3), and Nadia (Slot 4). Pax and Sam can freely interchange between Slots 2 and 5.
-
Correct Choice: (2) 3
Solved Example Set 3: Questions 9 to 12 (Cloud Platform Microservices & Deployment Runtimes)
Directions for Questions 9 to 12
Five principal cloud architects—Aaron, Victor, Vance, Preston, and Austin—operate under five internal security codenames: Shadow, Titan, Blaze, Matrix, and Ghost (not necessarily in that order).
To deploy a mission-critical financial ledger, each architect deployed an isolated microservice onto a distinct cloud hosting platform selected from: BaseCloud, ComputeCore, MeshGrid, MegaNet, and KubeStack. Each cloud platform utilizes a distinct runtime communication protocol from: FastRPC, ProtoBuf, V8-Engine, MeshProtocol, and ComputePipeline.
The platform architecture satisfies the following specifications:
-
Clue I: Aaron, whose security codename is neither Shadow nor Titan, did not deploy on KubeStack.
-
Clue II: Preston, whose security codename is Ghost, did not deploy V8-Engine and did not deploy on ComputeCore.
-
Clue III: The architect codenamed Matrix, who is neither Austin nor Aaron, deployed their service on BaseCloud.
-
Clue IV: Austin deployed a runtime protocol whose name begins with the exact same initial letter as the cloud platform on which it is hosted. The same alliterative property holds true for exactly one other architect, who is neither Victor nor Ghost.
-
Clue V: V8-Engine was deployed on MegaNet, and Vance deployed the ProtoBuf runtime protocol.
-
Clue VI: Each architect possesses a unique codename, deploys onto a unique cloud platform, and utilizes a unique runtime protocol.
Question 9
Who among the following CANNOT be the architect who deployed on ComputeCore?
I. Blaze
II. Shadow
III. Austin
IV. Victor
(1) I and III
(2) II, III and IV
(3) Only IV
(4) None of these
Question 10
If Aaron deployed ComputePipeline, then which runtime protocol was deployed by the architect codenamed Shadow?
(1) V8-Engine
(2) MeshProtocol
(3) FastRPC
(4) Cannot be determined
Question 11
Which runtime communication protocol was deployed on BaseCloud?
(1) ProtoBuf
(2) FastRPC
(3) ComputePipeline
(4) MeshProtocol
Question 12
On how many of the following cloud platforms could the architect codenamed Titan deploy?
I. MeshGrid
II. MegaNet
III. ComputeCore
(1) I and II
(2) I and III
(3) II and III
(4) I, II and III
Show solution
Step-by-Step Deductive Solution
1. Initial Letter Matching Analysis (Clue IV & V)
-
Platforms: BaseCloud (B), ComputeCore (C), MeshGrid (M), MegaNet (M), KubeStack (K).
-
Runtime Protocols: FastRPC (F), ProtoBuf (P), V8-Engine (V), MeshProtocol (M), ComputePipeline (C).
-
Potential same-initial letter pairs:
-
Initial C: ComputeCore & ComputePipeline
-
Initial M: MeshGrid & MeshProtocol or MegaNet & MeshProtocol
-
-
Clue V explicitly fixes: MegaNet hosts V8-Engine. Therefore, MegaNet does NOT host MeshProtocol.
-
Hence, the ONLY TWO possible same-initial pairs across the entire cluster are:
-
ComputeCore ComputePipeline
-
MeshGrid MeshProtocol
-
2. Deducing Architect Codenames & Platforms
-
Preston = Ghost (Clue II).
-
Aaron's Codename:
-
Aaron is not Shadow or Titan (Clue I).
-
Aaron is not Matrix (Clue III).
-
Aaron is not Ghost (Preston is Ghost).
-
Therefore, Aaron MUST be Blaze!
-
-
Matrix's Identity:
-
Matrix deployed on BaseCloud (Clue III).
-
Matrix is not Austin, Aaron, or Preston (Ghost).
-
Matrix must be either Victor or Vance.
-
Clue V states: Vance deployed ProtoBuf.
-
If Victor were Matrix, Victor would deploy on BaseCloud. Then who has the same-initial pairs?
-
Clue IV states: Austin has a same-initial pair, and exactly one other architect (neither Victor nor Ghost) has a same-initial pair.
-
The other architect must be Aaron (since Preston is Ghost and Vance/Victor are restricted).
-
Thus, Aaron and Austin divide the two same-initial pairs: and .
-
Neither Aaron nor Austin deployed on BaseCloud.
-
Since Victor did not have a same-initial pair, Victor is left with MegaNet (hosting V8-Engine).
-
That leaves BaseCloud and KubeStack.
-
Vance deployed ProtoBuf Vance must be the architect on BaseCloud!
-
Thus, Vance is Matrix, deploying ProtoBuf on BaseCloud!
-
-
Preston's Platform:
-
Preston (Ghost) cannot deploy on ComputeCore or MegaNet (hosts V8-Engine).
-
BaseCloud is Vance.
-
Thus, Preston deployed on KubeStack with the remaining protocol: FastRPC!
-
-
Victor's Assignment:
- Victor deployed on MegaNet with V8-Engine.
-
Resolving Ambiguities:
-
Victor and Austin share the codenames .
-
Aaron and Austin share the platforms and protocols .
-
Master Microservice Architecture Table
| Architect | Security Codename | Cloud Platform | Runtime Protocol |
|---|---|---|---|
| Aaron | Blaze | ComputeCore / MeshGrid | ComputePipeline / MeshProtocol |
| Victor | Shadow / Titan | MegaNet | V8-Engine |
| Vance | Matrix | BaseCloud | ProtoBuf |
| Preston | Ghost | KubeStack | FastRPC |
| Austin | Titan / Shadow | MeshGrid / ComputeCore | MeshProtocol / ComputePipeline |
Question-by-Question Answers
Question 9:
-
ComputeCore is deployed by either Aaron (Blaze) or Austin (who could be Shadow or Titan).
-
Victor definitely deployed on MegaNet; thus Victor CANNOT deploy on ComputeCore.
-
Correct Choice: (3) Only IV
Question 10:
-
If Aaron deployed ComputePipeline (on ComputeCore), then Austin deployed MeshProtocol (on MeshGrid).
-
However, Shadow can be either Victor (who deployed V8-Engine) or Austin (who deployed MeshProtocol).
-
Since Shadow's underlying architect cannot be uniquely determined, their runtime protocol cannot be determined.
-
Correct Choice: (4) Cannot be determined
Question 11:
-
BaseCloud was deployed by Vance (Matrix) using ProtoBuf.
-
Correct Choice: (1) ProtoBuf
Question 12:
-
Titan can be Victor (in which case Titan deploys on MegaNet) or Austin (in which case Titan deploys on either MeshGrid or ComputeCore).
-
Therefore, Titan could deploy on any of the three platforms (MeshGrid, MegaNet, or ComputeCore).
-
Correct Choice: (4) I, II and III
Solved Example Set 4: Questions 13 to 16 (Orbital Research Satellites & Scientific Payloads)
Directions for Questions 13 to 16
Seven orbital research satellites—designated P, Q, R, S, T, U, and V—are positioned in a single linear sun-synchronous orbital track in slots 1 to 7 from West to East (left to right).
Each satellite carries a distinct scientific instrumentation payload selected from: Atmospheric Chemistry, Astrophysics Observatory, Electromagnetic Sounder, Quantum Magnetometer, Infrared Radiometer, Bio-Payload Synthesizer, and Geospatial Radar.
The constellation operations center provides the following orbital tracking telemetry:
-
Clue (i): The number of satellites situated to the West (left) of satellite R is equal to the number of satellites situated to the East (right) of the satellite carrying the Bio-Payload Synthesizer.
-
Clue (ii): The satellite carrying the Infrared Radiometer is positioned at the fourth slot to the East (right) of satellite V.
-
Clue (iii): The Bio-Payload Synthesizer satellite is positioned as many slots to the West (left) of satellite P as satellite S is positioned to the East (right) of the Atmospheric Chemistry satellite.
-
Clue (iv): Satellite R is positioned immediately to the East (right) of satellite T.
-
Clue (v): The satellites carrying the Quantum Magnetometer and Geospatial Radar occupy the first and sixth positions from the East (right) end of the orbital track.
-
Clue (vi): The satellite carrying the Electromagnetic Sounder is positioned at the fourth slot to the East (right) of the satellite carrying the Astrophysics Observatory.
Question 13
Satellite Q CANNOT carry which of the following scientific payloads?
(1) Bio-Payload Synthesizer
(2) Atmospheric Chemistry
(3) Electromagnetic Sounder
(4) Quantum Magnetometer
Question 14
If the number of satellites situated between Q and T is identical to the number of satellites situated between U and P, then satellite Q carries which payload?
(1) Bio-Payload Synthesizer
(2) Electromagnetic Sounder
(3) Astrophysics Observatory
(4) This arrangement is not possible
Question 15
Which of the following pairs of satellites can NEVER be situated immediately adjacent to each other?
(1) Q and T
(2) R and P
(3) U and S
(4) S and T
Question 16
How many distinct valid configurations of satellites and payloads are possible across the constellation?
(1) 2
(2) 3
(3) 5
(4) More than 5
Show solution
Step-by-Step Deductive Solution
1. Payload Slot Constraints & Anchor Placement
Let the orbital slots be indexed from West to East (left to right).
-
Right-End Anchors (Clue v):
-
First position from right end .
-
Sixth position from right end .
-
Thus, Slots 2 and 7 are occupied by .
-
-
Astrophysics & Electromagnetic Sounder (Clue vi):
-
Since Slot 2 is Magnetometer/Radar, Astro cannot be at Slot 2 (which would place EM at Slot 6).
-
Since Slot 7 is Magnetometer/Radar, EM cannot be at Slot 7 (which would require Astro at Slot 3).
-
Therefore, the only available placement is:
-
-
Satellite V and Infrared Radiometer (Clue ii):
-
Since Slot 5 is EM, IR cannot be at Slot 5 (which would require V at Slot 1).
-
If , then .
-
If , then (conflict with Slot 7 payload).
-
Thus: Satellite V is at Slot 2, and Slot 6 carries Infrared Radiometer (IR)!
-
2. Satellite Positioning & Clue Interaction
Current payload map:
-
Slot 1: Astrophysics
-
Slot 2: Satellite V (Magnetometer or Radar)
-
Slot 3: Available
-
Slot 4: Available
-
Slot 5: Electromagnetic Sounder
-
Slot 6: Infrared Radiometer
-
Slot 7: Radar or Magnetometer
Remaining payloads for Slots 3 and 4: .
-
Clue (iv): .
-
Clue (i): Count of satellites West of R count of satellites East of Bio-Payload:
Let us evaluate the two assignments for across Slots 3 and 4:
-
Case Alpha: Slot 3 = Chemistry, Slot 4 = Bio-Payload:
-
.
-
But .
-
Now check Clue (iii):
-
Open slots for P and S: Slots 5, 6, 7.
-
Subcase 1: . Then , and . Perfect match!
- Remaining slots for : Slots 1 and 7.
-
Subcase 2: . Then , and . Perfect match!
- Remaining slots for : Slots 1 and 5.
-
-
-
Case Beta: Slot 3 = Bio-Payload, Slot 4 = Chemistry:
-
.
-
Then .
-
Now check Clue (iii):
-
Open slots for P and S: Slots 6 and 7.
-
Setting and . Perfect match!
-
Remaining slots for : Slots 1 and 3.
-
-
Summary of Valid Arrangements
In all valid arrangements:
-
Slot 1 is always Q or U (Astrophysics).
-
Slot 2 is always V (Magnetometer or Radar).
-
Atmospheric Chemistry is at Slot 3 or Slot 4 (where T or R is positioned).
-
S and T are separated by at least 1 slot (never adjacent).
| Config | Slot 1 | Slot 2 | Slot 3 | Slot 4 | Slot 5 | Slot 6 | Slot 7 |
|---|---|---|---|---|---|---|---|
| Alpha-1 | Q / U | V | T (Chem) | R (Bio) | S (EM) | P (IR) | U / Q |
| Alpha-2 | Q / U | V | T (Chem) | R (Bio) | U / Q | S (IR) | P |
| Beta-1 | Q / U | V | U / Q (Bio) | T (Chem) | R (EM) | P (IR) | S |
Question-by-Question Answers
Question 13:
-
Atmospheric Chemistry is strictly located at Slot 3 (occupied by T) or Slot 4 (occupied by T).
-
Satellite Q only occupies Slot 1, Slot 3 (Bio-Payload), Slot 5, or Slot 7.
-
Thus, Satellite Q CANNOT carry Atmospheric Chemistry.
-
Correct Choice: (2) Atmospheric Chemistry
Question 14:
-
Condition: .
-
Under Config Alpha-1: . If :
If :
-
Under Config Alpha-2: . If :
Here is at Slot 1 (Astrophysics Observatory).
-
Under Config Beta-1: . If :
Here is at Slot 1 (Astrophysics Observatory).
-
In every matching configuration, Q is at Slot 1, carrying the Astrophysics Observatory.
-
Correct Choice: (3) Astrophysics Observatory
Question 15:
-
In all configurations, T is at Slot 3 or Slot 4, while S is at Slot 5, 6, or 7.
-
Under Alpha-1: (separated by R).
-
Under Alpha-2: (separated by R and U/Q).
-
Under Beta-1: (separated by R and P).
-
Hence, S and T can never stand adjacent to each other.
-
Correct Choice: (4) S and T
Question 16:
-
There are 3 distinct base positional templates, each with 2 permutations for and 2 orientations for .
-
This yields at least distinct valid configurations (or 12 including payload swapping).
-
Correct Choice: (4) More than 5
Solved Example Set 5: Questions 17 to 20 (AI Governance Steering Committee Conference Seating)
Directions for Questions 17 to 20
An executive steering committee of an advanced AI research consortium consists of six male delegates—Kiran, Pranav, Rohan, Rishi, Aryan, and Axel—and two female delegates—Pari and Ananya.
They convene around a rectangular conference table equipped with eight numbered interactive terminals arranged in two opposing rows of four:
| North Side (Facing Inward ↓) | |||
|---|---|---|---|
| Terminal 1 | Terminal 2 | Terminal 3 | Terminal 4 |
| — Executive Conference Table — | |||
| Terminal 8 | Terminal 7 | Terminal 6 | Terminal 5 |
| South Side (Facing Inward ↑) | |||
Seating protocol enforces the following rules:
-
Clue I: The two female delegates (Pari and Ananya) are seated on opposite sides of the conference table, but they are NOT seated directly opposite each other. Furthermore, neither female delegate occupies a corner terminal (Terminals 1, 4, 5, or 8).
-
Clue II: Rishi and Pranav occupy diagonally opposite corner terminals.
-
Clue III: Axel is seated at Terminal 4.
-
Clue IV: Rohan and Kiran are seated on the same side of the table, but they are NOT seated adjacent to each other.
Question 17
Which terminal is occupied by Aryan?
(1) Terminal 2
(2) Terminal 8
(3) Terminal 7
(4) Cannot be determined
Question 18
If Rohan and Pari are seated on opposite sides of the conference table, which terminal is occupied by Ananya?
(1) Terminal 2
(2) Terminal 3
(3) Terminal 7
(4) Cannot be determined
Question 19
Who is seated at Terminal 8?
(1) Rohan
(2) Kiran
(3) Aryan
(4) Cannot be determined
Question 20
Which of the following pairs of delegates can NEVER be seated immediately adjacent to each other?
(1) Aryan and Ananya
(2) Kiran and Pari
(3) Rishi and Ananya
(4) None of these
Show solution
Step-by-Step Deductive Solution
1. Geometry & Coordinate Setup
-
Corner Terminals: 1, 4 (North side); 5, 8 (South side).
-
Interior / Middle Terminals: 2, 3 (North side); 6, 7 (South side).
-
Directly Opposing Terminal Pairs: .
-
Diagonally Opposite Corner Pairs: and .
2. Constraint Propagation & Terminal Assignments
-
Diagonally Opposite Corners (Clue II & III):
-
Axel occupies Terminal 4 (Clue III).
-
This eliminates the diagonal pair for Rishi and Pranav.
-
Therefore, Rishi and Pranav MUST occupy the diagonal pair Terminal 1 and Terminal 5 (in either order: and ).
-
-
Rohan and Kiran's Side (Clue IV):
-
Rohan and Kiran sit on the same side, but NOT adjacent to each other.
-
Non-adjacent seat pairs on a 4-terminal side are: or .
-
On the North side (Terminals 1, 2, 3, 4):
-
Terminal 1 is occupied by Rishi/Pranav.
-
Terminal 4 is occupied by Axel.
-
The only open seats on the North side are 2 and 3, which are adjacent!
-
Hence, Rohan and Kiran CANNOT sit on the North side.
-
-
Therefore, Rohan and Kiran MUST sit on the South side (Terminals 5, 6, 7, 8).
-
On the South side, Terminal 5 is occupied by Pranav/Rishi.
-
The only non-adjacent pair left on the South side is Terminal 8 and Terminal 6!
-
Thus: .
-
-
Positioning the Two Female Delegates (Clue I):
-
Open terminals on South side: Terminal 7.
-
Open terminals on North side: Terminals 2 and 3.
-
Neither female delegate can occupy a corner terminal (Ruling out 1, 4, 5, 8).
-
Since the two female delegates sit on opposite sides, one female delegate must sit on the South side, which leaves Terminal 7 as her only possible seat!
-
The other female delegate must sit on the North side (Terminal 2 or 3).
-
Clue I states they CANNOT sit directly opposite each other.
-
Terminal 7 is directly opposite Terminal 2.
-
Therefore, the female delegate on the North side CANNOT sit at Terminal 2; she MUST sit at Terminal 3!
-
Thus: .
-
-
Assigning Aryan:
-
The only unassigned terminal on the entire table is Terminal 2.
-
The only unassigned delegate is Aryan.
-
Therefore, Aryan MUST occupy Terminal 2!
-
Master Boardroom Seating Grid
| Terminal 1 | Terminal 2 | Terminal 3 | Terminal 4 |
|---|---|---|---|
| Rishi or Pranav | Aryan | Pari or Ananya | Axel |
| — Table Center — | |||
| Rohan or Kiran | Pari or Ananya | Rohan or Kiran | Pranav or Rishi |
| Terminal 8 | Terminal 7 | Terminal 6 | Terminal 5 |
Question-by-Question Answers
Question 17:
-
Terminal 2 is uniquely occupied by Aryan.
-
Correct Choice: (1) Terminal 2
Question 18:
-
Rohan is seated on the South side (Terminal 6 or Terminal 8).
-
If Rohan and Pari are on opposite sides, Pari must sit on the North side (Terminal 3).
-
Consequently, Ananya must occupy the remaining female slot on the South side: Terminal 7.
-
Correct Choice: (3) Terminal 7
Question 19:
-
Terminal 8 is occupied by either Rohan or Kiran, which cannot be determined without further clues.
-
Correct Choice: (4) Cannot be determined
Question 20:
-
Inspect each candidate pair:
-
Aryan (Terminal 2) is adjacent to Terminal 1 and Terminal 3 (can be Ananya). Possible.
-
Kiran (Terminal 6 or 8) is adjacent to Terminal 7 (can be Pari). Possible.
-
Rishi occupies Terminal 1 (adjacent only to 2) or Terminal 5 (adjacent only to 6). Ananya is strictly at Terminal 3 or Terminal 7. Neither Terminal 1 nor Terminal 5 is adjacent to Terminal 3 or Terminal 7!
-
-
Therefore, Rishi and Ananya can NEVER sit adjacent to each other.
-
Correct Choice: (3) Rishi and Ananya
Practice questions
Question 1 · Foundation
Diagnostic Set: Linear Row Separation
In an automated semiconductor fab testing corridor, eight microchips labeled are positioned along a linear test conveyor from West to East in slots 1 to 8.
-
Chip is located at Slot 6.
-
Chip is positioned 4 places to the West (left) of Chip .
-
Exactly two chips are situated between Chip and Chip .
-
Chip is situated to the East (right) of Chip .
Which slot on the test conveyor is occupied by Chip ?
Show answer and explanation
Answer: (B) Slot 5
Step-by-Step Derivation:
-
Chip is anchored at Slot 6: .
-
is 4 places to the left of : .
-
Exactly two chips are situated strictly between and :
-
Since is to the right of , we add the offset:
Therefore, Chip is located at Slot 5.
Question 2 · Foundation
Diagnostic Set: Dual Opposing Parallel Rows
In a modular data center corridor, six server units are arranged in two parallel rows of three units each, facing each other across a central airflow aisle:
-
Row 1 (Units A, B, C) faces South.
-
Row 2 (Units D, E, F) faces North.
-
Each unit in Row 1 directly faces a corresponding unit in Row 2.
-
Unit A is at the extreme right end of Row 1 (from the perspective of an observer standing in Row 1 facing South).
-
Unit D is situated directly opposite Unit B.
-
Unit F sits to the immediate left of Unit D (from the perspective of an observer standing in Row 2 facing North).
Which server unit in Row 1 directly faces Unit F?
Show answer and explanation
Answer: (A) Unit A
Step-by-Step Derivation:
-
Row 1 Perspective (Facing South):
-
Facing South, looking into the aisle: the observer's right hand points West (towards Slot 1), and left hand points East (towards Slot 3).
-
Unit A is at the extreme right end of Row 1 Unit A is at Slot 1 (West end).
-
-
Opposing Relationship:
-
Unit D is directly opposite Unit B. Neither can be Unit A (which is at Slot 1).
-
Thus, B and D must occupy either Slot 2 (Center) or Slot 3 (East).
-
-
Row 2 Perspective (Facing North):
-
Facing North: the observer's left hand points West (Slot 1), and right hand points East (Slot 3).
-
Unit F sits to the immediate left of Unit D .
-
For Unit D to have an immediate left neighbor in a 3-unit row, Unit D MUST be at Slot 2 (Center).
-
This places Unit F at Slot 1 (West end of Row 2).
-
-
Direct Line-of-Sight Alignment:
-
Unit A is at Slot 1 of Row 1.
-
Unit F is at Slot 1 of Row 2.
-
Therefore, Unit F directly faces Unit A.
-
Question 3 · Foundation
Diagnostic Set: Circular Inward-Facing Network Ring
Six distributed consensus nodes () are positioned sequentially around a circular ring network in nodes numbered 1 to 6 in clockwise order. All six nodes face inward toward the central ring arbiter.
-
Node is positioned at Slot 1.
-
Node is diametrically opposite Node .
-
Node is situated second to the right of Node (from 's inward-facing perspective).
-
Node is an immediate neighbor of Node , but is not adjacent to Node .
Which slot on the network ring is occupied by Node ?
Show answer and explanation
Answer: (B) Slot 3
Step-by-Step Derivation:
-
Inward-Facing Orientation Rule:
-
For an observer seated at Slot 1 facing inward toward the center, turning to their 'right' moves in the counter-clockwise (CCW) direction (decreasing slot indices: ).
-
Moving to their 'left' moves in the clockwise (CW) direction ().
-
-
Diametric Opposition:
- In a 6-slot circle, opposite of Slot 1 is . Thus, occupies Slot 4.
-
Second to the Right of :
-
1st to the right (CCW) is Slot 6.
-
2nd to the right (CCW) is Slot 5.
-
Thus, occupies Slot 5.
-
-
Neighbor of (Slot 4):
-
The two immediate neighbors of Slot 4 are Slot 3 and Slot 5.
-
Since Slot 5 is already occupied by , and cannot be adjacent to , cannot be at Slot 5.
-
Therefore, must occupy Slot 3.
-
Question 4 · Foundation
Diagnostic Set: Polygonal Mixed-Orientation Vertices
Four automated surveillance nodes () defend the perimeter of a secure data vault at the four vertices of a square layout labeled 1, 2, 3, 4 in clockwise order (Vertex 1 = North/Top, Vertex 2 = East/Right, Vertex 3 = South/Bottom, Vertex 4 = West/Left).
-
Node is stationed at Vertex 1 and faces outward (away from the vault center).
-
Node is stationed at Vertex 2 and faces inward (toward the vault center).
-
Sentinel Unit X is stationed to the immediate left of Node (from 's perspective).
-
Sentinel Unit Y is stationed to the immediate left of Node (from 's perspective).
Which vertices are occupied by Sentinel Unit X and Sentinel Unit Y respectively?
Show answer and explanation
Answer: (B) Vertex 4 and Vertex 3
Step-by-Step Derivation:
-
Vertex Geometry (Clockwise):
-
Vertex 1: North (12 o'clock)
-
Vertex 2: East (3 o'clock)
-
Vertex 3: South (6 o'clock)
-
Vertex 4: West (9 o'clock)
-
-
Evaluating Node (Vertex 1, Facing Outward):
-
Stationed at North (Vertex 1) looking outward (facing North/away from center).
-
Looking North, the observer's left hand points toward West (Vertex 4).
-
Thus, the immediate left of Node is Vertex 4 Sentinel Unit X is at Vertex 4.
-
-
Evaluating Node (Vertex 2, Facing Inward):
-
Stationed at East (Vertex 2) looking inward (facing West/toward center).
-
Looking West, the observer's left hand points toward South (Vertex 3).
-
Thus, the immediate left of Node is Vertex 3 Sentinel Unit Y is at Vertex 3.
-
-
Conclusion:
- Sentinel Unit X is at Vertex 4, and Sentinel Unit Y is at Vertex 3.
Question 5 · Foundation
Diagnostic Set: Conference Table Topological Exclusion
Eight executive delegates sit around a rectangular conference table with three seats on each of the two longer sides (North side: seats 1, 2, 3 from left to right; South side: seats 6, 5, 4 from left to right, such that seat 1 directly faces seat 6, seat 2 directly faces seat 5, and seat 3 directly faces seat 4) and one seat on each of the two shorter ends (East end: seat 7; West end: seat 8).
-
Delegate Alpha occupies seat 2 (the middle seat of the North side).
-
Delegate Beta sits directly opposite Delegate Alpha.
-
Delegate Gamma occupies the West end (seat 8).
-
Delegate Delta must be assigned to a seat that is neither opposite nor immediately adjacent to Delegate Alpha or Delegate Beta.
Which seat can Delegate Delta occupy?
Show answer and explanation
Answer: (D) Seat 7
Step-by-Step Derivation:
-
Directly Opposing Pair:
-
Delegate Alpha occupies seat 2.
-
Delegate Beta sits directly opposite Alpha Beta occupies seat 5.
-
-
Occupied Seats:
-
Alpha is at seat 2.
-
Beta is at seat 5.
-
Gamma is at seat 8.
-
-
Adjacency & Opposite Exclusion Analysis:
-
Seats excluded by Alpha (seat 2):
-
Adjacent to Alpha: seats 1 and 3.
-
Directly opposite Alpha: seat 5 (already Beta).
-
-
Seats excluded by Beta (seat 5):
-
Adjacent to Beta: seats 6 and 4.
-
Directly opposite Beta: seat 2 (already Alpha).
-
-
Already occupied seat: seat 8 (Gamma).
-
-
Evaluating Remaining Seats:
-
Full seat universe: .
-
Excluded seats: .
-
The only remaining seat in the entire layout is Seat 7 (the East end).
-
-
Therefore, Delegate Delta must occupy Seat 7.
Try real CAT questions
Study this concept with interactive practice in PrepSoc.
Open the concept library